[Wed May  1 00:46:11 2013] Detection parameters:
  Position = (415.6, 428.3) = 16 22 1.00 -15 34 22.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 476.8 +/- 30.2
  Background counts = 11.7
  Rate = 0.1 +/- 0.007

[Wed May  1 00:46:24 2013] Off-axis axis estimate = 12.68'
[Wed May  1 00:50:53 2013] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Wed May  1 00:50:53 2013] Initial guess for spatial extent in simple fitting = 12.77"
[Wed May  1 00:50:53 2013] source mask rpix=2.9, npix_max = 47, mask sum = 35, frac = 0.742
[Wed May  1 00:50:53 2013] Giving source the simple spatial ID 22 for pass 0, mean size = 12.77"
[Wed May  1 12:30:03 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src22.ximg exists
[Wed May  1 12:30:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src22.csv
[Wed May  1 12:30:03 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src22_1.ximg exists
[Wed May  1 12:30:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src22.csv
[Wed May  1 12:30:03 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed May  1 12:30:05 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src22.ximg exists
[Wed May  1 12:30:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src22.csv
[Wed May  1 12:30:05 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src22_1.ximg exists
[Wed May  1 12:30:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src22.csv
[Wed May  1 12:30:05 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:58:58 2013] Source 22 is offset by -0.261932 and -3.054482 pixels which is larger than
2 X fitted extent = 1.450106 x 1.450106, not incorporating fit results
[Thu May  2 06:58:58 2013] Source 22 is offset by 1.378413 and 3.448461 pixels which is larger than
2 X fitted extent = 1.459278 x 1.459278, not incorporating fit results
[Thu May  2 06:58:58 2013] Warning, spatial fit 22 centroid is now closest to src. 11
[Thu May  2 06:59:00 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:00 2013] Assessing source extent using major
[Thu May  2 06:59:00 2013] Source does appear to be extended
[Thu May  2 06:59:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 06:59:00 2013] Source is confused with source 6
[Thu May  2 07:00:47 2013] Using EEF radius (= 12.77 ")to estimate initial spatial extent for simple fitting
[Thu May  2 07:00:47 2013] Initial guess for spatial extent in simple fitting = 12.77"
[Thu May  2 07:00:47 2013] source mask rpix=2.9, npix_max = 47, mask sum = 35, frac = 0.742
[Thu May  2 07:00:47 2013] Giving source the simple spatial ID 22 for pass 1, mean size = 12.77"
[Thu May  2 17:48:55 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src22.ximg exists
[Thu May  2 17:48:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src22.csv
[Thu May  2 17:48:55 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src22_1.ximg exists
[Thu May  2 17:48:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src22.csv
[Thu May  2 17:48:55 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 17:48:57 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Thu May  2 17:48:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src22.csv
[Thu May  2 17:48:57 2013] fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Thu May  2 17:48:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src22.csv
[Thu May  2 17:48:57 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src22_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:14 2013] Source 22 is offset by 3.332873 and -2.846298 pixels which is larger than
2 X fitted extent = 1.459278 x 1.459278, not incorporating fit results
[Fri May  3 13:00:14 2013] Warning, spatial fit 22 centroid is now closest to src. 246
[Fri May  3 13:00:15 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:15 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:15 2013] Assessing source extent using major
[Fri May  3 13:00:15 2013] Source does appear to be extended
[Fri May  3 13:00:15 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 13:02:10 2013] XMMSAS src. selection expression = ellipse(36104.579926, 37211.358093, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 13:02:10 2013] Writing source region out to fullrun_pn_xmm0153950901_pi300-10000_pass1_cl_src22_src.reg
