[Wed May  1 00:46:38 2013] Detection parameters:
  Position = (321.8, 203.3) = 16 22 29.22 -15 50 48.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 298.6 +/- 21.9
  Background counts = 19.6
  Rate = 0.1 +/- 0.008

[Wed May  1 00:46:38 2013] Off-axis axis estimate = 7.10'
[Thu May  2 00:00:09 2013] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Thu May  2 00:00:09 2013] Initial guess for spatial extent in simple fitting = 9.98"
[Thu May  2 00:00:09 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.897
[Thu May  2 00:00:09 2013] Giving source the simple spatial ID 79 for pass 0, mean size = 9.98"
[Thu May  2 06:58:23 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src79.ximg exists
[Thu May  2 06:58:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src79.csv
[Thu May  2 06:58:23 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src79_1.ximg exists
[Thu May  2 06:58:23 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src79.csv
[Thu May  2 06:58:23 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:58:26 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src79.ximg exists
[Thu May  2 06:58:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src79.csv
[Thu May  2 06:58:26 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src79_1.ximg exists
[Thu May  2 06:58:26 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src79.csv
[Thu May  2 06:58:26 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:59:38 2013] Warning, spatial fit 79 centroid is now closest to src. 169
[Thu May  2 06:59:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:38 2013] Assessing source extent using major
[Thu May  2 06:59:38 2013] Source does appear to be extended
[Thu May  2 06:59:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 05:32:07 2013] Using EEF radius (= 9.98 ")to estimate initial spatial extent for simple fitting
[Fri May  3 05:32:07 2013] Initial guess for spatial extent in simple fitting = 9.98"
[Fri May  3 05:32:07 2013] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.897
[Fri May  3 05:32:07 2013] Giving source the simple spatial ID 79 for pass 1, mean size = 9.98"
[Fri May  3 12:59:40 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src79.ximg exists
[Fri May  3 12:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src79.csv
[Fri May  3 12:59:40 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src79_1.ximg exists
[Fri May  3 12:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src79.csv
[Fri May  3 12:59:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 12:59:42 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src79.ximg exists
[Fri May  3 12:59:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src79.csv
[Fri May  3 12:59:42 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src79_1.ximg exists
[Fri May  3 12:59:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src79.csv
[Fri May  3 12:59:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src79_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src79.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:57 2013] Warning, spatial fit 79 centroid is now closest to src. 162
[Fri May  3 13:00:57 2013] Spatial fit model total counts = 1165.230000, observed total counts = 974.000000
[Fri May  3 13:00:57 2013] Poor agreement between spatial fit and data for source 166
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 13:00:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:57 2013] Assessing source extent using major
[Fri May  3 13:00:57 2013] Source does appear to be extended
[Fri May  3 13:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 15:27:55 2013] XMMSAS src. selection expression = ellipse(27948.141418, 17640.967224, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 15:27:55 2013] Writing source region out to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src166_src.reg
[Fri May  3 15:27:55 2013] Extracting stamp from image fullrun_mos2_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (284, 166) - (359, 241)
[Fri May  3 15:27:55 2013] XMMSAS bgd. selection expression = annulus(27948.141418, 17640.967224, 1087.500000, 2175.000000, X, Y) && !ellipse(30253.802000, 16963.570000, 1667.504048, 590.900817, 226.701000, X, Y) && !ellipse(29435.350769, 17948.722290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30027.900208, 17258.633713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28414.429200, 19493.211000, 1731.760050, 240.056807, 57.616600, X, Y) && !ellipse(28918.504181, 18745.314713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28008.426200, 20193.685200, 1432.160041, 277.905608, 62.261000, X, Y) && !ellipse(30649.571800, 21243.610800, 1660.448048, 207.556006, 60.562300, X, Y) && !ellipse(31318.398000, 15958.842000, 1842.568053, 230.321607, 46.548900, X, Y) && !ellipse(31435.026640, 20011.096800, 1767.600051, 220.949606, 54.417900, X, Y) && !ellipse(31004.706400, 20650.435600, 1719.944049, 214.992806, 57.446800, X, Y) && !ellipse(29242.258400, 20480.807700, 1458.656042, 182.332005, 60.314000, X, Y) && !ellipse(30432.228000, 13932.822000, 1994.976057, 1994.976057, 0.000000, X, Y) && !ellipse(30145.377289, 19095.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28047.261627, 16965.845047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.754120, 18337.904449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29542.157288, 19963.706329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29832.017456, 19604.734421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28576.446136, 17006.863922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30694.878082, 18273.607605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.637970, 19334.802902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.460541, 16328.942017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25538.691711, 19969.503586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25562.852478, 20386.657806, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 15:27:55 2013] Writing fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src166.gif
[Fri May  3 17:42:42 2013] Mean detx,y = (1524.17, 6991.42) 
[Fri May  3 17:42:43 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 17:43:07 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 17:43:07 2013] Setting source spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src166_src_b10.pi.gz
[Fri May  3 17:43:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src166_bgd.pi.gz
[Fri May  3 21:13:58 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  3 21:13:58 2013] rmf not generated due to insufficient counts