[Wed May  1 00:46:31 2013] Detection parameters:
  Position = (376.2, 212.0) = 16 22 12.82 -15 50 6.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1938.3 +/- 53.1
  Background counts = 23.4
  Rate = 0.8 +/- 0.02

[Wed May  1 00:46:32 2013] Off-axis axis estimate = 8.43'
[Wed May  1 12:30:06 2013] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Wed May  1 12:30:06 2013] Initial guess for spatial extent in simple fitting = 10.64"
[Wed May  1 12:30:06 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.037
[Wed May  1 12:30:06 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 10.64"
[Thu May  2 00:00:06 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src13.ximg exists
[Thu May  2 00:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src13.csv
[Thu May  2 00:00:06 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src13_1.ximg exists
[Thu May  2 00:00:06 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src13.csv
[Thu May  2 00:00:06 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 00:00:08 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Thu May  2 00:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu May  2 00:00:08 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Thu May  2 00:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src13.csv
[Thu May  2 00:00:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:59:21 2013] Warning, spatial fit 13 centroid is now closest to src. 172
[Thu May  2 06:59:22 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:22 2013] Assessing source extent using major
[Thu May  2 06:59:22 2013] Source does appear to be extended
[Thu May  2 06:59:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 17:48:59 2013] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Thu May  2 17:48:59 2013] Initial guess for spatial extent in simple fitting = 10.64"
[Thu May  2 17:48:59 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.037
[Thu May  2 17:48:59 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 10.64"
[Fri May  3 05:32:01 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src13.ximg exists
[Fri May  3 05:32:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src13.csv
[Fri May  3 05:32:01 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src13_1.ximg exists
[Fri May  3 05:32:01 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src13.csv
[Fri May  3 05:32:01 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 05:32:04 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Fri May  3 05:32:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri May  3 05:32:04 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Fri May  3 05:32:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src13.csv
[Fri May  3 05:32:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:38 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 170 at 14.413611 pixels away
[Fri May  3 13:00:38 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:38 2013] Assessing source extent using major
[Fri May  3 13:00:38 2013] Source does appear to be extended
[Fri May  3 13:00:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 13:06:58 2013] Counts = 1938.272827, rescaling region sizes by 2.000000
[Fri May  3 13:06:58 2013] XMMSAS src. selection expression = ellipse(32678.891205, 18399.120132, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May  3 13:06:58 2013] Writing source region out to fullrun_mos1_xmm0153950901_pi300-10000_pass1_cl_src170_src.reg
[Fri May  3 13:06:58 2013] Extracting stamp from image fullrun_mos1_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (301, 137) - (451, 287)
[Fri May  3 13:06:58 2013] XMMSAS bgd. selection expression = annulus(32678.891205, 18399.120132, 4350.000000, 8700.000000, X, Y) && !ellipse(37269.567800, 33772.765600, 7188.360207, 1370.714439, 129.040600, X, Y) && !ellipse(34541.635864, 27790.514984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34119.433000, 26706.960200, 1578.832045, 197.354406, 85.279410, X, Y) && !ellipse(41047.762800, 21555.777800, 2082.152060, 830.072024, 43.809000, X, Y) && !ellipse(31193.543400, 15431.326800, 2036.504059, 254.562407, 41.754100, X, Y) && !ellipse(39940.474180, 16921.758600, 667.004819, 667.004819, 0.000000, X, Y) && !ellipse(42057.701258, 23422.120600, 2123.360061, 265.420008, 52.616500, X, Y) && !ellipse(40525.308160, 21959.202400, 2043.808059, 255.816007, 52.589500, X, Y) && !ellipse(30722.779785, 15862.871536, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29052.108400, 26838.045400, 1427.808041, 180.634405, 89.861004, X, Y) && !ellipse(31370.495422, 19438.473831, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41476.785200, 24316.384600, 2330.480067, 291.309608, 60.718900, X, Y) && !ellipse(31963.400635, 17870.073685, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34588.129200, 26899.590200, 322.644009, 322.644009, 0.000000, X, Y) && !ellipse(29102.176260, 28155.842420, 1284.456037, 170.062405, 95.717410, X, Y) && !ellipse(30885.291800, 20198.982800, 1730.024050, 216.252806, 58.984500, X, Y) && !ellipse(35756.010000, 23156.576000, 219.306406, 219.306406, 0.000000, X, Y) && !ellipse(31410.485474, 18453.341141, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37159.049400, 20852.463200, 1846.208053, 230.776007, 49.813200, X, Y) && !ellipse(36522.659424, 21699.579086, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29082.862500, 25962.368740, 1438.112041, 197.640806, 85.653420, X, Y) && !ellipse(30043.090600, 21869.167000, 1556.488045, 194.560806, 67.566000, X, Y) && !ellipse(39119.315247, 18997.887650, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37682.824000, 20336.124000, 1495.328043, 1495.328043, 0.000000, X, Y) && !ellipse(29929.334000, 16616.048000, 816.352023, 407.780012, 90.000000, X, Y) && !ellipse(41442.172000, 24391.672000, 1218.536035, 1218.536035, 0.000000, X, Y) && !ellipse(40438.732800, 27713.656100, 2004.576058, 250.572007, 85.983650, X, Y) && !ellipse(34104.753448, 27702.840607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35028.286804, 23181.123932, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30229.768220, 21449.968200, 1632.976047, 204.121606, 65.238600, X, Y) && !ellipse(34459.912000, 29260.484000, 2504.568072, 903.768026, 109.430800, X, Y) && !ellipse(29058.650600, 26366.957400, 1240.512036, 155.416804, 88.369740, X, Y) && !ellipse(38336.197800, 16582.736000, 2068.056060, 258.507207, 31.511900, X, Y) && !ellipse(38784.707214, 24566.767792, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30592.007880, 20714.922000, 1492.480043, 186.608005, 61.647400, X, Y) && !ellipse(36159.629303, 22226.194855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30669.940000, 19511.396000, 1587.744046, 198.468006, 53.410900, X, Y) && !ellipse(29795.930298, 20850.544525, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38751.616000, 19272.536000, 2022.320058, 252.789607, 