[Wed Jun 19 05:26:49 2013] Detection parameters:
  Position = (357.3, 236.0) = 16 22 25.04 -15 51 27.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 60.5 +/- 11.3
  Background counts = 46.3
  Rate = 0.02 +/- 0.004

[Wed Jun 19 05:26:50 2013] Off-axis axis estimate = 6.22'
[Wed Jun 19 05:28:13 2013] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 05:28:13 2013] Initial guess for spatial extent in simple fitting = 9.54"
[Wed Jun 19 05:28:13 2013] source mask rpix=2.2, npix_max = 29, mask sum = 26, frac = 0.896
[Wed Jun 19 05:28:13 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 9.54"
[Wed Jun 19 05:28:15 2013] fullrun_pn_xmm0153951001_pi300-10000_cl_pass0_src33.ximg exists
[Wed Jun 19 05:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153951001_pi300-10000_cl_pass0_src33.csv
[Wed Jun 19 05:28:15 2013] fullrun_pn_xmm0153951001_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Jun 19 05:28:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153951001_pi300-10000_cl_pass0_src33.csv
[Wed Jun 19 05:28:15 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153951001_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153951001_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 05:28:17 2013] fullrun_pn_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Jun 19 05:28:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src33.csv
[Wed Jun 19 05:28:17 2013] fullrun_pn_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Jun 19 05:28:17 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src33.csv
[Wed Jun 19 05:28:17 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 05:28:46 2013] Source 33 is offset by -1.027494 and 3.425522 pixels which is larger than
2 X fitted extent = 1.099255 x 1.099255, not incorporating fit results
[Wed Jun 19 05:28:46 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 05:28:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 05:28:46 2013] Assessing source extent using major
[Wed Jun 19 05:28:46 2013] Source does appear to be extended
[Wed Jun 19 05:28:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 05:28:46 2013] Source is confused with source 35
[Wed Jun 19 05:30:01 2013] Using EEF radius (= 9.54 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 05:30:01 2013] Initial guess for spatial extent in simple fitting = 9.54"
[Wed Jun 19 05:30:01 2013] source mask rpix=2.2, npix_max = 29, mask sum = 26, frac = 0.896
[Wed Jun 19 05:30:01 2013] Giving source the simple spatial ID 31 for pass 1, mean size = 9.54"
[Wed Jun 19 05:30:02 2013] fullrun_pn_xmm0153951001_pi300-10000_cl_pass1_src31.ximg exists
[Wed Jun 19 05:30:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153951001_pi300-10000_cl_pass1_src31.csv
[Wed Jun 19 05:30:02 2013] fullrun_pn_xmm0153951001_pi300-10000_cl_pass1_src31_1.ximg exists
[Wed Jun 19 05:30:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153951001_pi300-10000_cl_pass1_src31.csv
[Wed Jun 19 05:30:02 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153951001_pi300-10000_cl_pass1_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153951001_pi300-10000_cl_pass1_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 05:30:03 2013] fullrun_pn_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Wed Jun 19 05:30:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src31.csv
[Wed Jun 19 05:30:03 2013] fullrun_pn_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Wed Jun 19 05:30:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src31.csv
[Wed Jun 19 05:30:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 05:30:32 2013] Spatial fit model total counts = 288.577000, observed total counts = 288.000000
[Wed Jun 19 05:30:32 2013] Offset between fit and detection position for source 33 = 3.814807 pixels
[Wed Jun 19 05:30:32 2013] Warning, changing simple spatial fit ID from 31 to 30
[Wed Jun 19 05:30:32 2013] 227.785700 total counts/ 134.713000 bgd. counts: snr = 8.018951
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 3.814807 pixels
  Position = (353.8, 234.6) = 16 22 26.10 -15 51 34.2
  Extent = 18.7 (18.6-37.3)", rotation angle = 0
  Source counts = 93.1 +/- 15.1
  Background counts = 134.7
  Rate = 0.1 +/- 0.02
