[Wed May  1 00:46:33 2013] Detection parameters:
  Position = (328.2, 448.0) = 16 22 27.31 -15 32 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1678.7 +/- 49.7
  Background counts = 18.9
  Rate = 0.4 +/- 0.01

[Wed May  1 00:46:38 2013] Off-axis axis estimate = 11.05'
[Thu May  2 00:00:09 2013] Using EEF radius (= 11.96 ")to estimate initial spatial extent for simple fitting
[Thu May  2 00:00:09 2013] Initial guess for spatial extent in simple fitting = 11.96"
[Thu May  2 00:00:09 2013] source mask rpix=2.7, npix_max = 42, mask sum = 36, frac = 0.853
[Thu May  2 00:00:09 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 11.96"
[Thu May  2 06:58:22 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src4.ximg exists
[Thu May  2 06:58:22 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src4_1.ximg exists
[Thu May  2 06:58:22 2013] Fit fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_src4 appears to have run properly
[Thu May  2 06:58:24 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Thu May  2 06:58:24 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Thu May  2 06:58:24 2013] Fit fullrun_mos2_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Thu May  2 06:59:37 2013] Spatial fit model total counts = 3650.140000, observed total counts = 3885.000000
[Thu May  2 06:59:37 2013] Offset between fit and detection position for source 13 = 1.377329 pixels
[Thu May  2 06:59:37 2013] 3316.850000 total counts/ 1189.620000 bgd. counts: snr = 61.675165
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.377329 pixels
  Position = (329.3, 448.8) = 16 22 26.98 -15 32 57.2
  Extent = 23.9 (23.7-47.8)" x 3.0 (3.0-3.0)", rotation angle = 315 (315-315) degrees
  Source counts = 2127.2 +/- 57.6
  Background counts = 1189.6
  Rate = 0.5 +/- 0.01
[Thu May  2 06:59:38 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:38 2013] Assessing source extent using major axis lower bound
[Thu May  2 06:59:38 2013] Source does appear to be extended
[Thu May  2 06:59:38 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 7.93
[Thu May  2 06:59:38 2013] Source is asymmetric
[Fri May  3 05:32:06 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May  3 05:32:06 2013] Initial guess for spatial extent in simple fitting = 13.45"
[Fri May  3 05:32:06 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.950
[Fri May  3 05:32:06 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 13.45"
[Fri May  3 12:59:38 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src4.ximg exists
[Fri May  3 12:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src4.csv
[Fri May  3 12:59:38 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri May  3 12:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src4.csv
[Fri May  3 12:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 12:59:40 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri May  3 12:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May  3 12:59:40 2013] fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri May  3 12:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src4.csv
[Fri May  3 12:59:40 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:56 2013] Spatial fit model total counts = 3349.730000, observed total counts = 3928.000000
[Fri May  3 13:00:56 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 13:00:57 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:57 2013] Assessing source extent using major axis lower bound
[Fri May  3 13:00:57 2013] Source does appear to be extended
[Fri May  3 13:00:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 7.93
[Fri May  3 13:00:57 2013] Source is asymmetric
[Fri May  3 15:27:46 2013] Counts = 2127.230000, rescaling region sizes by 2.000000
[Fri May  3 15:27:46 2013] XMMSAS src. selection expression = ellipse(28597.974000, 38996.535000, 2869.224083, 358.653610, 314.530000, X, Y)
[Fri May  3 15:27:46 2013] Writing source region out to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src13_src.reg
[Fri May  3 15:27:46 2013] Extracting stamp from image fullrun_mos2_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (164, 284) - (494, 595)
[Fri May  3 15:27:46 2013] XMMSAS bgd. selection expression = annulus(28597.974000, 38996.535000, 9564.080275, 19128.160550, X, Y) && !ellipse(41711.470795, 27289.964966, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28578.291000, 35379.616040, 1675.736048, 209.467206, 121.311600, X, Y) && !ellipse(40547.065200, 23407.776200, 2009.368058, 251.171207, 53.399100, X, Y) && !ellipse(33311.570400, 29127.385400, 1567.352045, 484.754414, 90.000000, X, Y) && !ellipse(33239.929800, 28360.220200, 1541.928044, 396.308011, 92.245890, X, Y) && !ellipse(31910.386820, 38347.746800, 1953.544056, 244.192807, 135.785000, X, Y) && !ellipse(33213.714996, 27530.561066, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33386.137909, 29784.415436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33237.761400, 26671.247600, 1520.696044, 190.087205, 84.488450, X, Y) && !ellipse(27702.035000, 33704.058400, 1549.512045, 632.285618, 90.000000, X, Y) && !ellipse(34230.360229, 