[Wed May  1 00:46:36 2013] Detection parameters:
  Position = (336.1, 360.5) = 16 22 24.92 -15 39 21.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 541.3 +/- 28.9
  Background counts = 22.3
  Rate = 0.2 +/- 0.01

[Wed May  1 00:46:38 2013] Off-axis axis estimate = 5.26'
[Thu May  2 00:00:09 2013] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Thu May  2 00:00:09 2013] Initial guess for spatial extent in simple fitting = 9.06"
[Thu May  2 00:00:09 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.125
[Thu May  2 00:00:09 2013] Giving source the simple spatial ID 40 for pass 0, mean size = 9.06"
[Thu May  2 06:58:22 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src40.ximg exists
[Thu May  2 06:58:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src40.csv
[Thu May  2 06:58:22 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src40_1.ximg exists
[Thu May  2 06:58:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src40.csv
[Thu May  2 06:58:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:58:25 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src40.ximg exists
[Thu May  2 06:58:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu May  2 06:58:25 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src40_1.ximg exists
[Thu May  2 06:58:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src40.csv
[Thu May  2 06:58:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:59:38 2013] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 99 at 10.069377 pixels away
[Thu May  2 06:59:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:38 2013] Assessing source extent using major
[Thu May  2 06:59:38 2013] Source does appear to be extended
[Thu May  2 06:59:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 05:32:07 2013] Using EEF radius (= 9.06 ")to estimate initial spatial extent for simple fitting
[Fri May  3 05:32:07 2013] Initial guess for spatial extent in simple fitting = 9.06"
[Fri May  3 05:32:07 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.125
[Fri May  3 05:32:07 2013] Giving source the simple spatial ID 40 for pass 1, mean size = 9.06"
[Fri May  3 12:59:39 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src40.ximg exists
[Fri May  3 12:59:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src40.csv
[Fri May  3 12:59:39 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src40_1.ximg exists
[Fri May  3 12:59:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src40.csv
[Fri May  3 12:59:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 12:59:41 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Fri May  3 12:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src40.csv
[Fri May  3 12:59:41 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Fri May  3 12:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src40.csv
[Fri May  3 12:59:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:57 2013] Spatial fit model total counts = 1201.240000, observed total counts = 784.000000
[Fri May  3 13:00:57 2013] Poor agreement between spatial fit and data for source 99
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 13:00:57 2013] Spatial fit model total counts = 868.171000, observed total counts = 763.000000
[Fri May  3 13:00:57 2013] Poor agreement between spatial fit and data for source 99
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 13:00:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:57 2013] Assessing source extent using major
[Fri May  3 13:00:57 2013] Source does appear to be extended
[Fri May  3 13:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 15:27:51 2013] XMMSAS src. selection expression = ellipse(29190.480072, 31312.990143, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 15:27:51 2013] Writing source region out to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src99_src.reg
[Fri May  3 15:27:51 2013] Extracting stamp from image fullrun_mos2_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (299, 323) - (374, 398)
[Fri May  3 15:27:51 2013] XMMSAS bgd. selection expression = annulus(29190.480072, 31312.990143, 1087.500000, 2175.000000, X, Y) && !ellipse(27702.035000, 33704.058400, 1549.512045, 632.285618, 90.000000, X, Y) && !ellipse(27294.603200, 30352.989200, 1529.696044, 191.212006, 103.447500, X, Y) && !ellipse(28164.459400, 34632.619000, 1813.968052, 226.746407, 116.804400, X, Y) && !ellipse(27751.985199, 32047.174774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26909.754220, 28364.462800, 1352.032039, 169.004005, 98.261730, X, Y) && !ellipse(27104.158920, 29511.740860, 1436.544041, 179.568005, 101.391100, X, Y) && !ellipse(27359.709930, 32754.567505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27384.539764, 30660.638824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29385.276917, 32308.142914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27014.353480, 29050.220200, 1403.432040, 175.428805, 99.550900, X, Y) && !ellipse(28912.361000, 29939.840000, 1540.960044, 192.620006, 98.673460, X, Y) && !ellipse(33108.122000, 33989.754200, 2561.792074, 320.224009, 119.932700, X, Y) && !ellipse(28861.551600, 29500.470800, 1330.320038, 166.290405, 95.579860, X, Y) && !ellipse(28767.844700, 28070.775800, 1425.368041, 178.171205, 89.106009, X, Y) && !ellipse(27362.787109, 28403.986053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26764.239960, 33800.224243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29774.549347, 34064.094330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26547.470093, 33276.878143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26255.953186, 32566.567535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29319.296783, 33146.117950, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 15:27:51 2013] Writing fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src99.gif
[Fri May  3 16:48:27 2013] Mean detx,y = (5419.49, -6324.28) 
[Fri May  3 16:48:28 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 16:48:43 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 16:48:43 2013] Setting source spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src99_src_b10.pi.gz
[Fri May  3 16:48:43 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src99_bgd.pi.gz
[Fri May  3 19:44:12 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  3 19:44:12 2013] rmf not generated due to insufficient counts