[Wed May  1 00:46:38 2013] Detection parameters:
  Position = (347.1, 220.0) = 16 22 21.60 -15 49 32.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 310.6 +/- 22.9
  Background counts = 20.2
  Rate = 0.1 +/- 0.008

[Wed May  1 00:46:38 2013] Off-axis axis estimate = 6.69'
[Thu May  2 00:00:09 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Thu May  2 00:00:09 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Thu May  2 00:00:09 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.193
[Thu May  2 00:00:09 2013] Giving source the simple spatial ID 83 for pass 0, mean size = 9.77"
[Thu May  2 06:58:23 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src83.ximg exists
[Thu May  2 06:58:23 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src83_1.ximg exists
[Thu May  2 06:58:23 2013] Fit fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src83 appears to have run properly
[Thu May  2 06:58:26 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src83.ximg exists
[Thu May  2 06:58:26 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src83_1.ximg exists
[Thu May  2 06:58:26 2013] Fit fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src83 appears to have run properly
[Thu May  2 06:59:38 2013] Source 159 is offset by 1.240585 and -1.748879 pixels which is larger than
2 X fitted extent = 8.986253 x 1.123283, not incorporating fit results
[Thu May  2 06:59:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:38 2013] Assessing source extent using major
[Thu May  2 06:59:38 2013] Source does appear to be extended
[Thu May  2 06:59:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 06:59:38 2013] Source is confused with source 156
[Fri May  3 05:32:07 2013] Using EEF radius (= 9.77 ")to estimate initial spatial extent for simple fitting
[Fri May  3 05:32:07 2013] Initial guess for spatial extent in simple fitting = 9.77"
[Fri May  3 05:32:07 2013] source mask rpix=2.2, npix_max = 30, mask sum = 36, frac = 1.193
[Fri May  3 05:32:07 2013] Giving source the simple spatial ID 83 for pass 1, mean size = 9.77"
[Fri May  3 12:59:40 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src83.ximg exists
[Fri May  3 12:59:40 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src83_1.ximg exists
[Fri May  3 12:59:40 2013] Fit fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src83 appears to have run properly
[Fri May  3 12:59:42 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src83.ximg exists
[Fri May  3 12:59:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src83.csv
[Fri May  3 12:59:42 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src83_1.ximg exists
[Fri May  3 12:59:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src83.csv
[Fri May  3 12:59:42 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src83_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src83.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:57 2013] Source 159 is offset by 1.187944 and -1.675544 pixels which is larger than
2 X fitted extent = 8.986253 x 1.123283, not incorporating fit results
[Fri May  3 13:00:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:57 2013] Assessing source extent using major
[Fri May  3 13:00:57 2013] Source does appear to be extended
[Fri May  3 13:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 15:27:55 2013] XMMSAS src. selection expression = ellipse(30145.377289, 19095.055084, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 15:27:55 2013] Writing source region out to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src159_src.reg
[Fri May  3 15:27:55 2013] Extracting stamp from image fullrun_mos2_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (310, 183) - (385, 258)
[Fri May  3 15:27:55 2013] XMMSAS bgd. selection expression = annulus(30145.377289, 19095.055084, 1087.500000, 2175.000000, X, Y) && !ellipse(30253.802000, 16963.570000, 1667.504048, 590.900817, 226.701000, X, Y) && !ellipse(29435.350769, 17948.722290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30027.900208, 17258.633713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28414.429200, 19493.211000, 1731.760050, 240.056807, 57.616600, X, Y) && !ellipse(28918.504181, 18745.314713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28008.426200, 20193.685200, 1432.160041, 277.905608, 62.261000, X, Y) && !ellipse(32520.978027, 18562.924820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31788.711000, 19529.419000, 1616.000046, 202.000006, 52.254100, X, Y) && !ellipse(30649.571800, 21243.610800, 1660.448048, 207.556006, 60.562300, X, Y) && !ellipse(31318.398000, 15958.842000, 1842.568053, 230.321607, 46.548900, X, Y) && !ellipse(31435.026640, 20011.096800, 1767.600051, 220.949606, 54.417900, X, Y) && !ellipse(27338.605103, 21527.839844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30458.597200, 21595.651600, 1618.112047, 202.264006, 62.594000, X, Y) && !ellipse(31004.706400, 20650.435600, 1719.944049, 214.992806, 57.446800, X, Y) && !ellipse(29242.258400, 20480.807700, 1458.656042, 182.332005, 60.314000, X, Y) && !ellipse(27948.141418, 17640.967224, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28512.584717, 21953.928238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32747.175200, 15173.845600, 1878.184054, 234.772807, 37.048900, X, Y) && !ellipse(28047.261627, 16965.845047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27358.754120, 18337.904449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29542.157288, 19963.706329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29832.017456, 19604.734421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28576.446136, 17006.863922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30694.878082, 18273.607605, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32973.464050, 18139.127716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28319.460541, 16328.942017, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 15:27:55 2013] Writing fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src159.gif
[Fri May  3 17:48:12 2013] Mean detx,y = (4007.09, 5803.46) 
[Fri May  3 17:48:13 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 17:48:20 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 17:48:20 2013] Setting source spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src159_src_b10.pi.gz
[Fri May  3 17:48:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src159_bgd.pi.gz
[Fri May  3 21:18:25 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  3 21:18:25 2013] rmf not generated due to insufficient counts