[Wed May  1 00:46:38 2013] Detection parameters:
  Position = (374.4, 213.9) = 16 22 13.37 -15 49 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 413.9 +/- 25.4
  Background counts = 17.9
  Rate = 0.2 +/- 0.01

[Wed May  1 00:46:38 2013] Off-axis axis estimate = 8.24'
[Thu May  2 00:00:09 2013] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Thu May  2 00:00:09 2013] Initial guess for spatial extent in simple fitting = 10.55"
[Thu May  2 00:00:09 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.052
[Thu May  2 00:00:09 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 10.55"
[Thu May  2 06:58:22 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src41.ximg exists
[Thu May  2 06:58:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src41.csv
[Thu May  2 06:58:22 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src41_1.ximg exists
[Thu May  2 06:58:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src41.csv
[Thu May  2 06:58:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:58:25 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Thu May  2 06:58:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src41.csv
[Thu May  2 06:58:25 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Thu May  2 06:58:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src41.csv
[Thu May  2 06:58:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:59:38 2013] Warning, spatial fit 41 centroid is now closest to src. 157
[Thu May  2 06:59:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:38 2013] Assessing source extent using major
[Thu May  2 06:59:38 2013] Source does appear to be extended
[Thu May  2 06:59:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 06:59:38 2013] Source is confused with source 164
[Fri May  3 05:32:07 2013] Using EEF radius (= 10.55 ")to estimate initial spatial extent for simple fitting
[Fri May  3 05:32:07 2013] Initial guess for spatial extent in simple fitting = 10.55"
[Fri May  3 05:32:07 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.052
[Fri May  3 05:32:07 2013] Giving source the simple spatial ID 41 for pass 1, mean size = 10.55"
[Fri May  3 12:59:39 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src41.ximg exists
[Fri May  3 12:59:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src41.csv
[Fri May  3 12:59:39 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src41_1.ximg exists
[Fri May  3 12:59:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src41.csv
[Fri May  3 12:59:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 12:59:41 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src41.ximg exists
[Fri May  3 12:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src41.csv
[Fri May  3 12:59:41 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src41_1.ximg exists
[Fri May  3 12:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src41.csv
[Fri May  3 12:59:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:57 2013] Spatial fit model total counts = 1133.020000, observed total counts = 900.000000
[Fri May  3 13:00:57 2013] Poor agreement between spatial fit and data for source 161
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 13:00:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:57 2013] Assessing source extent using major
[Fri May  3 13:00:57 2013] Source does appear to be extended
[Fri May  3 13:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 15:27:51 2013] XMMSAS src. selection expression = ellipse(32520.978027, 18562.924820, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 15:27:51 2013] Writing source region out to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src161_src.reg
[Fri May  3 15:27:51 2013] Extracting stamp from image fullrun_mos2_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (337, 176) - (412, 251)
[Fri May  3 15:27:51 2013] XMMSAS bgd. selection expression = annulus(32520.978027, 18562.924820, 1087.500000, 2175.000000, X, Y) && !ellipse(30253.802000, 16963.570000, 1667.504048, 590.900817, 226.701000, X, Y) && !ellipse(30027.900208, 17258.633713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34749.456380, 21972.812200, 1674.160048, 209.269606, 60.381500, X, Y) && !ellipse(31788.711000, 19529.419000, 1616.000046, 202.000006, 52.254100, X, Y) && !ellipse(30649.571800, 21243.610800, 1660.448048, 207.556006, 60.562300, X, Y) && !ellipse(31318.398000, 15958.842000, 1842.568053, 230.321607, 46.548900, X, Y) && !ellipse(31435.026640, 20011.096800, 1767.600051, 220.949606, 54.417900, X, Y) && !ellipse(30458.597200, 21595.651600, 1618.112047, 202.264006, 62.594000, X, Y) && !ellipse(31004.706400, 20650.435600, 1719.944049, 214.992806, 57.446800, X, Y) && !ellipse(35432.733920, 20915.582400, 1750.440050, 218.805606, 53.823500, X, Y) && !ellipse(29242.258400, 20480.807700, 1458.656042, 182.332005, 60.314000, X, Y) && !ellipse(30145.377289, 19095.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32747.175200, 15173.845600, 1878.184054, 234.772807, 37.048900, X, Y) && !ellipse(33872.713200, 14387.677800, 2230.760064, 278.844808, 32.538000, X, Y) && !ellipse(29542.157288, 19963.706329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29832.017456, 19604.734421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34074.528595, 17091.210220, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30694.878082, 18273.607605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33521.974518, 17532.168106, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32973.464050, 18139.127716, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 15:27:51 2013] Writing fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src161.gif
[Fri May  3 16:48:45 2013] Mean detx,y = (6303.65, 6930.90) 
[Fri May  3 16:48:46 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 16:48:58 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 16:48:58 2013] Setting source spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src161_src_b10.pi.gz
[Fri May  3 16:48:58 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src161_bgd.pi.gz
[Fri May  3 19:44:20 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  3 19:44:20 2013] rmf not generated due to insufficient counts