[Wed May  1 00:46:33 2013] Detection parameters:
  Position = (478.9, 256.1) = 16 21 41.88 -15 46 53.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 777.6 +/- 34.7
  Background counts = 12.2
  Rate = 0.2 +/- 0.008

[Wed May  1 00:46:38 2013] Off-axis axis estimate = 13.44'
[Thu May  2 00:00:09 2013] Using EEF radius (= 13.15 ")to estimate initial spatial extent for simple fitting
[Thu May  2 00:00:09 2013] Initial guess for spatial extent in simple fitting = 13.15"
[Thu May  2 00:00:09 2013] source mask rpix=3.0, npix_max = 49, mask sum = 47, frac = 0.947
[Thu May  2 00:00:09 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 13.15"
[Thu May  2 06:58:22 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src45.ximg exists
[Thu May  2 06:58:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src45.csv
[Thu May  2 06:58:22 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src45_1.ximg exists
[Thu May  2 06:58:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src45.csv
[Thu May  2 06:58:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:58:25 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Thu May  2 06:58:25 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Thu May  2 06:58:25 2013] Fit fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src45 appears to have run properly
[Thu May  2 06:59:38 2013] Source 7 is offset by -4.307069 and 1.197778 pixels which is larger than
2 X fitted extent = 1.480667 x 1.480667, not incorporating fit results
[Thu May  2 06:59:38 2013] Spatial fit model total counts = 1598.600000, observed total counts = 1705.000000
[Thu May  2 06:59:38 2013] Offset between fit and detection position for source 7 = 0.066086 pixels
[Thu May  2 06:59:38 2013] 1484.431000 total counts/ 1010.010000 bgd. counts: snr = 14.927981
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.066086 pixels
  Position = (478.8, 256.0) = 16 21 41.90 -15 46 55.3
  Extent = 5.3 (5.1-5.6)", rotation angle = 0
  Source counts = 474.4 +/- 38.5
  Background counts = 1010.0
  Rate = 0.1 +/- 0.009
[Thu May  2 06:59:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:38 2013] Assessing source extent using major axis lower bound
[Thu May  2 06:59:38 2013] Source does appear to be extended
[Thu May  2 06:59:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 05:32:07 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 05:32:07 2013] Initial guess for spatial extent in simple fitting = 5.33"
[Fri May  3 05:32:07 2013] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.344
[Fri May  3 05:32:07 2013] Giving source the simple spatial ID 45 for pass 1, mean size = 5.33"
[Fri May  3 12:59:39 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src45.ximg exists
[Fri May  3 12:59:39 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src45_1.ximg exists
[Fri May  3 12:59:39 2013] Fit fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src45 appears to have run properly
[Fri May  3 12:59:41 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src45.ximg exists
[Fri May  3 12:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src45.csv
[Fri May  3 12:59:41 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src45_1.ximg exists
[Fri May  3 12:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src45.csv
[Fri May  3 12:59:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:57 2013] Warning, spatial fit 45 centroid is now closest to src. 6
[Fri May  3 13:00:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:57 2013] Assessing source extent using major axis lower bound
[Fri May  3 13:00:57 2013] Source does appear to be extended
[Fri May  3 13:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 15:27:52 2013] XMMSAS src. selection expression = ellipse(41608.958400, 22226.288400, 319.735809, 319.735809, 0.000000, X, Y)
[Fri May  3 15:27:52 2013] Writing source region out to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src7_src.reg
[Fri May  3 15:27:52 2013] Extracting stamp from image fullrun_mos2_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (460, 238) - (497, 274)
[Fri May  3 15:27:52 2013] XMMSAS bgd. selection expression = annulus(41608.958400, 22226.288400, 532.893015, 1065.786031, X, Y) && !ellipse(40547.065200, 23407.776200, 2009.368058, 251.171207, 53.399100, X, Y) && !ellipse(41074.295624, 22740.192596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40433.987518, 23537.524445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41449.496399, 21453.799042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40685.312592, 20888.065399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40946.705536, 21915.422348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39839.582214, 21935.952362, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 15:27:52 2013] Writing fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src7.gif
[Fri May  3 17:00:06 2013] Mean detx,y = (15867.02, 4994.34) 
[Fri May  3 17:00:07 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 17:00:12 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 17:00:12 2013] Setting source spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Fri May  3 17:00:12 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src7_bgd.pi.gz