39.361900, X, Y) && !ellipse(27993.468800, 27306.651400, 1541.880044, 355.929610, 89.974847, X, Y) && !ellipse(37966.532420, 27921.962200, 1843.688053, 230.460807, 88.524000, X, Y) && !ellipse(30926.261230, 19189.161270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29269.281342, 21791.744446, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37117.967438, 17436.125076, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35254.318440, 22686.073400, 1689.800049, 211.225606, 63.547100, X, Y) && !ellipse(34179.666400, 11150.460720, 1422.224041, 785.140023, 0.000000, X, Y) && !ellipse(37633.655800, 17050.593400, 2277.200066, 284.649608, 35.195800, X, Y) && !ellipse(41770.211600, 23826.090800, 2096.200060, 262.024808, 56.335200, X, Y) && !ellipse(29442.511383, 17188.400223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38879.126600, 16265.921466, 2113.280061, 264.159208, 29.149700, X, Y) && !ellipse(27995.362600, 27610.236600, 1213.424035, 376.036011, 91.880630, X, Y) && !ellipse(39355.772156, 23534.149902, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28183.416840, 25279.109497, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35691.536620, 21887.775800, 1735.112050, 216.889606, 59.108500, X, Y) && !ellipse(41656.296631, 21342.409943, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38756.375397, 27278.710297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28087.705000, 25813.012200, 1174.032034, 345.119210, 82.201090, X, Y) && !ellipse(36348.412506, 20923.549866, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39579.009674, 15954.974503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35117.174530, 16046.703110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35815.842834, 15527.526733, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39743.209961, 23879.765686, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29052.684052, 17712.318481, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37466.769257, 18744.194290, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37952.408000, 27549.662000, 1889.440054, 236.180007, 82.262000, X, Y) && !ellipse(38148.307312, 26487.089417, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36305.512543, 13884.400787, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39043.861969, 24051.562012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38163.286987, 18132.537933, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35994.667023, 21439.522949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34008.766174, 17012.669144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39473.870514, 24397.050354, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31793.059265, 14912.055099, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32589.071564, 14308.022659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33201.714264, 13888.938232, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40518.451965, 27083.316071, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35249.541016, 14474.834167, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39228.232513, 17349.780869, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33166.166077, 16753.907333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37050.168610, 13559.868591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38642.716248, 17783.657791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34589.516663, 16480.780487, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35851.120209, 14124.569427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32763.634430, 17090.049973, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37991.158783, 14067.859329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38777.995300, 27704.316803, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40945.478912, 21950.367844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35205.517975, 13266.373688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40022.816406, 23448.055267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28483.220093, 17014.445358, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34725.735596, 13516.680557, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33178.230530, 14475.009399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33815.923431, 14125.642059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36656.491486, 13709.695877, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40366.610840, 22931.280365, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32672.728882, 11880.891785, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28995.510651, 16412.307281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30300.972626, 14999.158646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32156.936340, 12215.222366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38716.507477, 26755.735901, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25650.104706, 26573.130951, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27177.317383, 19446.673889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27635.992279, 18501.131668, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29829.306671, 15435.203400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25728.632507, 25445.901093, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27006.771576, 20036.220490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26556.396301, 21258.132675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(41109.989838, 18736.938095, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25780.538330, 24929.078400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32026.611572, 9701.358986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25876.268066, 19790.160339, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30939.695679, 10205.445503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33802.135864, 16324.409882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24941.604828, 25268.099091, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26048.013947, 20925.972580, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28328.869965, 16326.259109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30391.225037, 10294.764671, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26314.695709, 19860.936783, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25047.973267, 24767.299500, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 13:06:58 2013] Writing fullrun_mos1_xmm0153950901_pi300-10000_pass1_cl_src170.gif
[Fri May  3 13:50:00 2013] Mean detx,y = (7468.44, -6099.11) 
[Fri May  3 13:50:01 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 13:51:23 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 13:51:24 2013] Setting source spectrum file to fullrun_mos1_xmm0153950901_pi300-10000_pass1_cl_src170_src_b10.pi.gz
[Fri May  3 13:51:24 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153950901_pi300-10000_pass1_cl_src170_bgd.pi.gz