[Wed May  1 00:46:34 2013] Detection parameters:
  Position = (383.8, 396.1) = 16 22 10.56 -15 36 47.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 638.3 +/- 33.0
  Background counts = 17.4
  Rate = 0.1 +/- 0.007

[Wed May  1 00:46:38 2013] Off-axis axis estimate = 9.40'
[Thu May  2 00:00:09 2013] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Thu May  2 00:00:09 2013] Initial guess for spatial extent in simple fitting = 11.13"
[Thu May  2 00:00:09 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.962
[Thu May  2 00:00:09 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 11.13"
[Thu May  2 06:58:23 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src61.ximg exists
[Thu May  2 06:58:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src61.csv
[Thu May  2 06:58:23 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src61_1.ximg exists
[Thu May  2 06:58:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src61.csv
[Thu May  2 06:58:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:58:25 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Thu May  2 06:58:25 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Thu May  2 06:58:25 2013] Fit fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src61 appears to have run properly
[Thu May  2 06:59:38 2013] Source 23 is offset by 1.254827 and -0.579388 pixels which is larger than
2 X fitted extent = 1.232786 x 1.232786, not incorporating fit results
[Thu May  2 06:59:38 2013] Warning, spatial fit 61 centroid is now closest to src. 25
[Thu May  2 06:59:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:38 2013] Assessing source extent using major
[Thu May  2 06:59:38 2013] Source does appear to be extended
[Thu May  2 06:59:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 06:59:38 2013] Source is confused with source 19
[Fri May  3 05:32:07 2013] Using EEF radius (= 11.13 ")to estimate initial spatial extent for simple fitting
[Fri May  3 05:32:07 2013] Initial guess for spatial extent in simple fitting = 11.13"
[Fri May  3 05:32:07 2013] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.962
[Fri May  3 05:32:07 2013] Giving source the simple spatial ID 61 for pass 1, mean size = 11.13"
[Fri May  3 12:59:39 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src61.ximg exists
[Fri May  3 12:59:39 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src61_1.ximg exists
[Fri May  3 12:59:39 2013] Fit fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src61 appears to have run properly
[Fri May  3 12:59:41 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src61.ximg exists
[Fri May  3 12:59:41 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src61_1.ximg exists
[Fri May  3 12:59:41 2013] Fit fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src61 appears to have run properly
[Fri May  3 13:00:57 2013] Warning, spatial fit 61 centroid is now closest to src. 20
[Fri May  3 13:00:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:57 2013] Assessing source extent using major
[Fri May  3 13:00:57 2013] Source does appear to be extended
[Fri May  3 13:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 15:27:53 2013] XMMSAS src. selection expression = ellipse(33339.443909, 34410.525208, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 15:27:53 2013] Writing source region out to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src23_src.reg
[Fri May  3 15:27:53 2013] Extracting stamp from image fullrun_mos2_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (346, 359) - (421, 434)
[Fri May  3 15:27:54 2013] XMMSAS bgd. selection expression = annulus(33339.443909, 34410.525208, 1087.500000, 2175.000000, X, Y) && !ellipse(31910.386820, 38347.746800, 1953.544056, 244.192807, 135.785000, X, Y) && !ellipse(33663.271400, 34891.155800, 1814.624052, 226.828807, 124.352200, X, Y) && !ellipse(34036.081116, 35432.592010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34139.456300, 32027.523200, 1714.528049, 214.316006, 109.975200, X, Y) && !ellipse(33108.122000, 33989.754200, 2561.792074, 320.224009, 119.932700, X, Y) && !ellipse(34040.044600, 31741.287380, 1904.760055, 238.095207, 108.623500, X, Y) && !ellipse(32649.489410, 33189.965759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36318.108002, 33770.312683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30656.412018, 37116.924011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34781.276154, 33449.813477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35209.261566, 34149.583618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32320.398529, 32307.962372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36062.718079, 35692.994629, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 15:27:54 2013] Writing fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src23.gif
[Fri May  3 17:22:16 2013] Mean detx,y = (10110.66, -8531.25) 
[Fri May  3 17:22:18 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 17:22:26 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 17:22:26 2013] Setting source spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Fri May  3 17:22:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Fri May  3 20:40:50 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  3 20:40:50 2013] rmf not generated due to insufficient counts