[Wed May  1 00:46:20 2013] Detection parameters:
  Position = (312.9, 416.1) = 16 22 31.90 -15 35 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 295.2 +/- 26.4
  Background counts = 68.0
  Rate = 0.07 +/- 0.006

[Wed May  1 00:46:24 2013] Off-axis axis estimate = 8.59'
[Wed May  1 00:50:53 2013] Using EEF radius (= 10.73 ")to estimate initial spatial extent for simple fitting
[Wed May  1 00:50:53 2013] Initial guess for spatial extent in simple fitting = 10.73"
[Wed May  1 00:50:53 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.023
[Wed May  1 00:50:53 2013] Giving source the simple spatial ID 315 for pass 0, mean size = 10.73"
[Thu May  2 06:58:59 2013] Spatial fit model total counts = 5073.280000, observed total counts = 4992.000000
[Thu May  2 06:58:59 2013] Offset between fit and detection position for source 317 = 4.435888 pixels
[Thu May  2 06:58:59 2013] Warning, changing simple spatial fit ID from 315 to 52
[Thu May  2 06:58:59 2013] 5189.651000 total counts/ 4864.700000 bgd. counts: snr = 4.658969
Spatial fit parameters:
  Offset between fit and detection position for source 317 = 4.435888 pixels
  Position = (310.8, 412.2) = 16 22 32.54 -15 35 36.5
  Extent = 18.3 (15.0-20.6)" x 6.0 (5.4-6.5)", rotation angle = 113 (107-117) degrees
  Source counts = 325.0 +/- 72.0
  Background counts = 4864.7
  Rate = 0.1 +/- 0.03
[Thu May  2 06:59:00 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:00 2013] Assessing source extent using major axis lower bound
[Thu May  2 06:59:00 2013] Source does appear to be extended
[Thu May  2 06:59:00 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.29
[Thu May  2 06:59:00 2013] Source is asymmetric
[Thu May  2 06:59:00 2013] Source is confused with source 52
[Thu May  2 07:00:47 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May  2 07:00:47 2013] Initial guess for spatial extent in simple fitting = 12.17"
[Thu May  2 07:00:47 2013] source mask rpix=2.8, npix_max = 43, mask sum = 29, frac = 0.667
[Thu May  2 07:00:47 2013] Giving source the simple spatial ID 306 for pass 1, mean size = 12.17"
[Fri May  3 13:00:14 2013] Source 317 is offset by -2.885816 and -3.955954 pixels which is larger than
2 X fitted extent = 2.880368 x 9.671541, not incorporating fit results
[Fri May  3 13:00:15 2013] Spatial fit model total counts = 5074.600000, observed total counts = 4992.000000
[Fri May  3 13:00:15 2013] Offset between fit and detection position for source 317 = 2.494615 pixels
[Fri May  3 13:00:15 2013] Warning, changing simple spatial fit ID from 306 to 52
[Fri May  3 13:00:15 2013] 5183.380000 total counts/ 4868.490000 bgd. counts: snr = 4.512963
Spatial fit parameters:
  Offset between fit and detection position for source 317 = 2.494615 pixels
  Position = (309.5, 410.0) = 16 22 32.92 -15 35 45.8
  Extent = 20.6 (15.1-41.3)" x 6.2 (5.7-7.0)", rotation angle = 302 (298-307) degrees
  Source counts = 314.9 +/- 72.0
  Background counts = 4868.5
  Rate = 0.1 +/- 0.03
[Fri May  3 13:00:16 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:16 2013] Assessing source extent using major axis lower bound
[Fri May  3 13:00:16 2013] Source does appear to be extended
[Fri May  3 13:00:16 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 2.15
[Fri May  3 13:00:16 2013] Source is asymmetric
[Fri May  3 13:03:13 2013] XMMSAS src. selection expression = ellipse(26879.486000, 35625.682000, 1238.148036, 370.866011, 301.841700, X, Y)
[Fri May  3 13:03:13 2013] Writing source region out to fullrun_pn_xmm0153950901_pi300-10000_pass1_cl_src317_src.reg
[Fri May  3 13:03:13 2013] Extracting stamp from image fullrun_pn_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (238, 339) - (381, 481)
[Fri May  3 13:03:13 2013] XMMSAS bgd. selection expression = annulus(26879.486000, 35625.682000, 2063.580059, 4127.160119, X, Y) && !ellipse(30657.014709, 38403.052063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31763.599040, 37975.966400, 2176.656063, 272.082408, 313.768000, X, Y) && !ellipse(29466.414612, 37699.057770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28924.623800, 39045.919200, 1704.792049, 759.043222, 327.761283, X, Y) && !ellipse(31342.691000, 37520.275200, 1876.064054, 234.508007, 310.759800, X, Y) && !ellipse(30652.060425, 37973.834717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29967.686798, 37092.088867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28634.612000, 36691.184200, 2009.312058, 251.164007, 305.699000, X, Y) && !ellipse(29644.290955, 36663.808746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29482.889069, 37279.483490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30774.454620, 