[Sun May 27 11:29:43 2012] Detection parameters:
  Position = (362.5, 286.0) = 11 4 19.10 38 10 17.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 71.7 +/- 16.8
  Background counts = 60.0
  Rate = 0.006 +/- 0.001

[Sun May 27 11:29:44 2012] Off-axis axis estimate = 4.73'
[Sun May 27 11:35:01 2012] Using EEF radius (= 8.79 ")to estimate initial spatial extent for simple fitting
[Sun May 27 11:35:01 2012] Initial guess for spatial extent in simple fitting = 8.79"
[Sun May 27 11:35:01 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.983
[Sun May 27 11:35:01 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 8.79"
[Sun May 27 12:55:35 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src29.ximg exists
[Sun May 27 12:55:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src29.csv
[Sun May 27 12:55:35 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun May 27 12:55:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src29.csv
[Sun May 27 12:55:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 12:55:35 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun May 27 12:55:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sun May 27 12:55:35 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun May 27 12:55:35 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src29.csv
[Sun May 27 12:55:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:20 2012] Warning, spatial fit 29 centroid is now closest to src. 19
[Sun May 27 18:50:20 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:20 2012] Assessing source extent using major
[Sun May 27 18:50:20 2012] Source does appear to be extended
[Sun May 27 18:50:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 18:50:20 2012] Deleting source due to low Poisson probability 0.9