23011.496765, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27294.603200, 30352.989200, 1529.696044, 191.212006, 103.447500, X, Y) && !ellipse(34749.456380, 21972.812200, 1674.160048, 209.269606, 60.381500, X, Y) && !ellipse(28164.459400, 34632.619000, 1813.968052, 226.746407, 116.804400, X, Y) && !ellipse(27751.985199, 32047.174774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29000.921380, 36033.714600, 1735.392050, 216.923206, 304.616400, X, Y) && !ellipse(26909.754220, 28364.462800, 1352.032039, 169.004005, 98.261730, X, Y) && !ellipse(27104.158920, 29511.740860, 1436.544041, 179.568005, 101.391100, X, Y) && !ellipse(27359.709930, 32754.567505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26941.978241, 37614.343750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28414.429200, 19493.211000, 1731.760050, 240.056807, 57.616600, X, Y) && !ellipse(34580.150200, 22502.354000, 1576.456045, 986.664028, 90.000000, X, Y) && !ellipse(26723.300200, 25390.285000, 1260.640036, 157.580005, 90.491626, X, Y) && !ellipse(27384.539764, 30660.638824, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26772.249800, 26997.855800, 1120.776032, 140.096804, 94.210460, X, Y) && !ellipse(29289.379913, 36403.668976, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33263.051060, 26434.708600, 1521.448044, 190.180805, 82.465480, X, Y) && !ellipse(29385.276917, 32308.142914, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28008.426200, 20193.685200, 1432.160041, 277.905608, 62.261000, X, Y) && !ellipse(41074.295624, 22740.192596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25480.470000, 35961.024000, 1722.240050, 1227.032035, 141.063100, X, Y) && !ellipse(29190.480072, 31312.990143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33663.271400, 34891.155800, 1814.624052, 226.828807, 124.352200, X, Y) && !ellipse(27014.353480, 29050.220200, 1403.432040, 175.428805, 99.550900, X, Y) && !ellipse(41608.958400, 22226.288400, 426.314412, 426.314412, 0.000000, X, Y) && !ellipse(26842.132360, 27800.035520, 1297.544037, 162.192805, 96.429700, X, Y) && !ellipse(26772.636400, 27019.968400, 1260.872036, 157.608805, 94.246540, X, Y) && !ellipse(28912.361000, 29939.840000, 1540.960044, 192.620006, 98.673460, X, Y) && !ellipse(34036.081116, 35432.592010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34139.456300, 32027.523200, 1714.528049, 214.316006, 109.975200, X, Y) && !ellipse(33108.122000, 33989.754200, 2561.792074, 320.224009, 119.932700, X, Y) && !ellipse(40433.987518, 23537.524445, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31788.711000, 19529.419000, 1616.000046, 202.000006, 52.254100, X, Y) && !ellipse(28802.029000, 27367.440060, 1396.360040, 174.544805, 85.718270, X, Y) && !ellipse(30649.571800, 21243.610800, 1660.448048, 207.556006, 60.562300, X, Y) && !ellipse(26787.886000, 25615.675662, 1311.232038, 163.904005, 90.209324, X, Y) && !ellipse(31435.026640, 20011.096800, 1767.600051, 220.949606, 54.417900, X, Y) && !ellipse(28861.551600, 29500.470800, 1330.320038, 166.290405, 95.579860, X, Y) && !ellipse(33421.805573, 38574.174011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33339.443909, 34410.525208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27338.605103, 21527.839844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30458.597200, 21595.651600, 1618.112047, 202.264006, 62.594000, X, Y) && !ellipse(32967.936279, 38144.338043, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31004.706400, 20650.435600, 1719.944049, 214.992806, 57.446800, X, Y) && !ellipse(37911.600830, 23794.687927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40380.727631, 31164.680206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34040.044600, 31741.287380, 1904.760055, 238.095207, 108.623500, X, Y) && !ellipse(38523.534637, 23019.360962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28767.844700, 28070.775800, 1425.368041, 178.171205, 89.106009, X, Y) && !ellipse(32649.489410, 33189.965759, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35432.733920, 20915.582400, 1750.440050, 218.805606, 53.823500, X, Y) && !ellipse(37088.207214, 29012.786926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29242.258400, 20480.807700, 1458.656042, 182.332005, 60.314000, X, Y) && !ellipse(37151.858887, 29795.019623, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27338.806885, 27531.423950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30145.377289, 19095.055084, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37268.436440, 30505.198400, 1654.944048, 345.388810, 90.000000, X, Y) && !ellipse(28512.584717, 21953.928238, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37600.070312, 24211.092102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36318.108002, 33770.312683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40546.965400, 30003.650200, 2038.776059, 254.846407, 101.256200, X, Y) && !ellipse(27468.753600, 25535.501600, 1140.424033, 170.805605, 80.076930, X, Y) && !ellipse(27362.787109, 28403.986053, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35802.148193, 