[Sun May 27 11:29:43 2012] Detection parameters:
  Position = (295.0, 347.0) = 11 4 43.99 38 14 48.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 2868.6 +/- 64.1
  Background counts = 49.2
  Rate = 0.2 +/- 0.004

[Sun May 27 11:29:44 2012] Off-axis axis estimate = 3.53'
[Sun May 27 11:35:01 2012] Using EEF radius (= 8.19 ")to estimate initial spatial extent for simple fitting
[Sun May 27 11:35:01 2012] Initial guess for spatial extent in simple fitting = 8.19"
[Sun May 27 11:35:01 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.704
[Sun May 27 11:35:01 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.19"
[Sun May 27 12:55:34 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src9.ximg exists
[Sun May 27 12:55:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src9.csv
[Sun May 27 12:55:35 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun May 27 12:55:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src9.csv
[Sun May 27 12:55:35 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 12:55:35 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun May 27 12:55:35 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun May 27 12:55:35 2012] Fit fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun May 27 18:50:20 2012] Spatial fit model total counts = 3178.950000, observed total counts = 3047.000000
[Sun May 27 18:50:20 2012] Offset between fit and detection position for source 11 = 0.162845 pixels
[Sun May 27 18:50:20 2012] 3182.230000 total counts/ 1162.940000 bgd. counts: snr = 59.213406
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.162845 pixels
  Position = (294.9, 347.0) = 11 4 44.05 38 14 47.6
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2019.3 +/- 56.4
  Background counts = 1162.9
  Rate = 0.1 +/- 0.003
[Sun May 27 18:50:20 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:20 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:20 2012] Source does appear to be extended
[Sun May 27 18:50:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 18:50:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 18:50:50 2012] Initial guess for spatial extent in simple fitting = 5.54"
[Sun May 27 18:50:50 2012] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.273
[Sun May 27 18:50:50 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 5.54"
[Sun May 27 19:55:20 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_src9.ximg exists
[Sun May 27 19:55:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_src9.csv
[Sun May 27 19:55:20 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun May 27 19:55:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_src9.csv
[Sun May 27 19:55:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:55:20 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun May 27 19:55:20 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun May 27 19:55:20 2012] Fit fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun May 27 23:58:35 2012] Spatial fit model total counts = 3177.880000, observed total counts = 3047.000000
[Sun May 27 23:58:35 2012] Offset between fit and detection position for source 11 = 0.000632 pixels
[Sun May 27 23:58:35 2012] 3181.260000 total counts/ 1163.600000 bgd. counts: snr = 59.148826
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.000632 pixels
  Position = (294.9, 347.0) = 11 4 44.05 38 14 47.6
  Extent = 5.5 (5.3-5.7)", rotation angle = 0
  Source counts = 2017.7 +/- 56.4
  Background counts = 1163.6
  Rate = 0.1 +/- 0.003
[Sun May 27 23:58:35 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:35 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:35 2012] Source does appear to be extended
[Sun May 27 23:58:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:58:50 2012] Counts = 2017.660000, rescaling region sizes by 2.000000
[Sun May 27 23:58:50 2012] XMMSAS src. selection expression = ellipse(25605.798380, 30143.310800, 662.662819, 662.662819, 0.000000, X, Y)
[Sun May 27 23:58:50 2012] Writing source region out to fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src11_src.reg
[Sun May 27 23:58:50 2012] Extracting stamp from image fullrun_pn_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (257, 309) - (333, 385)
[Sun May 27 23:58:50 2012] XMMSAS bgd. selection expression = annulus(25605.798380, 30143.310800, 2208.876064, 4417.752127, X, Y) && !ellipse(29506.579400, 27426.687220, 2137.202461, 2137.202461, 0.000000, X, Y) && !ellipse(29377.941071, 29468.729797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29952.754913, 28770.295135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30301.293884, 28325.283020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30745.427185, 27569.900635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25420.747345, 25548.024139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24370.712463, 34232.940918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24351.482086, 30126.829254, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 23:58:50 2012] Writing fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src11.gif
[Mon May 28 00:13:50 2012] Mean detx,y = (1225.26, -2104.06) 
[Mon May 28 00:13:53 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 00:14:30 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 00:14:30 2012] Setting source spectrum file to fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May 28 00:14:30 2012] Setting bgd. spectrum file to fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon May 28 05:54:36 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:36 2012] Error reading totcts from fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May 28 05:54:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:36 2012] Using photon index=1.80, rate=0.118, arf fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src11.arf
[Mon May 28 05:54:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:36 2012] Updating source flux to 4.1e-13