[Mon Jun  4 10:11:03 2012] Detection parameters:
  Position = (292.0, 281.1) = 11 4 23.88 38 11 7.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 216.0 +/- 21.2
  Background counts = 14.8
  Rate = 0.02 +/- 0.002

[Mon Jun  4 10:11:05 2012] Off-axis axis estimate = 1.34'
[Mon Jun  4 13:14:29 2012] Using EEF radius (= 7.10 ")to estimate initial spatial extent for simple fitting
[Mon Jun  4 13:14:29 2012] Initial guess for spatial extent in simple fitting = 7.10"
[Mon Jun  4 13:14:29 2012] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.880
[Mon Jun  4 13:14:29 2012] Giving source the simple spatial ID 14 for pass 0, mean size = 7.10"
[Mon Jun  4 19:59:59 2012] fullrun_mos2_xmm0153951201_pi300-10000_cl_pass0_src14.ximg exists
[Mon Jun  4 19:59:59 2012] fullrun_mos2_xmm0153951201_pi300-10000_cl_pass0_src14_1.ximg exists
[Mon Jun  4 19:59:59 2012] Fit fullrun_mos2_xmm0153951201_pi300-10000_cl_pass0_src14 appears to have run properly
[Mon Jun  4 20:00:01 2012] fullrun_mos2_xmm0153951201_pi300-10000_cl_pass0_tfrozen_src14.ximg exists
[Mon Jun  4 20:00:01 2012] fullrun_mos2_xmm0153951201_pi300-10000_cl_pass0_tfrozen_src14_1.ximg exists
[Mon Jun  4 20:00:01 2012] Fit fullrun_mos2_xmm0153951201_pi300-10000_cl_pass0_tfrozen_src14 appears to have run properly
[Mon Jun  4 20:00:30 2012] Spatial fit model total counts = 1336.590000, observed total counts = 1269.000000
[Mon Jun  4 20:00:30 2012] Offset between fit and detection position for source 18 = 7.327578 pixels
[Mon Jun  4 20:00:30 2012] 1336.341000 total counts/ 776.672000 bgd. counts: snr = 20.082253
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 7.327578 pixels
  Position = (288.2, 287.4) = 11 4 25.27 38 11 33.3
  Extent = 14.2 (14.2-28.4)", rotation angle = 0
  Source counts = 559.7 +/- 36.6
  Background counts = 776.7
  Rate = 0.06 +/- 0.004
[Mon Jun  4 20:00:30 2012] Vigneting correction estimate = 1.000000
[Mon Jun  4 20:00:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun  4 20:00:30 2012] Assessing source extent using major axis lower bound
[Mon Jun  4 20:00:30 2012] Source does appear to be extended
[Mon Jun  4 20:00:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun  4 20:00:31 2012] Source is confused with source 20
[Mon Jun  4 22:30:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun  4 22:30:32 2012] Initial guess for spatial extent in simple fitting = 14.20"
[Mon Jun  4 22:30:32 2012] source mask rpix=3.3, npix_max = 56, mask sum = 55, frac = 0.970
[Mon Jun  4 22:30:32 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 14.20"
[Tue Jun  5 06:07:14 2012] fullrun_mos2_xmm0153951201_pi300-10000_cl_pass1_src14.ximg exists
[Tue Jun  5 06:07:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153951201_pi300-10000_cl_pass1_src14.csv
[Tue Jun  5 06:07:14 2012] fullrun_mos2_xmm0153951201_pi300-10000_cl_pass1_src14_1.ximg exists
[Tue Jun  5 06:07:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153951201_pi300-10000_cl_pass1_src14.csv
[Tue Jun  5 06:07:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153951201_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153951201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 06:07:15 2012] fullrun_mos2_xmm0153951201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Tue Jun  5 06:07:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153951201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Tue Jun  5 06:07:15 2012] fullrun_mos2_xmm0153951201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Tue Jun  5 06:07:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153951201_pi300-10000_cl_pass1_tfrozen_src14.csv
[Tue Jun  5 06:07:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153951201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153951201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jun  5 06:07:35 2012] Spatial fit model total counts = 1267.590000, observed total counts = 1168.000000
[Tue Jun  5 06:07:35 2012] Offset between fit and detection position for source 18 = 7.585434 pixels
[Tue Jun  5 06:07:35 2012] Warning, changing simple spatial fit ID from 14 to 13
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 7.585434 pixels
  Position = (291.0, 280.3) = 11 4 24.23 38 11 2.7
  Extent = 27.7 (26.2-30.3)", rotation angle = 0
  Source counts = 1244.4 +/- 35.3
  Background counts = 0.0
  Rate = 0.1 +/- 0.004
[Tue Jun  5 06:07:35 2012] Vigneting correction estimate = 1.000000
[Tue Jun  5 06:07:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jun  5 06:07:35 2012] Assessing source extent using major axis lower bound
