[Wed Jun 19 05:26:51 2013] Detection parameters:
  Position = (470.2, 402.0) = 16 21 51.06 -15 39 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 7384.9 +/- 104.5
  Background counts = 80.2
  Rate = 0.4 +/- 0.006

[Wed Jun 19 05:26:54 2013] Off-axis axis estimate = 14.54'
[Wed Jun 19 05:28:18 2013] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 05:28:18 2013] Initial guess for spatial extent in simple fitting = 13.70"
[Wed Jun 19 05:28:18 2013] source mask rpix=3.1, npix_max = 53, mask sum = 55, frac = 1.032
[Wed Jun 19 05:28:18 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 13.70"
[Wed Jun 19 05:28:18 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_src2.ximg exists
[Wed Jun 19 05:28:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_src2.csv
[Wed Jun 19 05:28:18 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Jun 19 05:28:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_src2.csv
[Wed Jun 19 05:28:18 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 05:28:20 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Jun 19 05:28:20 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Jun 19 05:28:20 2013] Fit fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Wed Jun 19 05:29:00 2013] Warning, spatial fit 2 centroid is now closest to src. 15
[Wed Jun 19 05:29:00 2013] Source 6 is offset by -6.460375 and 3.319807 pixels which is larger than
2 X fitted extent = 1.522772 x 1.522772, not incorporating fit results
[Wed Jun 19 05:29:00 2013] Source 6 is offset by 0.258476 and -3.645204 pixels which is larger than
2 X fitted extent = 1.544589 x 1.544589, not incorporating fit results
[Wed Jun 19 05:29:00 2013] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 6 at 16.696654 pixels away
[Wed Jun 19 05:29:00 2013] Spatial fit model total counts = -1353.250000, observed total counts = 1738.000000
[Wed Jun 19 05:29:00 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 05:29:01 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 05:29:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 05:29:01 2013] Assessing source extent using major
[Wed Jun 19 05:29:01 2013] Source does appear to be extended
[Wed Jun 19 05:29:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 05:30:04 2013] Using EEF radius (= 13.70 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 05:30:04 2013] Initial guess for spatial extent in simple fitting = 13.70"
[Wed Jun 19 05:30:04 2013] source mask rpix=3.1, npix_max = 53, mask sum = 55, frac = 1.032
[Wed Jun 19 05:30:04 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 13.70"
[Wed Jun 19 05:30:05 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_src2.ximg exists
[Wed Jun 19 05:30:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_src2.csv
[Wed Jun 19 05:30:05 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_src2_1.ximg exists
[Wed Jun 19 05:30:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_src2.csv
[Wed Jun 19 05:30:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 05:30:06 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Wed Jun 19 05:30:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 19 05:30:06 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Wed Jun 19 05:30:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Wed Jun 19 05:30:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 05:30:46 2013] Warning, spatial fit 2 centroid is now closest to src. 2
[Wed Jun 19 05:30:46 2013] Source 6 is offset by -6.460375 and 3.319807 pixels which is larger than
2 X fitted extent = 1.522772 x 1.522772, not incorporating fit results
[Wed Jun 19 05:30:46 2013] Source 6 is offset by 0.278039 and -2.809181 pixels which is larger than
2 X fitted extent = 1.544589 x 1.544589, not incorporating fit results
[Wed Jun 19 05:30:46 2013] Spatial fit model total counts = 4767.200000, observed total counts = 3352.000000
[Wed Jun 19 05:30:46 2013] Poor agreement between spatial fit and data for source 6
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Jun 19 05:30:46 2013] Source 6 is offset by -1.677984 and -1.644308 pixels which is larger than
2 X fitted extent = 1.629444 x 1.629444, not incorporating fit results
[Wed Jun 19 05:30:46 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 05:30:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 05:30:46 2013] Assessing source extent using major
[Wed Jun 19 05:30:46 2013] Source does appear to be extended
[Wed Jun 19 05:30:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 05:32:03 2013] Counts = 7384.916504, rescaling region sizes by 2.000000
[Wed Jun 19 05:32:03 2013] XMMSAS src. selection expression = ellipse(40860.799408, 34925.675232, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jun 19 05:32:03 2013] Not overwriting source region fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src6_src.reg
[Wed Jun 19 05:32:03 2013] Extracting stamp from image fullrun_mos1_xmm0153951001_pi300-10000_cl_sm2.00.img.gz, (395, 327) - (545, 477)
[Wed Jun 19 05:32:03 2013] XMMSAS bgd. selection expression = annulus(40860.799408, 34925.675232, 4350.000000, 8700.000000, X, Y) && !ellipse(42513.012000, 25914.392000, 842.104024, 842.104024, 0.000000, X, Y) && !ellipse(42198.798000, 26247.480000, 1550.968045, 1550.968045, 0.000000, X, Y) && !ellipse(40409.051483, 33519.077881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40588.396057, 34143.551392, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41189.831879, 35611.862244, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41441.982666, 36146.401947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39752.606110, 36822.614014, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40955.740601, 28047.325348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31533.372000, 40716.280000, 2108.984061, 263.623208, 128.078000, X, Y) && !ellipse(31867.543000, 41137.340600, 481.719214, 481.719214, 0.000000, X, Y) && !ellipse(39761.858887, 31949.727234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39646.900000, 38428.900000, 300.752809, 300.752809, 0.000000, X, Y) && !ellipse(39351.097000, 38038.099400, 284.400008, 284.400008, 0.000000, X, Y)
[Wed Jun 19 05:32:03 2013] Writing fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src6.gif
[Wed Jun 19 05:32:06 2013] ../../xmm0153951001/products/events/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src6_src.evt and ../../xmm0153951001/products/events/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src6_bgd.evt exist, delete to re-create
[Wed Jun 19 05:32:06 2013] Mean detx,y = (4428.42, 14993.16) 
[Wed Jun 19 05:32:06 2013] ../../xmm0153951001/products/images/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src6_src.img and ../../xmm0153951001/products/images/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src6_bgd.img exist, delete to re-create
[Wed Jun 19 05:32:06 2013] ../../xmm0153951001/products/spectra/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src6_src.pi and ../../xmm0153951001/products/spectra/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src6_bgd.pi exist, delete to re-create
[Wed Jun 19 05:32:06 2013] Setting source spectrum file to fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src6_src.pi.gz
[Wed Jun 19 05:32:06 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Wed Jun 19 05:32:06 2013] ../../xmm0153951001/products/lightcurves/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src6_src.lc and ../../xmm0153951001/products/lightcurves/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src6_bgd.lc exist, delete to re-create
[Wed Jun 19 05:32:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 05:32:18 2013] rmf not generated due to insufficient counts