[Wed May  1 00:46:11 2013] Detection parameters:
  Position = (347.5, 414.7) = 16 22 21.48 -15 35 25.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 721.6 +/- 45.0
  Background counts = 68.7
  Rate = 0.2 +/- 0.01

[Wed May  1 00:46:24 2013] Off-axis axis estimate = 9.15'
[Wed May  1 00:50:53 2013] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Wed May  1 00:50:53 2013] Initial guess for spatial extent in simple fitting = 11.00"
[Wed May  1 00:50:53 2013] source mask rpix=2.5, npix_max = 36, mask sum = 38, frac = 1.035
[Wed May  1 00:50:53 2013] Giving source the simple spatial ID 35 for pass 0, mean size = 11.00"
[Wed May  1 12:30:03 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src35.ximg exists
[Wed May  1 12:30:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src35.csv
[Wed May  1 12:30:03 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src35_1.ximg exists
[Wed May  1 12:30:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src35.csv
[Wed May  1 12:30:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 12:30:05 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Wed May  1 12:30:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src35.csv
[Wed May  1 12:30:05 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Wed May  1 12:30:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src35.csv
[Wed May  1 12:30:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:58:59 2013] Source 35 is offset by 1.977741 and 4.354533 pixels which is larger than
2 X fitted extent = 1.964193 x 1.964193, not incorporating fit results
[Thu May  2 06:58:59 2013] Warning, spatial fit 35 centroid is now closest to src. 32
[Thu May  2 06:59:00 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:00 2013] Assessing source extent using major
[Thu May  2 06:59:00 2013] Source does appear to be extended
[Thu May  2 06:59:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 06:59:00 2013] Source is confused with source 32
[Thu May  2 06:59:00 2013] Source is confused with source 40
[Thu May  2 06:59:00 2013] Source is confused with source 47
[Thu May  2 07:00:47 2013] Using EEF radius (= 11.00 ")to estimate initial spatial extent for simple fitting
[Thu May  2 07:00:47 2013] Initial guess for spatial extent in simple fitting = 11.00"
[Thu May  2 07:00:47 2013] source mask rpix=2.5, npix_max = 36, mask sum = 38, frac = 1.035
[Thu May  2 07:00:47 2013] Giving source the simple spatial ID 35 for pass 1, mean size = 11.00"
[Thu May  2 17:48:56 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src35.ximg exists
[Thu May  2 17:48:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src35.csv
[Thu May  2 17:48:56 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu May  2 17:48:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src35.csv
[Thu May  2 17:48:56 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 17:48:57 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu May  2 17:48:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src35.csv
[Thu May  2 17:48:58 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu May  2 17:48:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src35.csv
[Thu May  2 17:48:58 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src35_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:14 2013] Warning, spatial fit 35 centroid is now closest to src. 28
[Fri May  3 13:00:16 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:16 2013] Assessing source extent using major
[Fri May  3 13:00:16 2013] Source does appear to be extended
[Fri May  3 13:00:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 13:02:14 2013] XMMSAS src. selection expression = ellipse(30185.497437, 36026.904388, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 13:02:14 2013] Writing source region out to fullrun_pn_xmm0153950901_pi300-10000_pass1_cl_src35_src.reg
[Fri May  3 13:02:14 2013] Extracting stamp from image fullrun_pn_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (310, 377) - (385, 452)
[Fri May  3 13:02:14 2013] XMMSAS bgd. selection expression = annulus(30185.497437, 36026.904388, 1087.500000, 2175.000000, X, Y) && !ellipse(30657.014709, 38403.052063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31763.599040, 37975.966400, 2176.656063, 272.082408, 313.768000, X, Y) && !ellipse(29466.414612, 37699.057770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28924.623800, 39045.919200, 1704.792049, 759.043222, 327.761283, X, Y) && !ellipse(31342.691000, 37520.275200, 1876.064054, 234.508007, 310.759800, X, Y) && !ellipse(30652.060425, 37973.834717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29967.686798, 37092.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28634.612000, 36691.184200, 2009.312058, 251.164007, 305.699000, X, Y) && !ellipse(29644.290955, 36663.808746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29482.889069, 37279.483490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33515.481200, 36450.540400, 1898.248055, 237.281607, 313.451600, X, Y) && !ellipse(30774.454620, 36838.846863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28207.707703, 36056.000854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28498.744049, 36483.888031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29481.331800, 36440.876000, 1787.024051, 418.100012, 307.307600, X, Y) && !ellipse(33058.897800, 35941.552000, 2082.056060, 260.257607, 130.704800, X, Y) && !ellipse(28972.239340, 35681.402400, 2119.736061, 388.528011, 304.213000, X, Y) && !ellipse(28734.044600, 35306.271400, 1686.552049, 380.809611, 123.037600, X, Y) && !ellipse(27886.446503, 35529.678467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32655.819200, 35455.717400, 1807.040052, 225.880006, 128.161000, X, Y) && !ellipse(29730.226400, 35278.943000, 1702.608049, 212.826406, 120.977000, X, Y) && !ellipse(28538.400400, 34964.736200, 2043.320059, 387.297611, 300.369000, X, Y) && !ellipse(34086.988600, 35870.812800, 1874.744054, 408.071212, 310.033100, X, Y) && !ellipse(27607.920654, 35095.225403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32080.912600, 34668.469800, 1740.704050, 217.588006, 303.992500, X, Y) && !ellipse(33962.532000, 34654.330000, 1649.832047, 253.566407, 115.649300, X, Y) && !ellipse(28277.939400, 34483.192220, 1614.856046, 389.620011, 117.692400, X, Y) && !ellipse(33155.915400, 34568.972000, 2362.488068, 560.821616, 303.295500, X, Y) && !ellipse(27352.259918, 34662.829987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32902.383606, 33978.828064, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28011.686400, 33936.446200, 1940.760056, 370.568011, 115.580300, X, Y) && !ellipse(31778.445000, 34193.788720, 1906.336055, 238.292007, 121.760000, X, Y) && !ellipse(32683.366000, 33456.647000, 2484.736071, 310.592009, 115.683300, X, Y) && !ellipse(27730.309540, 33278.622498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33332.145600, 33513.493600, 1730.744050, 216.343206, 298.148700, X, Y) && !ellipse(32445.566800, 33388.090000, 1661.016048, 823.720024, 119.958800, X, Y) && !ellipse(32914.183760, 32657.657200, 1677.328048, 209.665606, 113.669800, X, Y) && !ellipse(26594.072600, 33100.486982, 1503.744043, 231.064007, 113.568600, X, Y) && !ellipse(33574.180000, 32130.092000, 1886.992054, 247.372807, 292.520800, X, Y) && !ellipse(31136.250153, 38830.209106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29470.394501, 34834.615692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29187.617950, 34314.285706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33559.852000, 34422.030000, 1617.384047, 459.943213, 90.000000, X, Y) && !ellipse(28843.555359, 33539.792419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31360.525787, 33478.570099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28070.193115, 37623.068176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.204000, 37071.190000, 1753.872050, 826.032024, 116.708000, X, Y) && !ellipse(26879.486000, 35625.682000, 1650.864048, 494.488014, 301.841700, X, Y) && !ellipse(27345.324982, 33886.175507, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 13:02:14 2013] Writing fullrun_pn_xmm0153950901_pi300-10000_pass1_cl_src35.gif