[Tue Jun  5 06:07:35 2012] Source does appear to be extended
[Tue Jun  5 06:07:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jun  5 09:05:42 2012] Counts = 1244.400000, rescaling region sizes by 2.000000
[Tue Jun  5 09:05:42 2012] XMMSAS src. selection expression = ellipse(25270.744000, 24338.554000, 3320.172096, 3320.172096, 0.000000, X, Y)
[Tue Jun  5 09:05:42 2012] Writing source region out to fullrun_mos2_xmm0153951201_pi300-10000_pass1_cl_src18_src.reg
[Tue Jun  5 09:05:42 2012] Extracting stamp from image fullrun_mos2_xmm0153951201_pi300-10000_cl_sm2.00.img.gz, (100, 89) - (482, 471)
[Tue Jun  5 09:05:42 2012] XMMSAS bgd. selection expression = annulus(25270.744000, 24338.554000, 11067.240318, 22134.480637, X, Y) && !ellipse(24457.553040, 26299.794000, 2212.224064, 2212.224064, 0.000000, X, Y) && !ellipse(23565.450043, 26037.863770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23827.363373, 25679.764038, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23499.844269, 26464.006592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22991.164190, 29399.951003, 1295.800037, 619.377108, 89.804164, X, Y) && !ellipse(27213.956000, 20669.024000, 1525.488044, 1525.488044, 0.000000, X, Y) && !ellipse(23131.448000, 28900.298000, 1263.168036, 1263.168036, 0.000000, X, Y) && !ellipse(23895.272000, 27438.594000, 1232.960035, 1232.960035, 0.000000, X, Y) && !ellipse(27022.010000, 21033.258000, 1441.896041, 1441.896041, 0.000000, X, Y) && !ellipse(26484.758000, 22179.402000, 1253.048036, 1253.048036, 0.000000, X, Y) && !ellipse(26030.102200, 22997.734000, 1029.160030, 1029.160030, 0.000000, X, Y) && !ellipse(29225.234000, 16760.766000, 1643.304047, 1643.304047, 0.000000, X, Y) && !ellipse(25725.726000, 23594.250000, 1217.216035, 1217.216035, 0.000000, X, Y) && !ellipse(23420.129669, 28396.610382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27641.270477, 19813.136963, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23221.079468, 26998.920654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29018.860000, 16823.488000, 3583.944103, 3583.944103, 0.000000, X, Y) && !ellipse(25379.549255, 27783.715454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24280.226410, 24825.261444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32414.444977, 10048.556503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31171.733800, 12832.622200, 3633.040105, 1057.816030, 65.738800, X, Y) && !ellipse(31266.160000, 12803.144000, 1550.544045, 1550.544045, 0.000000, X, Y) && !ellipse(22086.912000, 27747.932000, 1264.888036, 1264.888036, 0.000000, X, Y) && !ellipse(26217.088867, 26071.160492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26249.493500, 25283.195587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30531.539800, 14159.943400, 1583.456046, 232.394407, 66.163000, X, Y) && !ellipse(31435.976660, 12239.578200, 3949.152114, 966.808028, 65.204000, X, Y) && !ellipse(32820.306000, 9494.520000, 1953.808056, 1953.808056, 0.000000, X, Y) && !ellipse(23014.029663, 30593.872803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19297.745331, 28909.479736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25971.458000, 27407.804000, 1157.216033, 1157.216033, 0.000000, X, Y) && !ellipse(29727.830400, 15589.212000, 1792.440052, 1792.440052, 0.000000, X, Y)
[Tue Jun  5 09:05:42 2012] Writing fullrun_mos2_xmm0153951201_pi300-10000_pass1_cl_src18.gif
[Tue Jun  5 09:16:42 2012] Mean detx,y = (51.74, -2428.58) 
[Tue Jun  5 09:16:44 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jun  5 09:26:56 2012] Binned source spectrum to 10 counts/bin
[Tue Jun  5 09:26:57 2012] Setting source spectrum file to fullrun_mos2_xmm0153951201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Jun  5 09:26:57 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153951201_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Tue Jun  5 11:47:47 2012] Updating aperture counts using extracted products
[Tue Jun  5 11:47:47 2012] Error reading totcts from fullrun_mos2_xmm0153951201_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Tue Jun  5 11:47:49 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jun  5 11:47:49 2012] Using photon index=1.80, rate=0.127, arf fullrun_mos2_xmm0153951201_pi300-10000_pass1_cl_src18.arf
[Tue Jun  5 11:47:49 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun  5 11:47:49 2012] Updating source flux to 1e-12
[Tue Jun  5 11:52:53 2012] Flag c found in src. 18 procflags, skipping spectral fitting