[Wed May  1 00:46:37 2013] Detection parameters:
  Position = (314.8, 248.0) = 16 22 31.33 -15 47 29.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 460.9 +/- 28.8
  Background counts = 18.7
  Rate = 0.1 +/- 0.009

[Wed May  1 00:46:38 2013] Off-axis axis estimate = 3.84'
[Thu May  2 00:00:09 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Thu May  2 00:00:09 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Thu May  2 00:00:09 2013] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.683
[Thu May  2 00:00:09 2013] Giving source the simple spatial ID 62 for pass 0, mean size = 8.35"
[Thu May  2 06:58:23 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src62.ximg exists
[Thu May  2 06:58:23 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src62_1.ximg exists
[Thu May  2 06:58:23 2013] Fit fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src62 appears to have run properly
[Thu May  2 06:58:25 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Thu May  2 06:58:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src62.csv
[Thu May  2 06:58:25 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Thu May  2 06:58:25 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src62.csv
[Thu May  2 06:58:25 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:59:38 2013] Source 146 is offset by -1.111730 and 2.782573 pixels which is larger than
2 X fitted extent = 7.678621 x 2.525747, not incorporating fit results
[Thu May  2 06:59:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:38 2013] Assessing source extent using major
[Thu May  2 06:59:38 2013] Source does appear to be extended
[Thu May  2 06:59:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 05:32:07 2013] Using EEF radius (= 8.35 ")to estimate initial spatial extent for simple fitting
[Fri May  3 05:32:07 2013] Initial guess for spatial extent in simple fitting = 8.35"
[Fri May  3 05:32:07 2013] source mask rpix=1.9, npix_max = 23, mask sum = 16, frac = 0.683
[Fri May  3 05:32:07 2013] Giving source the simple spatial ID 62 for pass 1, mean size = 8.35"
[Fri May  3 12:59:39 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src62.ximg exists
[Fri May  3 12:59:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src62.csv
[Fri May  3 12:59:39 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src62_1.ximg exists
[Fri May  3 12:59:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src62.csv
[Fri May  3 12:59:39 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 12:59:41 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src62.ximg exists
[Fri May  3 12:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src62.csv
[Fri May  3 12:59:41 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src62_1.ximg exists
[Fri May  3 12:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src62.csv
[Fri May  3 12:59:41 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:57 2013] Warning: source 62 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 146 at 10.131055 pixels away
[Fri May  3 13:00:57 2013] Source 146 is offset by -5.479436 and 1.730159 pixels which is larger than
2 X fitted extent = 0.965784 x 0.965784, not incorporating fit results
[Fri May  3 13:00:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:57 2013] Assessing source extent using major
[Fri May  3 13:00:57 2013] Source does appear to be extended
[Fri May  3 13:00:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 15:27:54 2013] XMMSAS src. selection expression = ellipse(27338.605103, 21527.839844, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 15:27:54 2013] Writing source region out to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src146_src.reg
[Fri May  3 15:27:54 2013] Extracting stamp from image fullrun_mos2_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (277, 211) - (352, 286)
[Fri May  3 15:27:54 2013] XMMSAS bgd. selection expression = annulus(27338.605103, 21527.839844, 1087.500000, 2175.000000, X, Y) && !ellipse(28414.429200, 19493.211000, 1731.760050, 240.056807, 57.616600, X, Y) && !ellipse(28918.504181, 18745.314713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28008.426200, 20193.685200, 1432.160041, 277.905608, 62.261000, X, Y) && !ellipse(30649.571800, 21243.610800, 1660.448048, 207.556006, 60.562300, X, Y) && !ellipse(30458.597200, 21595.651600, 1618.112047, 202.264006, 62.594000, X, Y) && !ellipse(31004.706400, 20650.435600, 1719.944049, 214.992806, 57.446800, X, Y) && !ellipse(29242.258400, 20480.807700, 1458.656042, 182.332005, 60.314000, X, Y) && !ellipse(30145.377289, 19095.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28512.584717, 21953.928238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29542.157288, 19963.706329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29832.017456, 19604.734421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.637970, 19334.802902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25538.691711, 19969.503586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25562.852478, 20386.657806, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 15:27:54 2013] Writing fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src146.gif
[Fri May  3 17:22:29 2013] Mean detx,y = (1771.64, 3127.54) 
[Fri May  3 17:22:30 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 17:22:37 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 17:22:37 2013] Setting source spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src146_src_b10.pi.gz
[Fri May  3 17:22:37 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src146_bgd.pi.gz
[Fri May  3 20:40:55 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  3 20:40:55 2013] rmf not generated due to insufficient counts