[Wed May  1 00:46:29 2013] Detection parameters:
  Position = (351.5, 442.2) = 16 22 20.27 -15 33 23.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 3090.3 +/- 65.3
  Background counts = 22.8
  Rate = 0.7 +/- 0.01

[Wed May  1 00:46:32 2013] Off-axis axis estimate = 11.11'
[Wed May  1 12:30:06 2013] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Wed May  1 12:30:06 2013] Initial guess for spatial extent in simple fitting = 11.98"
[Wed May  1 12:30:06 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.991
[Wed May  1 12:30:06 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 11.98"
[Thu May  2 00:00:07 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src27.ximg exists
[Thu May  2 00:00:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src27.csv
[Thu May  2 00:00:07 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src27_1.ximg exists
[Thu May  2 00:00:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src27.csv
[Thu May  2 00:00:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 00:00:08 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Thu May  2 00:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu May  2 00:00:08 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Thu May  2 00:00:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src27.csv
[Thu May  2 00:00:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950901_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May  2 06:59:21 2013] Warning, spatial fit 27 centroid is now closest to src. 191
[Thu May  2 06:59:22 2013] Vigneting correction estimate = 1.000000
[Thu May  2 06:59:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May  2 06:59:22 2013] Assessing source extent using major
[Thu May  2 06:59:22 2013] Source does appear to be extended
[Thu May  2 06:59:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May  2 06:59:22 2013] Source is confused with source 191
[Thu May  2 17:48:59 2013] Using EEF radius (= 11.98 ")to estimate initial spatial extent for simple fitting
[Thu May  2 17:48:59 2013] Initial guess for spatial extent in simple fitting = 11.98"
[Thu May  2 17:48:59 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.991
[Thu May  2 17:48:59 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 11.98"
[Fri May  3 05:32:02 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src27.ximg exists
[Fri May  3 05:32:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src27.csv
[Fri May  3 05:32:02 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src27_1.ximg exists
[Fri May  3 05:32:02 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src27.csv
[Fri May  3 05:32:02 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 05:32:04 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Fri May  3 05:32:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri May  3 05:32:04 2013] fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Fri May  3 05:32:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src27.csv
[Fri May  3 05:32:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950901_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 13:00:38 2013] Warning, spatial fit 27 centroid is now closest to src. 191
[Fri May  3 13:00:38 2013] Vigneting correction estimate = 1.000000
[Fri May  3 13:00:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 13:00:38 2013] Assessing source extent using major
[Fri May  3 13:00:38 2013] Source does appear to be extended
[Fri May  3 13:00:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 13:07:01 2013] Counts = 3090.349121, rescaling region sizes by 2.000000
[Fri May  3 13:07:01 2013] XMMSAS src. selection expression = ellipse(30536.064850, 38424.417084, 1305.000000, 1305.000000, 0.000000, X, Y)
[Fri May  3 13:07:01 2013] Writing source region out to fullrun_mos1_xmm0153950901_pi300-10000_pass1_cl_src115_src.reg
[Fri May  3 13:07:01 2013] Extracting stamp from image fullrun_mos1_xmm0153950901_pi300-10000_cl_sm2.00.img.gz, (277, 367) - (427, 517)
[Fri May  3 13:07:01 2013] XMMSAS bgd. selection expression = annulus(30536.064850, 38424.417084, 4350.000000, 8700.000000, X, Y) && !ellipse(37073.999600, 33544.846900, 5779.776166, 1375.963240, 131.413400, X, Y) && !ellipse(37269.567800, 33772.765600, 7188.360207, 1370.714439, 129.040600, X, Y) && !ellipse(38163.431400, 30466.814200, 1896.680055, 528.996815, 99.250700, X, Y) && !ellipse(35187.381470, 31027.351471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31185.886954, 31836.302000, 1741.176050, 217.647206, 114.556000, X, Y) && !ellipse(34163.381000, 28959.033000, 1614.304046, 201.788806, 95.996130, X, Y) && !ellipse(31388.694400, 32263.752000, 1584.864046, 198.108806, 116.426200, X, Y) && !ellipse(27906.281400, 34201.701400, 1805.952052, 225.743206, 118.061000, X, Y) && !ellipse(39899.073456, 32662.860138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38184.941800, 30552.336200, 2416.016070, 538.043215, 99.848280, X, Y) && !ellipse(28678.715640, 33368.043800, 1557.696045, 194.712006, 297.261100, X, Y) && !ellipse(27393.141200, 33151.620400, 1699.864049, 212.483206, 114.013400, X, Y) && !ellipse(29152.150400, 28628.328000, 1316.784038, 164.597605, 96.794570, X, Y) && !ellipse(27153.965800, 32577.242664, 1473.888042, 208.736806, 111.499600, X, Y) && !ellipse(35881.820312, 32041.623108, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36748.485596, 36142.963684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27542.011040, 33476.206000, 1735.104050, 216.887206, 115.350100, X, Y) && !ellipse(28525.369400, 32934.388000, 