[Wed May  1 00:46:25 2013] Detection parameters:
  Position = (471.2, 356.7) = 16 21 44.24 -15 39 40.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2715.7 +/- 59.8
  Background counts = 7.9
  Rate = 0.6 +/- 0.01

[Wed May  1 00:46:32 2013] Off-axis axis estimate = 13.22'
[Wed May  1 12:30:07 2013] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Wed May  1 12:30:07 2013] Initial guess for spatial extent in simple fitting = 13.04"
[Wed May  1 12:30:07 2013] source mask rpix=3.0, npix_max = 48, mask sum = 39, frac = 0.797
[Wed May  1 12:30:07 2013] Giving source the simple spatial ID 45 for pass 0, mean size = 13.04"
[Thu May  2 00:00:07 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src45.ximg exists
[Thu May  2 00:00:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src45.csv
[Thu May  2 00:00:07 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src45_1.ximg exists
[Thu May  2 00:00:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src45.csv
[Thu May  2 00:00:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 00:00:08 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src45.ximg exists
[Thu May  2 00:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src45.csv
[Thu May  2 00:00:08 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src45_1.ximg exists
[Thu May  2 00:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src45.csv
[Thu May  2 00:00:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src45_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src45.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:59:22 2013] Source 4 is offset by 1.176437 and 2.666183 pixels which is larger than
2 X fitted extent = 1.473908 x 2.416566, not incorporating fit results
[Thu May  2 06:59:22 2013] Spatial fit model total counts = 3610.350000, observed total counts = 5337.000000
[Thu May  2 06:59:22 2013] Poor agreement between spatial fit and data for source 4
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu May  2 06:59:22 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:22 2013] Assessing source extent using major
[Thu May  2 06:59:22 2013] Source does appear to be extended
[Thu May  2 06:59:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 17:48:59 2013] Using EEF radius (= 13.04 ")to estimate initial spatial extent for simple fitting
[Thu May  2 17:48:59 2013] Initial guess for spatial extent in simple fitting = 13.04"
[Thu May  2 17:48:59 2013] source mask rpix=3.0, npix_max = 48, mask sum = 39, frac = 0.797
[Thu May  2 17:48:59 2013] Giving source the simple spatial ID 44 for pass 1, mean size = 13.04"
[Fri May  3 05:32:02 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src44.ximg exists
[Fri May  3 05:32:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src44.csv
[Fri May  3 05:32:02 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src44_1.ximg exists
[Fri May  3 05:32:02 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src44.csv
[Fri May  3 05:32:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 05:32:05 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src44.ximg exists
[Fri May  3 05:32:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri May  3 05:32:05 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src44_1.ximg exists
[Fri May  3 05:32:05 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src44.csv
[Fri May  3 05:32:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src44_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src44.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:38 2013] Warning: source 44 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 14.281282 pixels away
[Fri May  3 13:00:38 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:38 2013] Assessing source extent using major
[Fri May  3 13:00:38 2013] Source does appear to be extended
[Fri May  3 13:00:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 13:00:39 2013] Source is confused with source 50
[Fri May  3 13:07:05 2013] Counts = 2715.698242, rescaling region sizes by 2.000000
[Fri May  3 13:07:05 2013] XMMSAS src. selection expression = ellipse(40943.092041, 30984.955963, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May  3 13:07:05 2013] Writing source region out to fullrun_mos1_xmm0153950901_pi300-10000_pass1_cl_src4_src.reg
[Fri May  3 13:07:05 2013] Extracting stamp from image fullrun_mos1_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (396, 282) - (546, 432)
[Fri May  3 13:07:05 2013] XMMSAS bgd. selection expression = annulus(40943.092041, 30984.955963, 4350.000000, 8700.000000, X, Y) && !ellipse(37073.999600, 33544.846900, 5779.776166, 1375.963240, 131.413400, X, Y) && !ellipse(37269.567800, 33772.765600, 7188.360207, 1370.714439, 129.040600, X, Y) && !ellipse(34541.635864, 27790.514984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34119.433000, 26706.960200, 1578.832045, 197.354406, 85.279410, X, Y) && !ellipse(38163.431400, 30466.814200, 1896.680055, 528.996815, 99.250700, X, Y) && !ellipse(41047.762800, 21555.777800, 2082.152060, 830.072024, 43.809000, X, Y) && !ellipse(35187.381470, 31027.351471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31185.886954, 31836.302000, 1741.176050, 217.647206, 114.556000, X, Y) && !ellipse(34163.381000, 28959.033000, 1614.304046, 201.788806, 95.996130, X, Y) && !ellipse(31388.694400, 32263.752000, 1584.864046, 198.108806, 116.426200, X, Y) && !ellipse(40435.487610, 28312.005219, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39899.073456, 32662.860138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38184.941800, 30552.336200, 2416.016070, 538.043215, 99.848280, X, Y) && !ellipse(42057.701258, 23422.120600, 2123.360061, 265.420008, 52.616500, X, Y) && !ellipse(40525.308160, 21959.202400, 2043.808059, 255.816007, 52.589500, X, Y) && !ellipse(42577.713928, 22726.896210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40515.454437, 29183.423004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41476.785200, 24316.384600, 2330.480067, 291.309608, 60.718900, X, Y) && !ellipse(34588.129200, 26899.590200, 322.644009, 322.644009, 0.000000, X, Y) && !ellipse(35756.010000, 23156.576000, 219.306406, 219.306406, 0.000000, X, Y) && !ellipse(37159.049400, 20852.463200, 1846.208053, 230.776007, 49.813200, X, Y) && !ellipse(36522.659424, 21699.579086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35881.820312, 32041.623108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40589.880200, 30165.040000, 253.248007, 253.248007, 0.000000, X, Y) && !ellipse(36748.485596, 36142.963684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36439.145477, 32839.