[Wed May  1 00:46:35 2013] Detection parameters:
  Position = (338.9, 206.9) = 16 22 24.06 -15 50 30.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 762.8 +/- 33.5
  Background counts = 20.1
  Rate = 0.3 +/- 0.01

[Wed May  1 00:46:38 2013] Off-axis axis estimate = 7.26'
[Thu May  2 00:00:09 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Thu May  2 00:00:09 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Thu May  2 00:00:09 2013] source mask rpix=2.3, npix_max = 31, mask sum = 33, frac = 1.043
[Thu May  2 00:00:09 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 10.06"
[Thu May  2 06:58:22 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src12.ximg exists
[Thu May  2 06:58:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src12.csv
[Thu May  2 06:58:22 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src12_1.ximg exists
[Thu May  2 06:58:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src12.csv
[Thu May  2 06:58:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:58:24 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Thu May  2 06:58:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu May  2 06:58:24 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Thu May  2 06:58:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src12.csv
[Thu May  2 06:58:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:59:37 2013] Warning, spatial fit 12 centroid is now closest to src. 60
[Thu May  2 06:59:38 2013] Source 59 is offset by -2.183508 and 3.472969 pixels which is larger than
2 X fitted extent = 9.583357 x 3.232235, not incorporating fit results
[Thu May  2 06:59:38 2013] Spatial fit model total counts = 1103.170000, observed total counts = 974.000000
[Thu May  2 06:59:38 2013] Poor agreement between spatial fit and data for source 59
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  2 06:59:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:38 2013] Assessing source extent using major
[Thu May  2 06:59:38 2013] Source does appear to be extended
[Thu May  2 06:59:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 05:32:07 2013] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Fri May  3 05:32:07 2013] Initial guess for spatial extent in simple fitting = 10.06"
[Fri May  3 05:32:07 2013] source mask rpix=2.3, npix_max = 31, mask sum = 33, frac = 1.043
[Fri May  3 05:32:07 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 10.06"
[Fri May  3 12:59:38 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src12.ximg exists
[Fri May  3 12:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src12.csv
[Fri May  3 12:59:38 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri May  3 12:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src12.csv
[Fri May  3 12:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 12:59:40 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri May  3 12:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri May  3 12:59:40 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri May  3 12:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src12.csv
[Fri May  3 12:59:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:56 2013] Spatial fit model total counts = 1813.980000, observed total counts = 1502.000000
[Fri May  3 13:00:56 2013] Poor agreement between spatial fit and data for source 59
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 13:00:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:57 2013] Assessing source extent using major
[Fri May  3 13:00:57 2013] Source does appear to be extended
[Fri May  3 13:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 15:27:47 2013] XMMSAS src. selection expression = ellipse(29435.350769, 17948.722290, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 15:27:47 2013] Writing source region out to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src59_src.reg
[Fri May  3 15:27:47 2013] Extracting stamp from image fullrun_mos2_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (301, 169) - (376, 244)
[Fri May  3 15:27:47 2013] XMMSAS bgd. selection expression = annulus(29435.350769, 17948.722290, 1087.500000, 2175.000000, X, Y) && !ellipse(30253.802000, 16963.570000, 1667.504048, 590.900817, 226.701000, X, Y) && !ellipse(30027.900208, 17258.633713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28414.429200, 19493.211000, 1731.760050, 240.056807, 57.616600, X, Y) && !ellipse(28918.504181, 18745.314713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28008.426200, 20193.685200, 1432.160041, 277.905608, 62.261000, X, Y) && !ellipse(31788.711000, 19529.419000, 1616.000046, 202.000006, 52.254100, X, Y) && !ellipse(30649.571800, 21243.610800, 1660.448048, 207.556006, 60.562300, X, Y) && !ellipse(31318.398000, 15958.842000, 1842.568053, 230.321607, 46.548900, X, Y) && !ellipse(31435.026640, 20011.096800, 1767.600051, 220.949606, 54.417900, X, Y) && !ellipse(30458.597200, 21595.651600, 1618.112047, 202.264006, 62.594000, X, Y) && !ellipse(31004.706400, 20650.435600, 1719.944049, 214.992806, 57.446800, X, Y) && !ellipse(29242.258400, 20480.807700, 1458.656042, 182.332005, 60.314000, X, Y) && !ellipse(27948.141418, 17640.967224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30432.228000, 13932.822000, 1994.976057, 1994.976057, 0.000000, X, Y) && !ellipse(30145.377289, 19095.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32747.175200, 15173.845600, 1878.184054, 234.772807, 37.048900, X, Y) && !ellipse(32293.131378, 15503.506683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.261627, 16965.845047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.754120, 18337.904449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29542.157288, 19963.706329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29832.017456, 19604.734421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28576.446136, 17006.863922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30694.878082, 18273.607605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.637970, 19334.802902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.460541, 16328.942017, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 15:27:47 2013] Writing fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src59.gif
[Fri May  3 15:54:49 2013] Mean detx,y = (3089.57, 6917.35) 
[Fri May  3 15:54:50 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 15:55:00 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 15:55:00 2013] Setting source spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src59_src_b10.pi.gz
[Fri May  3 15:55:00 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src59_bgd.pi.gz
[Fri May  3 18:48:36 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  3 18:48:36 2013] rmf not generated due to insufficient counts