1353.792039, 581.974417, 90.000000, X, Y) && !ellipse(36439.145477, 32839.177979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26951.175262, 32065.008606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28691.519000, 31413.616200, 1876.552054, 461.350413, 106.643900, X, Y) && !ellipse(35008.313019, 35094.407654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33527.083800, 32768.506800, 1698.600049, 215.420806, 116.474600, X, Y) && !ellipse(33793.592600, 33255.287200, 1965.984057, 245.748007, 300.011300, X, Y) && !ellipse(34286.452000, 38349.292000, 1998.856058, 1359.216039, 324.607200, X, Y) && !ellipse(39909.932526, 29792.996490, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34459.912000, 29260.484000, 2504.568072, 903.768026, 109.430800, X, Y) && !ellipse(37856.596588, 34480.660461, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34619.600000, 34535.937800, 2071.344060, 258.917607, 305.588500, X, Y) && !ellipse(26238.299660, 29690.532000, 1282.280037, 439.837613, 107.031698, X, Y) && !ellipse(35458.582092, 32128.617798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37966.532420, 27921.962200, 1843.688053, 230.460807, 88.524000, X, Y) && !ellipse(34200.291200, 33918.967800, 2018.064058, 252.257607, 122.925400, X, Y) && !ellipse(28885.508000, 32079.881800, 537.186415, 537.186415, 0.000000, X, Y) && !ellipse(34835.328000, 30168.267200, 1685.272048, 329.181609, 105.481100, X, Y) && !ellipse(28290.832200, 29931.506000, 1359.216039, 462.334413, 105.353100, X, Y) && !ellipse(35921.101471, 35012.226532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33490.756683, 37363.809875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38081.350128, 29358.588562, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32153.575073, 33623.871887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39676.268707, 31702.857300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31792.347717, 33014.840027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31484.528931, 36234.479889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30253.458221, 35791.320984, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38867.464478, 29093.587433, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26507.894226, 30508.508301, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31035.473206, 35623.440826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30347.010834, 34668.679016, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32287.500061, 37171.840637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33099.593872, 36919.103088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35397.986359, 34310.693451, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30697.318054, 35179.642059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39044.602722, 29964.065338, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29052.843353, 34056.885925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29347.002014, 34537.488708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29852.004517, 35296.107574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37356.699707, 35794.793762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29887.520844, 38136.232239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40636.001040, 29993.623000, 2051.680059, 256.460007, 104.272800, X, Y) && !ellipse(32380.630524, 36116.801025, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33353.011108, 38148.726807, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39180.248000, 30595.600000, 249.585607, 249.585607, 0.000000, X, Y) && !ellipse(30495.549103, 29408.189819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26274.272888, 31675.183929, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28822.700104, 37014.429260, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32963.603271, 37696.708069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27886.218170, 37434.436310, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27179.266174, 35979.883820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27683.514648, 36684.908264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26750.396637, 31111.234467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26857.208466, 37356.694397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28705.005310, 38367.631317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28467.271332, 37522.947021, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26233.494293, 36484.286285, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38293.293152, 34982.654816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29886.716370, 36860.610138, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29169.624817, 38308.355133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29440.387360, 37179.532257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25572.997345, 35780.698212, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30951.457458, 37985.338959, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 13:07:01 2013] Writing fullrun_mos1_xmm0153950901_pi300-10000_pass1_cl_src115.gif
[Fri May  3 14:25:11 2013] Mean detx,y = (-12692.80, -8239.49) 
[Fri May  3 14:25:12 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 14:26:12 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 14:26:12 2013] Setting source spectrum file to fullrun_mos1_xmm0153950901_pi300-10000_pass1_cl_src115_src_b10.pi.gz
[Fri May  3 14:26:12 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0153950901_pi300-10000_pass1_cl_src115_bgd.pi.gz