[Wed Jun 19 05:30:32 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 05:30:32 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 05:30:32 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 05:30:32 2013] Source does appear to be extended
[Wed Jun 19 05:30:32 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 05:31:43 2013] XMMSAS src. selection expression = ellipse(30734.976000, 20358.246000, 1119.354032, 1119.354032, 0.000000, X, Y)
[Wed Jun 19 05:31:43 2013] Not overwriting source region fullrun_pn_xmm0153951001_pi300-10000_pass1_cl_src33_src.reg
[Wed Jun 19 05:31:43 2013] Extracting stamp from image fullrun_pn_xmm0153951001_pi300-10000_cl_sm2.00.img.gz, (290, 170) - (418, 299)
[Wed Jun 19 05:31:43 2013] XMMSAS bgd. selection expression = annulus(30734.976000, 20358.246000, 1865.590054, 3731.180107, X, Y) && !ellipse(31707.044281, 24389.443695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31974.480072, 23971.162415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34589.978638, 15766.006775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32290.301117, 23570.810547, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32837.700000, 22522.691800, 1569.464045, 1569.464045, 0.000000, X, Y) && !ellipse(29466.109283, 21966.193146, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34543.916000, 21269.667800, 789.648023, 789.648023, 0.000000, X, Y) && !ellipse(34756.936200, 21060.182000, 394.824011, 394.824011, 0.000000, X, Y) && !ellipse(29769.768000, 21336.220000, 587.948817, 587.948817, 0.000000, X, Y) && !ellipse(35682.410000, 20493.500000, 1735.336050, 1735.336050, 0.000000, X, Y) && !ellipse(30381.486389, 20579.302750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30274.695200, 19856.959600, 1528.576044, 1528.576044, 0.000000, X, Y) && !ellipse(32286.998260, 19049.715149, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32733.475952, 18636.195663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30998.228455, 18408.356979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34047.680939, 17661.612732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33391.076263, 18041.178375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34427.904000, 17265.378000, 1881.048054, 1881.048054, 0.000000, X, Y) && !ellipse(34718.990000, 16944.096000, 1831.384053, 1831.384053, 0.000000, X, Y) && !ellipse(35734.834000, 16219.340000, 3109.936089, 388.742411, 28.815000, X, Y) && !ellipse(32947.787262, 16750.100021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36000.451600, 16055.513000, 1863.696054, 322.942409, 28.664000, X, Y) && !ellipse(33822.797302, 16316.286819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36076.443600, 16014.892760, 1979.024057, 269.707208, 207.133000, X, Y)
[Wed Jun 19 05:31:43 2013] Writing fullrun_pn_xmm0153951001_pi300-10000_pass1_cl_src33.gif
[Wed Jun 19 05:31:45 2013] ../../xmm0153951001/products/events/fullrun_pn_xmm0153951001_pi300-10000_pass1_cl_src33_src.evt and ../../xmm0153951001/products/events/fullrun_pn_xmm0153951001_pi300-10000_pass1_cl_src33_bgd.evt exist, delete to re-create
[Wed Jun 19 05:31:45 2013] Mean detx,y = (2368.98, 7892.46) 
[Wed Jun 19 05:31:45 2013] ../../xmm0153951001/products/images/fullrun_pn_xmm0153951001_pi300-10000_pass1_cl_src33_src.img and ../../xmm0153951001/products/images/fullrun_pn_xmm0153951001_pi300-10000_pass1_cl_src33_bgd.img exist, delete to re-create
[Wed Jun 19 05:31:45 2013] ../../xmm0153951001/products/spectra/fullrun_pn_xmm0153951001_pi300-10000_pass1_cl_src33_src.pi and ../../xmm0153951001/products/spectra/fullrun_pn_xmm0153951001_pi300-10000_pass1_cl_src33_bgd.pi exist, delete to re-create
[Wed Jun 19 05:31:45 2013] Setting source spectrum file to fullrun_pn_xmm0153951001_pi300-10000_pass1_cl_src33_src.pi.gz
[Wed Jun 19 05:31:45 2013] Setting bgd. spectrum file to fullrun_pn_xmm0153951001_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Wed Jun 19 05:31:45 2013] ../../xmm0153951001/products/lightcurves/fullrun_pn_xmm0153951001_pi300-10000_pass1_cl_src33_src.lc and ../../xmm0153951001/products/lightcurves/fullrun_pn_xmm0153951001_pi300-10000_pass1_cl_src33_bgd.lc exist, delete to re-create
[Wed Jun 19 05:32:00 2013] Not generating rmf since there are only 93 counts
[Wed Jun 19 05:32:00 2013] rmf not generated due to insufficient counts