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41442.172000, 24391.672000, 1218.536035, 1218.536035, 0.000000, X, Y) && !ellipse(40438.732800, 27713.656100, 2004.576058, 250.572007, 85.983650, X, Y) && !ellipse(34104.753448, 27702.840607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35008.313019, 35094.407654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35028.286804, 23181.123932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33527.083800, 32768.506800, 1698.600049, 215.420806, 116.474600, X, Y) && !ellipse(33793.592600, 33255.287200, 1965.984057, 245.748007, 300.011300, X, Y) && !ellipse(34286.452000, 38349.292000, 1998.856058, 1359.216039, 324.607200, X, Y) && !ellipse(39909.932526, 29792.996490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34459.912000, 29260.484000, 2504.568072, 903.768026, 109.430800, X, Y) && !ellipse(37856.596588, 34480.660461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38784.707214, 24566.767792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34619.600000, 34535.937800, 2071.344060, 258.917607, 305.588500, X, Y) && !ellipse(36159.629303, 22226.194855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35458.582092, 32128.617798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37966.532420, 27921.962200, 1843.688053, 230.460807, 88.524000, X, Y) && !ellipse(34200.291200, 33918.967800, 2018.064058, 252.257607, 122.925400, X, Y) && !ellipse(34835.328000, 30168.267200, 1685.272048, 329.181609, 105.481100, X, Y) && !ellipse(35254.318440, 22686.073400, 1689.800049, 211.225606, 63.547100, X, Y) && !ellipse(41770.211600, 23826.090800, 2096.200060, 262.024808, 56.335200, X, Y) && !ellipse(35921.101471, 35012.226532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39355.772156, 23534.149902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35691.536620, 21887.775800, 1735.112050, 216.889606, 59.108500, X, Y) && !ellipse(38756.375397, 27278.710297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33490.756683, 37363.809875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37997.451202, 28574.669922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38081.350128, 29358.588562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39743.209961, 23879.765686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40125.435944, 30673.382965, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32153.575073, 33623.871887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39676.268707, 31702.857300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37952.408000, 27549.662000, 1889.440054, 236.180007, 82.262000, X, Y) && !ellipse(31792.347717, 33014.840027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38148.307312, 26487.089417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31484.528931, 36234.479889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38867.464478, 29093.587433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39043.861969, 24051.562012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40599.971985, 31966.339752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32287.500061, 37171.840637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33099.593872, 36919.103088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35397.986359, 34310.693451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35994.667023, 21439.522949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39473.870514, 24397.050354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40518.451965, 27083.316071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39044.602722, 29964.065338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38781.316742, 28312.071594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40381.887878, 31535.707275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37356.699707, 35794.793762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38777.995300, 27704.316803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40455.469360, 28662.113312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40945.478912, 21950.367844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40022.816406, 23448.055267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40636.001040, 29993.623000, 2051.680059, 256.460007, 104.272800, X, Y) && !ellipse(32380.630524, 36116.801025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33353.011108, 38148.726807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39180.248000, 30595.600000, 249.585607, 249.585607, 0.000000, X, Y) && !ellipse(40366.610840, 22931.280365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40246.914154, 31096.533569, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32963.603271, 37696.708069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38716.507477, 26755.735901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38293.293152, 34982.654816, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 13:07:05 2013] Writing fullrun_mos1_xmm0153950901_pi300-10000_pass1_cl_src4.gif
[Fri May  3 15:02:08 2013] Mean detx,y = (-3408.18, -16663.84) 
[Fri May  3 15:02:09 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 15:02:58 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 15:02:58 2013] Setting source spectrum file to fullrun_mos1_xmm0153950901_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri May  3 15:02:58 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153950901_pi300-10000_pass1_cl_src4_bgd.pi.gz