[Wed Jun 19 05:27:00 2013] Detection parameters:
  Position = (353.3, 354.0) = 16 22 26.26 -15 42 54.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 4038.3 +/- 80.7
  Background counts = 123.6
  Rate = 0.4 +/- 0.007

[Wed Jun 19 05:27:10 2013] Off-axis axis estimate = 5.66'
[Wed Jun 19 05:28:22 2013] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 05:28:22 2013] Initial guess for spatial extent in simple fitting = 9.26"
[Wed Jun 19 05:28:22 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.085
[Wed Jun 19 05:28:22 2013] Giving source the simple spatial ID 43 for pass 0, mean size = 9.26"
[Wed Jun 19 05:28:24 2013] fullrun_mos2_xmm0153951001_pi300-10000_cl_pass0_src43.ximg exists
[Wed Jun 19 05:28:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153951001_pi300-10000_cl_pass0_src43.csv
[Wed Jun 19 05:28:24 2013] fullrun_mos2_xmm0153951001_pi300-10000_cl_pass0_src43_1.ximg exists
[Wed Jun 19 05:28:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153951001_pi300-10000_cl_pass0_src43.csv
[Wed Jun 19 05:28:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153951001_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153951001_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 05:28:26 2013] fullrun_mos2_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Wed Jun 19 05:28:26 2013] fullrun_mos2_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Wed Jun 19 05:28:26 2013] Fit fullrun_mos2_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Wed Jun 19 05:29:24 2013] Source 101 is offset by -9.371288 and -0.268024 pixels which is larger than
2 X fitted extent = 8.715954 x 8.715954, not incorporating fit results
[Wed Jun 19 05:29:25 2013] Spatial fit model total counts = 4619.270000, observed total counts = 4638.000000
[Wed Jun 19 05:29:25 2013] Offset between fit and detection position for source 101 = 2.078117 pixels
[Wed Jun 19 05:29:25 2013] 2961.612000 total counts/ 865.562000 bgd. counts: snr = 71.244698
Spatial fit parameters:
  Offset between fit and detection position for source 101 = 2.078117 pixels
  Position = (353.6, 356.1) = 16 22 26.18 -15 42 45.6
  Extent = 9.7 (9.3-10.2)", rotation angle = 0
  Source counts = 2096.1 +/- 54.4
  Background counts = 865.6
  Rate = 0.4 +/- 0.01
[Wed Jun 19 05:29:25 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 05:29:25 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 05:29:25 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 05:29:25 2013] Source does appear to be extended
[Wed Jun 19 05:29:25 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 05:29:25 2013] Source is confused with source 94
[Wed Jun 19 05:30:08 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Jun 19 05:30:08 2013] Initial guess for spatial extent in simple fitting = 9.70"
[Wed Jun 19 05:30:08 2013] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.006
[Wed Jun 19 05:30:08 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 9.70"
[Wed Jun 19 05:30:10 2013] fullrun_mos2_xmm0153951001_pi300-10000_cl_pass1_src41.ximg exists
[Wed Jun 19 05:30:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153951001_pi300-10000_cl_pass1_src41.csv
[Wed Jun 19 05:30:10 2013] fullrun_mos2_xmm0153951001_pi300-10000_cl_pass1_src41_1.ximg exists
[Wed Jun 19 05:30:10 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153951001_pi300-10000_cl_pass1_src41.csv
[Wed Jun 19 05:30:10 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153951001_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153951001_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 05:30:12 2013] fullrun_mos2_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Wed Jun 19 05:30:12 2013] fullrun_mos2_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Wed Jun 19 05:30:12 2013] Fit fullrun_mos2_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src41 appears to have run properly
[Wed Jun 19 05:31:08 2013] Warning, spatial fit 41 centroid is now closest to src. 94
[Wed Jun 19 05:31:09 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 05:31:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 05:31:09 2013] Assessing source extent using major axis lower bound
[Wed Jun 19 05:31:09 2013] Source does appear to be extended
[Wed Jun 19 05:31:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 05:32:37 2013] Counts = 2096.050000, rescaling region sizes by 2.000000
[Wed Jun 19 05:32:37 2013] XMMSAS src. selection expression = ellipse(30714.184600, 30930.383200, 1164.074433, 1164.074433, 0.000000, X, Y)
[Wed Jun 19 05:32:37 2013] Not overwriting source region fullrun_mos2_xmm0153951001_pi300-10000_pass1_cl_src101_src.reg
[Wed Jun 19 05:32:37 2013] Extracting stamp from image fullrun_mos2_xmm0153951001_pi300-10000_cl_sm2.00.img.gz, (287, 289) - (420, 423)
[Wed Jun 19 05:32:38 2013] XMMSAS bgd. selection expression = annulus(30714.184600, 30930.383200, 3880.248112, 7760.496223, X, Y) && !ellipse(36684.746000, 19031.122000, 4147.128119, 4147.128119, 0.000000, X, Y) && !ellipse(31039.484955, 34312.520111, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33697.777283, 24922.337280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33280.820600, 25898.376000, 1030.944030, 1030.944030, 0.000000, X, Y) && !ellipse(32470.792664, 30226.560120, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32475.494720, 29619.569977, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39432.155160, 34958.513000, 1293.168037, 164.229605, 112.304000, X, Y) && !ellipse(32244.504517, 23269.483307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33332.420649, 25753.698312, 1525.864044, 275.782316, 68.195112, X, Y) && !ellipse(30710.614441, 