[Wed May  1 00:46:34 2013] Detection parameters:
  Position = (394.0, 265.1) = 16 22 7.46 -15 46 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 646.1 +/- 31.4
  Background counts = 17.6
  Rate = 0.3 +/- 0.01

[Wed May  1 00:46:38 2013] Off-axis axis estimate = 7.34'
[Thu May  2 00:00:09 2013] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Thu May  2 00:00:09 2013] Initial guess for spatial extent in simple fitting = 10.10"
[Thu May  2 00:00:09 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.131
[Thu May  2 00:00:09 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 10.10"
[Thu May  2 06:58:22 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src15.ximg exists
[Thu May  2 06:58:22 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu May  2 06:58:22 2013] Fit fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src15 appears to have run properly
[Thu May  2 06:58:24 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu May  2 06:58:24 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu May  2 06:58:24 2013] Fit fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Thu May  2 06:59:38 2013] Source 51 is offset by -0.486611 and 1.246639 pixels which is larger than
2 X fitted extent = 9.285793 x 1.160726, not incorporating fit results
[Thu May  2 06:59:38 2013] Warning: source 29 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 51 at 12.920645 pixels away
[Thu May  2 06:59:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:38 2013] Assessing source extent using major
[Thu May  2 06:59:38 2013] Source does appear to be extended
[Thu May  2 06:59:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 06:59:38 2013] Source is confused with source 54
[Fri May  3 05:32:07 2013] Using EEF radius (= 10.10 ")to estimate initial spatial extent for simple fitting
[Fri May  3 05:32:07 2013] Initial guess for spatial extent in simple fitting = 10.10"
[Fri May  3 05:32:07 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.131
[Fri May  3 05:32:07 2013] Giving source the simple spatial ID 15 for pass 1, mean size = 10.10"
[Fri May  3 12:59:38 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src15.ximg exists
[Fri May  3 12:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src15.csv
[Fri May  3 12:59:38 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri May  3 12:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src15.csv
[Fri May  3 12:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 12:59:40 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri May  3 12:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src15.csv
[Fri May  3 12:59:40 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri May  3 12:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src15.csv
[Fri May  3 12:59:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:56 2013] Spatial fit model total counts = 1248.160000, observed total counts = 1409.000000
[Fri May  3 13:00:56 2013] Poor agreement between spatial fit and data for source 51
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 13:00:56 2013] Source 51 is offset by 0.431681 and -3.171761 pixels which is larger than
2 X fitted extent = 1.183922 x 1.183922, not incorporating fit results
[Fri May  3 13:00:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:57 2013] Assessing source extent using major
[Fri May  3 13:00:57 2013] Source does appear to be extended
[Fri May  3 13:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 15:27:48 2013] XMMSAS src. selection expression = ellipse(34230.360229, 23011.496765, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 15:27:48 2013] Writing source region out to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src51_src.reg
[Fri May  3 15:27:48 2013] Extracting stamp from image fullrun_mos2_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (357, 228) - (432, 303)
[Fri May  3 15:27:48 2013] XMMSAS bgd. selection expression = annulus(34230.360229, 23011.496765, 1087.500000, 2175.000000, X, Y) && !ellipse(33237.761400, 26671.247600, 1520.696044, 190.087205, 84.488450, X, Y) && !ellipse(34749.456380, 21972.812200, 1674.160048, 209.269606, 60.381500, X, Y) && !ellipse(34580.150200, 22502.354000, 1576.456045, 986.664028, 90.000000, X, Y) && !ellipse(33263.051060, 26434.708600, 1521.448044, 190.180805, 82.465480, X, Y) && !ellipse(31788.711000, 19529.419000, 1616.000046, 202.000006, 52.254100, X, Y) && !ellipse(30649.571800, 21243.610800, 1660.448048, 207.556006, 60.562300, X, Y) && !ellipse(31435.026640, 20011.096800, 1767.600051, 220.949606, 54.417900, X, Y) && !ellipse(30458.597200, 21595.651600, 1618.112047, 202.264006, 62.594000, X, Y) && !ellipse(31004.706400, 20650.435600, 1719.944049, 214.992806, 57.446800, X, Y) && !ellipse(35432.733920, 20915.582400, 1750.440050, 218.805606, 53.823500, X, Y) && !ellipse(35802.148193, 20480.341843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36595.558563, 20082.894577, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 15:27:48 2013] Writing fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src51.gif
[Fri May  3 15:58:41 2013] Mean detx,y = (8862.87, 2837.10) 
[Fri May  3 15:58:42 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 15:58:52 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 15:58:53 2013] Setting source spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src51_src_b10.pi.gz
[Fri May  3 15:58:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src51_bgd.pi.gz
[Fri May  3 18:52:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  3 18:52:23 2013] rmf not generated due to insufficient counts