[Wed Jun 19 05:26:52 2013] Detection parameters:
  Position = (407.9, 187.1) = 16 22 9.78 -15 55 1.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1837.0 +/- 55.1
  Background counts = 82.5
  Rate = 0.1 +/- 0.003

[Wed Jun 19 05:26:54 2013] Off-axis axis estimate = 11.32'
[Wed Jun 19 05:28:18 2013] Using EEF radius (= 12.09 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 05:28:18 2013] Initial guess for spatial extent in simple fitting = 12.09"
[Wed Jun 19 05:28:18 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.837
[Wed Jun 19 05:28:18 2013] Giving source the simple spatial ID 21 for pass 0, mean size = 12.09"
[Wed Jun 19 05:28:19 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_src21.ximg exists
[Wed Jun 19 05:28:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_src21.csv
[Wed Jun 19 05:28:19 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed Jun 19 05:28:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_src21.csv
[Wed Jun 19 05:28:19 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 05:28:21 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed Jun 19 05:28:21 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Jun 19 05:28:21 2013] Fit fullrun_mos1_xmm0153951001_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Wed Jun 19 05:29:00 2013] Warning, spatial fit 21 centroid is now closest to src. 19
[Wed Jun 19 05:29:01 2013] Warning: source 26 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 11.796283 pixels away
[Wed Jun 19 05:29:01 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 05:29:01 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 05:29:01 2013] Assessing source extent using major
[Wed Jun 19 05:29:01 2013] Source does appear to be extended
[Wed Jun 19 05:29:01 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 05:29:01 2013] Source is confused with source 22
[Wed Jun 19 05:30:04 2013] Using EEF radius (= 12.09 ")to estimate initial spatial extent for simple fitting
[Wed Jun 19 05:30:04 2013] Initial guess for spatial extent in simple fitting = 12.09"
[Wed Jun 19 05:30:04 2013] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.837
[Wed Jun 19 05:30:04 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 12.09"
[Wed Jun 19 05:30:05 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_src19.ximg exists
[Wed Jun 19 05:30:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_src19.csv
[Wed Jun 19 05:30:05 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_src19_1.ximg exists
[Wed Jun 19 05:30:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_src19.csv
[Wed Jun 19 05:30:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Jun 19 05:30:07 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Wed Jun 19 05:30:07 2013] fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Wed Jun 19 05:30:07 2013] Fit fullrun_mos1_xmm0153951001_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Wed Jun 19 05:30:46 2013] Warning, spatial fit 19 centroid is now closest to src. 22
[Wed Jun 19 05:30:46 2013] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 14.306549 pixels away
[Wed Jun 19 05:30:46 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 21 at 20.262083 pixels away
[Wed Jun 19 05:30:46 2013] Vigneting correction estimate = 1.000000
[Wed Jun 19 05:30:46 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Jun 19 05:30:46 2013] Assessing source extent using major
[Wed Jun 19 05:30:46 2013] Source does appear to be extended
[Wed Jun 19 05:30:46 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Jun 19 05:32:04 2013] Counts = 1837.045532, rescaling region sizes by 2.000000
[Wed Jun 19 05:32:04 2013] XMMSAS src. selection expression = ellipse(35442.256317, 16230.119171, 1305.000000, 1305.000000, 0.000000, X, Y)
[Wed Jun 19 05:32:04 2013] Not overwriting source region fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src21_src.reg
[Wed Jun 19 05:32:04 2013] Extracting stamp from image fullrun_mos1_xmm0153951001_pi300-10000_cl_sm2.00.img.gz, (333, 112) - (483, 262)
[Wed Jun 19 05:32:04 2013] XMMSAS bgd. selection expression = annulus(35442.256317, 16230.119171, 4350.000000, 8700.000000, X, Y) && !ellipse(43339.410000, 25124.818000, 672.716819, 672.716819, 0.000000, X, Y) && !ellipse(42198.798000, 26247.480000, 1550.968045, 1550.968045, 0.000000, X, Y) && !ellipse(36326.610000, 17338.740000, 249.436807, 249.436807, 0.000000, X, Y) && !ellipse(35144.508000, 18349.920000, 1882.136054, 1882.136054, 0.000000, X, Y) && !ellipse(35813.766602, 17794.333664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37903.553436, 16688.016144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32353.964000, 17665.920000, 1507.080043, 1507.080043, 0.000000, X, Y) && !ellipse(37361.173431, 17007.221024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32722.716000, 17449.411400, 1228.848035, 1228.848035, 0.000000, X, Y) && !ellipse(35292.049000, 15966.888000, 1240.360036, 1240.360036, 0.000000, X, Y) && !ellipse(31283.102000, 18409.778000, 1656.856048, 347.417610, 30.845500, X, Y) && !ellipse(30778.102000, 18652.136200, 1626.016047, 1626.016047, 0.000000, X, Y) && !ellipse(29753.982800, 23323.335000, 682.295220, 682.295220, 0.000000, X, Y) && !ellipse(29588.468800, 23537.671800, 1333.160038, 1333.160038, 0.000000, X, Y) && !ellipse(43278.864685, 23910.582611, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35531.300690, 13535.127701, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29286.258725, 24281.057623, 2495.312072, 384.777792, 65.665160, X, Y) && !ellipse(31021.252000, 17064.817600, 1729.464050, 1729.464050, 0.000000, X, Y) && !ellipse(30985.293152, 17971.132065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30095.074000, 17483.844000, 1574.440045, 1574.440045, 0.000000, X, Y) && !ellipse(34052.301600, 13503.101200, 1187.544034, 1187.544034, 0.000000, X, Y) && !ellipse(31778.464569, 17188.692276, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30099.357200, 17975.278000, 1627.312047, 1627.312047, 0.000000, X, Y) && !ellipse(28432.280600, 22873.392000, 880.216025, 880.216025, 0.000000, X, Y) && !ellipse(34482.420746, 12834.886292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33663.994690, 13184.192566, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Jun 19 05:32:04 2013] Writing fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src21.gif
[Wed Jun 19 05:32:06 2013] ../../xmm0153951001/products/events/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src21_src.evt and ../../xmm0153951001/products/events/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src21_bgd.evt exist, delete to re-create
[Wed Jun 19 05:32:06 2013] Mean detx,y = (-12832.33, 5730.89) 
[Wed Jun 19 05:32:06 2013] ../../xmm0153951001/products/images/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src21_src.img and ../../xmm0153951001/products/images/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src21_bgd.img exist, delete to re-create
[Wed Jun 19 05:32:06 2013] ../../xmm0153951001/products/spectra/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src21_src.pi and ../../xmm0153951001/products/spectra/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src21_bgd.pi exist, delete to re-create
[Wed Jun 19 05:32:06 2013] Setting source spectrum file to fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src21_src.pi.gz
[Wed Jun 19 05:32:06 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Wed Jun 19 05:32:06 2013] ../../xmm0153951001/products/lightcurves/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src21_src.lc and ../../xmm0153951001/products/lightcurves/fullrun_mos1_xmm0153951001_pi300-10000_pass1_cl_src21_bgd.lc exist, delete to re-create
[Wed Jun 19 05:32:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Jun 19 05:32:21 2013] rmf not generated due to insufficient counts