[Fri May  3 13:02:10 2013] Extracting stamp from image fullrun_pn_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (378, 391) - (453, 466)
[Fri May  3 13:02:10 2013] XMMSAS bgd. selection expression = annulus(36104.579926, 37211.358093, 1087.500000, 2175.000000, X, Y) && !ellipse(34790.316400, 36686.392400, 2264.784065, 285.972008, 312.690200, X, Y) && !ellipse(37874.512726, 37716.331390, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36436.697540, 36394.801178, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35922.245789, 37902.950745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31763.599040, 37975.966400, 2176.656063, 272.082408, 313.768000, X, Y) && !ellipse(35023.852905, 37885.236389, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34580.750200, 37501.365000, 1999.568058, 249.945607, 317.524200, X, Y) && !ellipse(37322.435600, 37182.804000, 2103.624061, 278.176008, 317.881100, X, Y) && !ellipse(36958.461800, 36835.730800, 2060.960059, 303.035209, 315.324200, X, Y) && !ellipse(33515.481200, 36450.540400, 1898.248055, 237.281607, 313.451600, X, Y) && !ellipse(35162.408264, 36222.760590, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34398.537750, 36236.510986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39057.997345, 36232.438171, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36972.398000, 35801.682000, 2034.712059, 861.872025, 309.816100, X, Y) && !ellipse(33058.897800, 35941.552000, 2082.056060, 260.257607, 130.704800, X, Y) && !ellipse(39655.630000, 35664.102000, 2142.456062, 267.806408, 314.197100, X, Y) && !ellipse(35833.405853, 35442.930695, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37820.796173, 35190.947174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32655.819200, 35455.717400, 1807.040052, 225.880006, 128.161000, X, Y) && !ellipse(39123.449127, 35182.785614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35367.603400, 35003.946000, 1906.728055, 522.918415, 310.159900, X, Y) && !ellipse(34086.988600, 35870.812800, 1874.744054, 408.071212, 310.033100, X, Y) && !ellipse(38907.637726, 34792.631714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40446.315000, 34705.628800, 2167.288062, 563.281616, 129.481400, X, Y) && !ellipse(36512.480042, 35196.841339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33962.532000, 34654.330000, 1649.832047, 253.566407, 115.649300, X, Y) && !ellipse(34933.108840, 34374.952000, 1835.112053, 756.670422, 122.561700, X, Y) && !ellipse(33155.915400, 34568.972000, 2362.488068, 560.821616, 303.295500, X, Y) && !ellipse(38723.353800, 34581.270000, 2077.592060, 259.698407, 128.068900, X, Y) && !ellipse(35920.790833, 34233.357758, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40330.160000, 34355.048000, 3408.464098, 1121.520032, 308.362800, X, Y) && !ellipse(38196.033600, 33859.057200, 2009.960058, 251.244807, 123.801000, X, Y) && !ellipse(35626.281600, 33810.166560, 1856.232053, 232.028807, 302.206000, X, Y) && !ellipse(32683.366000, 33456.647000, 2484.736071, 310.592009, 115.683300, X, Y) && !ellipse(37462.116000, 33417.212000, 1973.768057, 853.696025, 111.317600, X, Y) && !ellipse(39739.148000, 33916.876000, 2070.368060, 614.024818, 317.189000, X, Y) && !ellipse(33332.145600, 33513.493600, 1730.744050, 216.343206, 298.148700, X, Y) && !ellipse(32445.566800, 33388.090000, 1661.016048, 823.720024, 119.958800, X, Y) && !ellipse(37617.213600, 32898.413800, 2182.864063, 272.857608, 118.661000, X, Y) && !ellipse(38654.528000, 31881.824000, 3567.696103, 1222.904035, 308.714900, X, Y) && !ellipse(36827.082428, 37876.429657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38311.910217, 35696.393066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34684.845490, 35452.406494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34320.806000, 35127.094000, 1873.624054, 234.202407, 305.460000, X, Y) && !ellipse(38144.322000, 35049.576000, 2038.224059, 954.480027, 108.720000, X, Y) && !ellipse(37815.674622, 34325.012024, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33559.852000, 34422.030000, 1617.384047, 459.943213, 90.000000, X, Y) && !ellipse(37591.550323, 34831.137604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36000.765625, 34830.545532, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 13:02:10 2013] Writing fullrun_pn_xmm0153950901_pi300-10000_pass1_cl_src22.gif