[Wed May  1 00:46:11 2013] Detection parameters:
  Position = (420.4, 120.2) = 16 21 59.46 -15 56 48.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 765.9 +/- 34.5
  Background counts = 29.5
  Rate = 0.2 +/- 0.008

[Wed May  1 00:46:24 2013] Off-axis axis estimate = 15.66'
[Wed May  1 00:50:53 2013] Using EEF radius (= 14.26 ")to estimate initial spatial extent for simple fitting
[Wed May  1 00:50:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed May  1 00:50:53 2013] Initial guess for spatial extent in simple fitting = 14.26"
[Wed May  1 00:50:53 2013] source mask rpix=3.3, npix_max = 57, mask sum = 54, frac = 0.946
[Wed May  1 00:50:53 2013] Giving source the simple spatial ID 36 for pass 0, mean size = 14.26"
[Wed May  1 12:30:03 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src36.ximg exists
[Wed May  1 12:30:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src36.csv
[Wed May  1 12:30:03 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src36_1.ximg exists
[Wed May  1 12:30:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src36.csv
[Wed May  1 12:30:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 12:30:05 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src36.ximg exists
[Wed May  1 12:30:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src36.csv
[Wed May  1 12:30:05 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src36_1.ximg exists
[Wed May  1 12:30:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src36.csv
[Wed May  1 12:30:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:58:59 2013] Warning, spatial fit 36 centroid is now closest to src. 484
[Thu May  2 06:59:00 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:00 2013] Assessing source extent using major
[Thu May  2 06:59:00 2013] Source does appear to be extended
[Thu May  2 06:59:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 06:59:00 2013] Source is confused with source 103
[Thu May  2 06:59:00 2013] Source is confused with source 177
[Thu May  2 07:00:47 2013] Using EEF radius (= 14.26 ")to estimate initial spatial extent for simple fitting
[Thu May  2 07:00:47 2013] Initial guess for spatial extent in simple fitting = 14.26"
[Thu May  2 07:00:47 2013] source mask rpix=3.3, npix_max = 57, mask sum = 54, frac = 0.946
[Thu May  2 07:00:47 2013] Giving source the simple spatial ID 36 for pass 1, mean size = 14.26"
[Thu May  2 17:48:56 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src36.ximg exists
[Thu May  2 17:48:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src36.csv
[Thu May  2 17:48:56 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src36_1.ximg exists
[Thu May  2 17:48:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src36.csv
[Thu May  2 17:48:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 17:48:58 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src36.ximg exists
[Thu May  2 17:48:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src36.csv
[Thu May  2 17:48:58 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src36_1.ximg exists
[Thu May  2 17:48:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src36.csv
[Thu May  2 17:48:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src36_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src36.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:14 2013] Warning, spatial fit 36 centroid is now closest to src. 484
[Fri May  3 13:00:16 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:16 2013] Assessing source extent using major
[Fri May  3 13:00:16 2013] Source does appear to be extended
[Fri May  3 13:00:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 13:02:14 2013] XMMSAS src. selection expression = ellipse(36530.635132, 10409.536942, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 13:02:14 2013] Writing source region out to fullrun_pn_xmm0153950901_pi300-10000_pass1_cl_src36_src.reg
[Fri May  3 13:02:14 2013] Extracting stamp from image fullrun_pn_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (383, 83) - (458, 158)
[Fri May  3 13:02:14 2013] XMMSAS bgd. selection expression = annulus(36530.635132, 10409.536942, 1087.500000, 2175.000000, X, Y) && !ellipse(35268.412964, 10746.004158, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37092.824310, 10739.652664, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36274.538971, 10914.056892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36399.625366, 13441.573761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34399.859955, 13428.731384, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36886.786072, 13184.136810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37529.141205, 13000.698181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34831.822601, 13241.044708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36141.248535, 12656.198837, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39008.802307, 12555.140457, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38052.874939, 12826.453918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36663.065338, 12490.690948, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37249.991425, 12290.128708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37711.148773, 12130.852173, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36051.065155, 12052.478363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38027.718536, 11379.314270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36808.372437, 11779.674103, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38903.357819, 11932.516174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38357.951080, 11952.978485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37334.763855, 11606.071030, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34834.825439, 11426.038803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33731.440399, 11367.723740, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34121.570404, 13009.700058, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34769.381622, 12675.685425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34447.000000, 9954.306946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34257.638000, 10233.173965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33762.775055, 10730.001633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34238.410278, 12023.606247, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35694.314178, 9712.628258, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 13:02:14 2013] Writing fullrun_pn_xmm0153950901_pi300-10000_pass1_cl_src36.gif