31446.360229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31836.471000, 24292.056000, 1436.536041, 225.833606, 71.774600, X, Y) && !ellipse(32468.225250, 30661.472504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30774.689000, 32805.657000, 1587.840046, 300.820009, 90.000000, X, Y) && !ellipse(34072.983700, 25549.789800, 538.361615, 538.361615, 0.000000, X, Y) && !ellipse(31131.364000, 39503.398000, 6985.728201, 6985.728201, 0.000000, X, Y) && !ellipse(34692.622000, 24401.668000, 1016.752029, 1016.752029, 0.000000, X, Y) && !ellipse(32426.743073, 22919.284943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36705.874000, 25678.194000, 1183.832034, 1183.832034, 0.000000, X, Y) && !ellipse(36941.114662, 21372.558157, 1848.400053, 1135.640222, 48.803097, X, Y) && !ellipse(29368.977692, 32995.309631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29537.102112, 33968.908875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35620.360992, 31617.614929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30691.526400, 38732.060200, 1949.464056, 512.470415, 126.643000, X, Y) && !ellipse(32090.408600, 23653.878000, 696.939220, 696.939220, 0.000000, X, Y) && !ellipse(37453.613586, 24484.507019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35720.304800, 32239.458000, 1099.032032, 1099.032032, 0.000000, X, Y) && !ellipse(31720.229156, 22667.720917, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39076.221466, 33879.609619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30761.176040, 29719.916600, 775.447222, 775.447222, 0.000000, X, Y) && !ellipse(33379.500336, 37890.368561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31682.060600, 24634.482000, 985.184028, 985.184028, 0.000000, X, Y) && !ellipse(37112.762000, 24982.502000, 1323.968038, 1323.968038, 0.000000, X, Y) && !ellipse(39232.762000, 19861.030000, 9628.704277, 9628.704277, 0.000000, X, Y) && !ellipse(33748.074158, 34919.032349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29247.046400, 31970.385800, 860.808025, 860.808025, 0.000000, X, Y) && !ellipse(31378.746000, 23161.908000, 575.777617, 575.777617, 0.000000, X, Y) && !ellipse(30409.887238, 38317.199036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33176.876300, 29227.812000, 379.484811, 285.036808, 321.712800, X, Y) && !ellipse(29994.566000, 37657.040200, 636.176018, 636.176018, 0.000000, X, Y) && !ellipse(35556.202209, 23170.697632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30831.379000, 29162.363600, 778.993622, 778.993622, 0.000000, X, Y) && !ellipse(34681.890442, 36837.054718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30993.483917, 23791.557648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38687.878296, 32316.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33998.424835, 38753.423004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33193.234100, 29600.007721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39049.389740, 22664.112732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36053.677704, 39002.093048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39149.449829, 27690.346039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30646.324560, 24448.672200, 1361.392039, 170.173605, 242.889000, X, Y) && !ellipse(35024.730320, 37414.033000, 2208.184064, 276.022408, 121.893000, X, Y) && !ellipse(29182.490372, 30124.964400, 361.842410, 361.842410, 0.000000, X, Y) && !ellipse(36345.704376, 26980.531921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35673.474854, 38412.663269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38607.468079, 31618.161865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31559.459167, 34150.600494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30423.680115, 24921.078796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38865.677643, 33272.401764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38607.380463, 30153.602570, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35801.351685, 30836.683197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37562.225525, 26488.634644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27440.837006, 31179.150116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34406.186890, 36327.573181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33297.852875, 30044.998596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31463.512600, 25330.048000, 1312.688038, 1312.688038, 0.000000, X, Y) && !ellipse(31990.380000, 40078.154000, 1446.096042, 1446.096042, 0.000000, X, Y) && !ellipse(33723.945251, 38405.420349, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35335.253326, 37798.273560, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33050.706818, 32490.224823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38857.125793, 24398.616821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36605.371552, 30750.522186, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34030.216156, 35352.909271, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38242.340485, 25264.822784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32080.030762, 35969.858429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36795.973450, 35441.345642, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36084.300812, 33273.628387, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37819.481934, 26047.419220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33291.361328, 33882.721313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36511.356964, 34752.450500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31821.473389, 34945.954346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29211.553040, 