[Thu Jan  5 19:37:32 2012] Detection parameters:
  Position = (324.9, 321.0) = 18 53 1.37 -8 41 54.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1826.1 +/- 78.2
  Background counts = 105.2
  Rate = 0.06 +/- 0.003

[Thu Jan  5 19:37:32 2012] Off-axis axis estimate = 2.52'
[Thu Jan  5 21:07:58 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 21:07:58 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Thu Jan  5 21:07:58 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.584
[Thu Jan  5 21:07:58 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 7.69"
[Fri Jan  6 02:37:16 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_src5.ximg exists
[Fri Jan  6 02:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_src5.csv
[Fri Jan  6 02:37:16 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri Jan  6 02:37:16 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_src5.csv
[Fri Jan  6 02:37:16 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 02:37:17 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri Jan  6 02:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jan  6 02:37:17 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri Jan  6 02:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_tfrozen_src5.csv
[Fri Jan  6 02:37:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 02:37:37 2012] Warning, spatial fit 5 centroid is now closest to src. 13
[Fri Jan  6 02:37:37 2012] Source 7 is offset by 5.348534 and -2.706516 pixels which is larger than
2 X fitted extent = 2.205922 x 2.205922, not incorporating fit results
[Fri Jan  6 02:37:37 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 02:37:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 02:37:37 2012] Assessing source extent using major
[Fri Jan  6 02:37:37 2012] Source does appear to be extended
[Fri Jan  6 02:37:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 02:37:37 2012] Source is confused with source 4
[Fri Jan  6 03:22:52 2012] Using EEF radius (= 7.69 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 03:22:52 2012] Initial guess for spatial extent in simple fitting = 7.69"
[Fri Jan  6 03:22:52 2012] source mask rpix=1.8, npix_max = 20, mask sum = 12, frac = 0.584
[Fri Jan  6 03:22:52 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 7.69"
[Fri Jan  6 10:45:02 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_src5.ximg exists
[Fri Jan  6 10:45:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_src5.csv
[Fri Jan  6 10:45:02 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri Jan  6 10:45:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_src5.csv
[Fri Jan  6 10:45:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 10:45:02 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri Jan  6 10:45:02 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri Jan  6 10:45:02 2012] Fit fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri Jan  6 10:45:17 2012] Spatial fit model total counts = 37262.300000, observed total counts = 44160.000000
[Fri Jan  6 10:45:17 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jan  6 10:45:17 2012] Warning, spatial fit 5 centroid is now closest to src. 4
[Fri Jan  6 10:45:17 2012] Warning: source 25 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 49.776724 pixels away
[Fri Jan  6 10:45:17 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 10:45:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 10:45:17 2012] Assessing source extent using major
[Fri Jan  6 10:45:17 2012] Source does appear to be extended
[Fri Jan  6 10:45:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 11:31:37 2012] Counts = 1826.088379, rescaling region sizes by 2.000000
[Fri Jan  6 11:31:37 2012] XMMSAS src. selection expression = ellipse(28215.590485, 27877.337097, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri Jan  6 11:31:37 2012] Writing source region out to fullrun_mos2_xmm0154150501_pi300-10000_pass1_cl_src7_src.reg
[Fri Jan  6 11:31:37 2012] Extracting stamp from image fullrun_mos2_xmm0154150501_pi300-10000_cl_sm2.00.img.gz, (250, 246) - (400, 396)
[Fri Jan  6 11:31:37 2012] XMMSAS bgd. selection expression = annulus(28215.590485, 27877.337097, 4350.000000, 8700.000000, X, Y) && !ellipse(27189.250760, 27348.995720, 2655.792076, 2655.792076, 0.000000, X, Y) && !ellipse(28171.169189, 26997.816162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28009.000000, 26568.057190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28196.137085, 27427.484863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28508.065000, 23761.580800, 323.171209, 323.171209, 0.000000, X, Y) && !ellipse(27296.532000, 26056.326000, 483.020814, 483.020814, 0.000000, X, Y) && !ellipse(28846.574000, 29283.102000, 1257.064036, 1257.064036, 0.000000, X, Y) && !ellipse(25271.123169, 27986.872986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26576.749756, 36134.433075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26225.437214, 29339.792640, 406.896012, 406.896012, 0.000000, X, Y) && !ellipse(27828.498600, 32286.209200, 977.744028, 977.744028, 0.000000, X, Y) && !ellipse(26906.232000, 24518.112000, 1169.384034, 1169.384034, 0.000000, X, Y) && !ellipse(28207.148000, 33486.712000, 1520.472044, 888.272026, 340.637000, X, Y) && !ellipse(26476.966000, 23714.314000, 2338.768067, 2338.768067, 0.000000, X, Y) && !ellipse(26500.271637, 22418.854401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27718.624340, 31007.899120, 983.344028, 983.344028, 0.000000, X, Y) && !ellipse(27817.323600, 32095.130000, 918.800026, 918.800026, 0.000000, X, Y) && !ellipse(27632.972400, 30278.304000, 1966.688057, 1966.688057, 0.000000, X, Y)
[Fri Jan  6 11:31:37 2012] Writing fullrun_mos2_xmm0154150501_pi300-10000_pass1_cl_src7.gif
[Fri Jan  6 12:05:06 2012] Mean detx,y = (-54.25, 70.69) 
[Fri Jan  6 12:05:11 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 12:10:55 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 12:10:56 2012] Setting source spectrum file to fullrun_mos2_xmm0154150501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri Jan  6 12:10:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0154150501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Fri Jan  6 12:47:22 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri Jan  6 12:47:22 2012] rmf not generated due to insufficient counts
[Sat Jan  7 03:22:52 2012] Updating aperture counts using extracted products
[Sat Jan  7 03:22:52 2012] Error reading totcts from fullrun_mos2_xmm0154150501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Sat Jan  7 03:22:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan  7 03:22:54 2012] Using photon index=1.80, rate=0.0616, arf fullrun_mos2_xmm0154150501_pi300-10000_pass1_cl_src7.arf
[Sat Jan  7 03:22:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan  7 03:22:54 2012] Updating source flux to 5.6e-13
[Sat Jan  7 03:24:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting