[Wed May  1 00:46:34 2013] Detection parameters:
  Position = (466.5, 344.0) = 16 21 45.63 -15 40 35.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 419.6 +/- 26.4
  Background counts = 30.1
  Rate = 0.1 +/- 0.006

[Wed May  1 00:46:38 2013] Off-axis axis estimate = 12.63'
[Thu May  2 00:00:09 2013] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Thu May  2 00:00:09 2013] Initial guess for spatial extent in simple fitting = 12.74"
[Thu May  2 00:00:09 2013] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.893
[Thu May  2 00:00:09 2013] Giving source the simple spatial ID 94 for pass 0, mean size = 12.74"
[Thu May  2 06:58:23 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src94.ximg exists
[Thu May  2 06:58:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src94.csv
[Thu May  2 06:58:23 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src94_1.ximg exists
[Thu May  2 06:58:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src94.csv
[Thu May  2 06:58:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:58:26 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src94.ximg exists
[Thu May  2 06:58:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src94.csv
[Thu May  2 06:58:26 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src94_1.ximg exists
[Thu May  2 06:58:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src94.csv
[Thu May  2 06:58:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:59:38 2013] Warning, spatial fit 94 centroid is now closest to src. 4
[Thu May  2 06:59:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:38 2013] Assessing source extent using major
[Thu May  2 06:59:38 2013] Source does appear to be extended
[Thu May  2 06:59:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 05:32:07 2013] Using EEF radius (= 12.74 ")to estimate initial spatial extent for simple fitting
[Fri May  3 05:32:07 2013] Initial guess for spatial extent in simple fitting = 12.74"
[Fri May  3 05:32:07 2013] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.893
[Fri May  3 05:32:07 2013] Giving source the simple spatial ID 94 for pass 1, mean size = 12.74"
[Fri May  3 12:59:40 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src94.ximg exists
[Fri May  3 12:59:40 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src94_1.ximg exists
[Fri May  3 12:59:40 2013] Fit fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src94 appears to have run properly
[Fri May  3 12:59:42 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src94.ximg exists
[Fri May  3 12:59:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src94.csv
[Fri May  3 12:59:42 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src94_1.ximg exists
[Fri May  3 12:59:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src94.csv
[Fri May  3 12:59:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src94_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src94.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:57 2013] Spatial fit model total counts = 883.434000, observed total counts = 841.000000
[Fri May  3 13:00:57 2013] Offset between fit and detection position for source 39 = 1.400030 pixels
[Fri May  3 13:00:57 2013] 884.300000 total counts/ 349.177000 bgd. counts: snr = 28.637217
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 1.400030 pixels
  Position = (466.6, 345.4) = 16 21 45.61 -15 40 26.5
  Extent = 25.5 (25.4-51.0)", rotation angle = 101 (100-102) degrees
  Source counts = 535.1 +/- 29.7
  Background counts = 349.2
  Rate = 0.1 +/- 0.007
[Fri May  3 13:00:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:57 2013] Assessing source extent using major axis lower bound
[Fri May  3 13:00:57 2013] Source does appear to be extended
[Fri May  3 13:00:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 7.86
[Fri May  3 13:00:57 2013] Source is asymmetric
[Fri May  3 13:00:57 2013] Source is confused with source 4
[Fri May  3 15:27:56 2013] XMMSAS src. selection expression = ellipse(40546.965400, 30003.650200, 1529.082044, 191.134805, 101.256200, X, Y)
[Fri May  3 15:27:56 2013] Writing source region out to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src39_src.reg
[Fri May  3 15:27:56 2013] Extracting stamp from image fullrun_mos2_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (379, 258) - (554, 433)
[Fri May  3 15:27:56 2013] XMMSAS bgd. selection expression = annulus(40546.965400, 30003.650200, 2548.470073, 5096.940147, X, Y) && !ellipse(41711.470795, 27289.964966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40547.065200, 23407.776200, 2009.368058, 251.171207, 53.399100, X, Y) && !ellipse(33663.271400, 34891.155800, 1814.624052, 226.828807, 124.352200, X, Y) && !ellipse(34139.456300, 32027.523200, 1714.528049, 214.316006, 109.975200, X, Y) && !ellipse(33108.122000, 33989.754200, 2561.792074, 320.224009, 119.932700, X, Y) && !ellipse(40380.727631, 31164.680206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34040.044600, 31741.287380, 1904.760055, 238.095207, 108.623500, X, Y) && !ellipse(37088.207214, 29012.786926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37151.858887, 29795.019623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37268.436440, 30505.198400, 1654.944048, 345.388810, 90.000000, X, Y) && !ellipse(37600.070312, 24211.092102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36318.108002, 33770.312683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37081.237762, 28143.647156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37193.473816, 27090.776703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34781.276154, 33449.813477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36767.657562, 32927.800201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35209.261566, 34149.583618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38789.212799, 32321.702148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38108.771271, 24303.096832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39805.534119, 31788.404999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37127.068878, 27527.855591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38605.914886, 31884.591400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38344.572388, 31096.360992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40711.379669, 30593.264801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36495.732117, 26599.524597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38085.385773, 30015.745483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38441.358826, 31445.101746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38041.676025, 29623.441010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39344.435181, 24232.117279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38001.008942, 28491.686981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39274.297272, 30030.149017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38064.841156, 27710.720734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39038.570496, 24632.283295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36062.718079, 35692.994629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39240.881073, 29367.305023, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 15:27:56 2013] Writing fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src39.gif
[Fri May  3 18:00:31 2013] Mean detx,y = (16305.86, -3262.04) 
[Fri May  3 18:00:32 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 18:00:56 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 18:00:56 2013] Setting source spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Fri May  3 18:00:56 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src39_bgd.pi.gz