36838.846863, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28207.707703, 36056.000854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28498.744049, 36483.888031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29481.331800, 36440.876000, 1787.024051, 418.100012, 307.307600, X, Y) && !ellipse(30185.497437, 36026.904388, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33058.897800, 35941.552000, 2082.056060, 260.257607, 130.704800, X, Y) && !ellipse(28972.239340, 35681.402400, 2119.736061, 388.528011, 304.213000, X, Y) && !ellipse(28734.044600, 35306.271400, 1686.552049, 380.809611, 123.037600, X, Y) && !ellipse(27886.446503, 35529.678467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32655.819200, 35455.717400, 1807.040052, 225.880006, 128.161000, X, Y) && !ellipse(29730.226400, 35278.943000, 1702.608049, 212.826406, 120.977000, X, Y) && !ellipse(28538.400400, 34964.736200, 2043.320059, 387.297611, 300.369000, X, Y) && !ellipse(27607.920654, 35095.225403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32080.912600, 34668.469800, 1740.704050, 217.588006, 303.992500, X, Y) && !ellipse(28277.939400, 34483.192220, 1614.856046, 389.620011, 117.692400, X, Y) && !ellipse(33155.915400, 34568.972000, 2362.488068, 560.821616, 303.295500, X, Y) && !ellipse(27352.259918, 34662.829987, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28011.686400, 33936.446200, 1940.760056, 370.568011, 115.580300, X, Y) && !ellipse(31778.445000, 34193.788720, 1906.336055, 238.292007, 121.760000, X, Y) && !ellipse(32683.366000, 33456.647000, 2484.736071, 310.592009, 115.683300, X, Y) && !ellipse(27730.309540, 33278.622498, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32445.566800, 33388.090000, 1661.016048, 823.720024, 119.958800, X, Y) && !ellipse(26594.072600, 33100.486982, 1503.744043, 231.064007, 113.568600, X, Y) && !ellipse(27526.089996, 32862.611267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32113.536000, 32106.976200, 1637.960047, 204.744806, 109.131000, X, Y) && !ellipse(27131.821400, 31572.698000, 1423.136041, 262.308008, 104.930000, X, Y) && !ellipse(31866.478790, 31359.288544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27042.234802, 31184.510620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26937.212463, 30750.283234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31184.306183, 30751.276215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27919.265320, 30783.789703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31136.250153, 38830.209106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29470.394501, 34834.615692, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29187.617950, 34314.285706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26874.158173, 33601.232452, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28843.555359, 33539.792419, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31360.525787, 33478.570099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28600.383881, 32926.143463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30844.459778, 32403.636353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28339.790100, 32225.648499, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26303.579102, 32310.123566, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31674.143158, 32155.699097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30520.801086, 31534.788635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29313.978760, 39181.591614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29798.603912, 39184.517456, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28070.193115, 37623.068176, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27073.593353, 37012.743317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27694.204000, 37071.190000, 1753.872050, 826.032024, 116.708000, X, Y) && !ellipse(26616.508820, 35005.992523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27345.324982, 33886.175507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26763.528412, 32316.620422, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26146.279236, 31896.812500, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28164.544891, 31529.207764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26571.158264, 31708.228424, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28060.794312, 31180.411255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30315.094727, 30925.342590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26403.466614, 31104.575653, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 13:03:13 2013] Writing fullrun_pn_xmm0153950901_pi300-10000_pass1_cl_src317.gif