[Wed May  1 00:46:34 2013] Detection parameters:
  Position = (319.5, 368.9) = 16 22 29.90 -15 38 44.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 767.2 +/- 33.8
  Background counts = 21.3
  Rate = 0.3 +/- 0.01

[Wed May  1 00:46:38 2013] Off-axis axis estimate = 5.33'
[Thu May  2 00:00:09 2013] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Thu May  2 00:00:09 2013] Initial guess for spatial extent in simple fitting = 9.10"
[Thu May  2 00:00:09 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.117
[Thu May  2 00:00:09 2013] Giving source the simple spatial ID 19 for pass 0, mean size = 9.10"
[Thu May  2 06:58:22 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src19.ximg exists
[Thu May  2 06:58:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src19.csv
[Thu May  2 06:58:22 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src19_1.ximg exists
[Thu May  2 06:58:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src19.csv
[Thu May  2 06:58:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:58:24 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src19.ximg exists
[Thu May  2 06:58:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu May  2 06:58:24 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src19_1.ximg exists
[Thu May  2 06:58:24 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src19.csv
[Thu May  2 06:58:24 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:59:38 2013] Spatial fit model total counts = 1162.120000, observed total counts = 1333.000000
[Thu May  2 06:59:38 2013] Poor agreement between spatial fit and data for source 32
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  2 06:59:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:38 2013] Assessing source extent using major
[Thu May  2 06:59:38 2013] Source does appear to be extended
[Thu May  2 06:59:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 05:32:07 2013] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Fri May  3 05:32:07 2013] Initial guess for spatial extent in simple fitting = 9.10"
[Fri May  3 05:32:07 2013] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.117
[Fri May  3 05:32:07 2013] Giving source the simple spatial ID 19 for pass 1, mean size = 9.10"
[Fri May  3 12:59:38 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src19.ximg exists
[Fri May  3 12:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src19.csv
[Fri May  3 12:59:38 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri May  3 12:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src19.csv
[Fri May  3 12:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 12:59:40 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri May  3 12:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May  3 12:59:40 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri May  3 12:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May  3 12:59:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:56 2013] Warning, spatial fit 19 centroid is now closest to src. 29
[Fri May  3 13:00:56 2013] Source 32 is offset by -3.268630 and 8.531733 pixels which is larger than
2 X fitted extent = 0.976915 x 0.976915, not incorporating fit results
[Fri May  3 13:00:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:57 2013] Assessing source extent using major
[Fri May  3 13:00:57 2013] Source does appear to be extended
[Fri May  3 13:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 15:27:48 2013] XMMSAS src. selection expression = ellipse(27751.985199, 32047.174774, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 15:27:48 2013] Writing source region out to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src32_src.reg
[Fri May  3 15:27:48 2013] Extracting stamp from image fullrun_mos2_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (282, 331) - (357, 406)
[Fri May  3 15:27:48 2013] XMMSAS bgd. selection expression = annulus(27751.985199, 32047.174774, 1087.500000, 2175.000000, X, Y) && !ellipse(28578.291000, 35379.616040, 1675.736048, 209.467206, 121.311600, X, Y) && !ellipse(27702.035000, 33704.058400, 1549.512045, 632.285618, 90.000000, X, Y) && !ellipse(27294.603200, 30352.989200, 1529.696044, 191.212006, 103.447500, X, Y) && !ellipse(28164.459400, 34632.619000, 1813.968052, 226.746407, 116.804400, X, Y) && !ellipse(27104.158920, 29511.740860, 1436.544041, 179.568005, 101.391100, X, Y) && !ellipse(27359.709930, 32754.567505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27384.539764, 30660.638824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29385.276917, 32308.142914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29190.480072, 31312.990143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27014.353480, 29050.220200, 1403.432040, 175.428805, 99.550900, X, Y) && !ellipse(28912.361000, 29939.840000, 1540.960044, 192.620006, 98.673460, X, Y) && !ellipse(28861.551600, 29500.470800, 1330.320038, 166.290405, 95.579860, X, Y) && !ellipse(26115.783569, 32060.601257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30106.959015, 34646.626343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26764.239960, 33800.224243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27178.182922, 34662.991943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25724.039307, 29624.317169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29774.549347, 34064.094330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25964.834534, 31571.542206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26547.470093, 33276.878143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26255.953186, 32566.567535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25883.696838, 30642.804993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29319.296783, 33146.117950, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 15:27:48 2013] Writing fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src32.gif
[Fri May  3 16:10:02 2013] Mean detx,y = (4106.86, -7231.95) 
[Fri May  3 16:10:03 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 16:10:10 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 16:10:11 2013] Setting source spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Fri May  3 16:10:11 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Fri May  3 19:03:35 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  3 19:03:35 2013] rmf not generated due to insufficient counts