20480.341843, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41449.496399, 21453.799042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29542.157288, 19963.706329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29832.017456, 19604.734421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37081.237762, 28143.647156, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37193.473816, 27090.776703, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30656.412018, 37116.924011, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34781.276154, 33449.813477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31116.302917, 37627.361359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36767.657562, 32927.800201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30149.827118, 37537.501892, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35209.261566, 34149.583618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38789.212799, 32321.702148, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40685.312592, 20888.065399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38108.771271, 24303.096832, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26528.637970, 19334.802902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39805.534119, 31788.404999, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37127.068878, 27527.855591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38605.914886, 31884.591400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38344.572388, 31096.360992, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39175.970917, 22649.544586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26115.783569, 32060.601257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30106.959015, 34646.626343, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24353.077759, 29881.459412, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40946.705536, 21915.422348, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39839.582214, 21935.952362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26764.239960, 33800.224243, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40711.379669, 30593.264801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24222.232605, 29371.776093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38554.500244, 23406.188110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27178.182922, 34662.991943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25724.039307, 29624.317169, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29774.549347, 34064.094330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28933.136047, 26336.759003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36495.732117, 26599.524597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25964.834534, 31571.542206, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38085.385773, 30015.745483, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32320.398529, 32307.962372, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38441.358826, 31445.101746, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28969.467468, 25939.882568, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26547.470093, 33276.878143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26255.953186, 32566.567535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38041.676025, 29623.441010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25883.696838, 30642.804993, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23942.267731, 28247.264984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39344.435181, 24232.117279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38001.008942, 28491.686981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39274.297272, 30030.149017, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38064.841156, 27710.720734, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36595.558563, 20082.894577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25538.691711, 19969.503586, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25402.825897, 36738.027435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29319.296783, 33146.117950, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25562.852478, 20386.657806, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39624.532806, 23707.661377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39038.570496, 24632.283295, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36062.718079, 35692.994629, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39240.881073, 29367.305023, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25009.639954, 37534.873413, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 15:27:46 2013] Writing fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src13.gif
[Fri May  3 15:35:11 2013] Mean detx,y = (6466.58, -13669.23) 
[Fri May  3 15:35:12 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 15:38:07 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 15:38:07 2013] Setting source spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri May  3 15:38:07 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0153950901_pi300-10000_pass1_cl_src13_bgd.pi.gz