29793.848755, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33556.866913, 32230.058502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37345.474243, 26920.576050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39158.365417, 31356.333496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36964.188141, 33703.899780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35497.419861, 29675.893768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27475.708160, 30227.399109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27566.932312, 29356.716766, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36629.471252, 29954.326691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34589.310000, 39334.408000, 1919.688055, 1919.688055, 0.000000, X, Y) && !ellipse(29776.073334, 23097.825043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33385.455566, 31010.717712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32947.598755, 31476.810760, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36781.370789, 32927.362122, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27688.880463, 28664.606384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35960.701233, 37011.869812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33713.423370, 32927.590454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39214.429016, 30479.021545, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36604.856476, 31270.549500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36651.433655, 32054.807983, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37598.262238, 35444.725494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37296.557983, 34753.114258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33121.325287, 32924.069885, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35866.506104, 29759.362579, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28890.161743, 24753.084473, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29265.771393, 23968.895020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32259.011597, 36400.549316, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30673.130737, 37364.038208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37905.608429, 35965.068756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30149.848358, 36144.458466, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36730.967712, 38143.175140, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37249.869293, 38829.808197, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34734.738800, 35609.812561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35178.569427, 36493.095673, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34404.017731, 34927.584198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33191.479126, 33445.764557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29885.351685, 35460.345032, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38623.000000, 30884.372833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27503.368256, 29791.371613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36444.965302, 37794.930878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34089.813599, 23177.688324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30470.984772, 36928.730225, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36715.472961, 32579.290436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35442.638641, 36925.119385, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31955.793976, 35523.542694, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29599.975861, 31189.103821, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35093.640350, 38499.803986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33454.452000, 38320.374000, 1791.808052, 1791.808052, 0.000000, X, Y) && !ellipse(29573.329987, 36920.746552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35528.560699, 39178.604706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38330.723755, 36849.291748, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33923.239716, 23789.340698, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29765.944397, 29789.858246, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29203.633087, 36046.734802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30225.738000, 23218.354000, 481.418414, 481.418414, 0.000000, X, Y) && !ellipse(33605.010559, 38912.714142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29700.221802, 30226.536224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32309.512909, 31867.992157, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29633.065491, 32184.463684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32074.072876, 32390.050568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31639.736633, 33182.499817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33435.688721, 23097.060394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33864.961823, 29420.320648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29357.709747, 37713.455994, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32660.675049, 24827.348297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29452.159760, 38061.530334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28881.909912, 35017.268433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28852.659454, 37716.445557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28399.769867, 36835.305054, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28607.658661, 37359.466248, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 05:32:38 2013] Writing fullrun_mos2_xmm0153951001_pi300-10000_pass1_cl_src101.gif