[Thu Jan  5 19:37:32 2012] Detection parameters:
  Position = (307.9, 276.1) = 18 53 6.35 -8 45 10.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 141.7 +/- 21.5
  Background counts = 102.3
  Rate = 0.005 +/- 0.0007

[Thu Jan  5 19:37:32 2012] Off-axis axis estimate = 1.76'
[Thu Jan  5 21:07:58 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Thu Jan  5 21:07:58 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Thu Jan  5 21:07:58 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Thu Jan  5 21:07:58 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 7.31"
[Fri Jan  6 02:37:17 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_src20.ximg exists
[Fri Jan  6 02:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_src20.csv
[Fri Jan  6 02:37:17 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_src20_1.ximg exists
[Fri Jan  6 02:37:17 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_src20.csv
[Fri Jan  6 02:37:17 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 02:37:17 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Fri Jan  6 02:37:17 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Fri Jan  6 02:37:17 2012] Fit fullrun_mos2_xmm0154150501_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Fri Jan  6 02:37:37 2012] Warning, spatial fit 20 centroid is now closest to src. 18
[Fri Jan  6 02:37:37 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 02:37:37 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 02:37:37 2012] Assessing source extent using major
[Fri Jan  6 02:37:37 2012] Source does appear to be extended
[Fri Jan  6 02:37:37 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 02:37:37 2012] Source is confused with source 18
[Fri Jan  6 03:22:52 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Fri Jan  6 03:22:52 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Fri Jan  6 03:22:52 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Fri Jan  6 03:22:52 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 7.31"
[Fri Jan  6 10:45:02 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_src19.ximg exists
[Fri Jan  6 10:45:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_src19.csv
[Fri Jan  6 10:45:02 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Jan  6 10:45:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_src19.csv
[Fri Jan  6 10:45:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jan  6 10:45:03 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Jan  6 10:45:03 2012] fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Jan  6 10:45:03 2012] Fit fullrun_mos2_xmm0154150501_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Fri Jan  6 10:45:17 2012] Spatial fit model total counts = 2895.880000, observed total counts = 2896.000000
[Fri Jan  6 10:45:17 2012] Offset between fit and detection position for source 28 = 4.216271 pixels
[Fri Jan  6 10:45:17 2012] Warning, changing simple spatial fit ID from 19 to 16
[Fri Jan  6 10:45:17 2012] 2938.470000 total counts/ 1810.360000 bgd. counts: snr = 26.513617
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 4.216271 pixels
  Position = (304.9, 273.1) = 18 53 7.24 -8 45 21.7
  Extent = 29.2 (29.2-58.5)", rotation angle = 0
  Source counts = 1128.1 +/- 54.2
  Background counts = 1810.4
  Rate = 0.04 +/- 0.002
[Fri Jan  6 10:45:17 2012] Vigneting correction estimate = 1.000000
[Fri Jan  6 10:45:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jan  6 10:45:17 2012] Assessing source extent using major axis lower bound
[Fri Jan  6 10:45:17 2012] Source does appear to be extended
[Fri Jan  6 10:45:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jan  6 11:31:37 2012] Counts = 1128.110000, rescaling region sizes by 2.000000
[Fri Jan  6 11:31:37 2012] XMMSAS src. selection expression = ellipse(26476.966000, 23714.314000, 3508.152101, 3508.152101, 0.000000, X, Y)
[Fri Jan  6 11:31:37 2012] Writing source region out to fullrun_mos2_xmm0154150501_pi300-10000_pass1_cl_src28_src.reg
[Fri Jan  6 11:31:37 2012] Extracting stamp from image fullrun_mos2_xmm0154150501_pi300-10000_cl_sm2.00.img.gz, (103, 72) - (507, 475)
[Fri Jan  6 11:31:37 2012] XMMSAS bgd. selection expression = annulus(26476.966000, 23714.314000, 11693.840336, 23387.680673, X, Y) && !ellipse(27189.250760, 27348.995720, 2655.792076, 2655.792076, 0.000000, X, Y) && !ellipse(28171.169189, 26997.816162, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28009.000000, 26568.057190, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28196.137085, 27427.484863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28215.590485, 27877.337097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28508.065000, 23761.580800, 323.171209, 323.171209, 0.000000, X, Y) && !ellipse(27296.532000, 26056.326000, 483.020814, 483.020814, 0.000000, X, Y) && !ellipse(28846.574000, 29283.102000, 1257.064036, 1257.064036, 0.000000, X, Y) && !ellipse(25271.123169, 27986.872986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26576.749756, 36134.433075, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27835.000000, 17683.419815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26225.437214, 29339.792640, 406.896012, 406.896012, 0.000000, X, Y) && !ellipse(29589.823800, 40107.770200, 509.432074, 509.432074, 0.000000, X, Y) && !ellipse(27828.498600, 32286.209200, 977.744028, 977.744028, 0.000000, X, Y) && !ellipse(26906.232000, 24518.112000, 1169.384034, 1169.384034, 0.000000, X, Y) && !ellipse(28207.148000, 33486.712000, 1520.472044, 888.272026, 340.637000, X, Y) && !ellipse(26500.271637, 22418.854401, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27718.624340, 31007.899120, 983.344028, 983.344028, 0.000000, X, Y) && !ellipse(27817.323600, 32095.130000, 918.800026, 918.800026, 0.000000, X, Y) && !ellipse(27632.972400, 30278.304000, 1966.688057, 1966.688057, 0.000000, X, Y)
[Fri Jan  6 11:31:37 2012] Writing fullrun_mos2_xmm0154150501_pi300-10000_pass1_cl_src28.gif
[Fri Jan  6 12:24:49 2012] Mean detx,y = (111.09, -1241.38) 
[Fri Jan  6 12:24:55 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jan  6 12:38:57 2012] Binned source spectrum to 10 counts/bin
[Fri Jan  6 12:38:57 2012] Setting source spectrum file to fullrun_mos2_xmm0154150501_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Fri Jan  6 12:38:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0154150501_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Jan  7 03:22:53 2012] Updating aperture counts using extracted products
[Sat Jan  7 03:22:53 2012] Error reading totcts from fullrun_mos2_xmm0154150501_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Jan  7 03:22:54 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jan  7 03:22:54 2012] Using photon index=1.80, rate=0.0414, arf fullrun_mos2_xmm0154150501_pi300-10000_pass1_cl_src28.arf
[Sat Jan  7 03:22:54 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jan  7 03:22:54 2012] Updating source flux to 3.6e-13
[Sat Jan  7 03:24:31 2012] Flag c found in src. 28 procflags, skipping spectral fitting