[Sun May 27 11:29:42 2012] Detection parameters:
  Position = (339.7, 315.9) = 11 4 27.49 38 12 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 672694.8 +/- 912.6
  Background counts = 96.4
  Rate = 5e+01 +/- 0.06

[Sun May 27 11:29:44 2012] Off-axis axis estimate = 3.25'
[Sun May 27 11:35:01 2012] Using EEF radius (= 8.05 ")to estimate initial spatial extent for simple fitting
[Sun May 27 11:35:01 2012] Initial guess for spatial extent in simple fitting = 8.05"
[Sun May 27 11:35:01 2012] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.904
[Sun May 27 11:35:01 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.05"
[Sun May 27 12:55:34 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 12:55:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src1.csv
[Sun May 27 12:55:34 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 12:55:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src1.csv
[Sun May 27 12:55:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 12:55:35 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 12:55:35 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 12:55:35 2012] Fit fullrun_pn_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 18:50:20 2012] Spatial fit model total counts = 686016.000000, observed total counts = 690741.000000
[Sun May 27 18:50:20 2012] Offset between fit and detection position for source 1 = 0.042458 pixels
[Sun May 27 18:50:20 2012] 673430.000000 total counts/ 25600.000000 bgd. counts: snr = 4048.937500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.042458 pixels
  Position = (339.7, 315.8) = 11 4 27.51 38 12 31.8
  Extent = 8.7 (8.7-8.7)", rotation angle = 0
  Source counts = 647830.0 +/- 820.6
  Background counts = 25600.0
  Rate = 4e+01 +/- 0.05
[Sun May 27 18:50:20 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:20 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:20 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:20 2012] Source does appear to be extended
[Sun May 27 18:50:20 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 18:50:50 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 18:50:50 2012] Initial guess for spatial extent in simple fitting = 8.72"
[Sun May 27 18:50:50 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.996
[Sun May 27 18:50:50 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 8.72"
[Sun May 27 19:55:20 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 27 19:55:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_src1.csv
[Sun May 27 19:55:20 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 27 19:55:20 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_src1.csv
[Sun May 27 19:55:20 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 19:55:20 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 27 19:55:20 2012] fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 27 19:55:20 2012] Fit fullrun_pn_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 27 23:58:35 2012] Spatial fit model total counts = 694133.000000, observed total counts = 696079.000000
[Sun May 27 23:58:35 2012] Offset between fit and detection position for source 1 = 0.022077 pixels
[Sun May 27 23:58:35 2012] 683342.000000 total counts/ 25600.000000 bgd. counts: snr = 4110.887500
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.022077 pixels
  Position = (339.7, 315.8) = 11 4 27.51 38 12 31.7
  Extent = 8.9 (8.9-8.9)", rotation angle = 0
  Source counts = 657742.0 +/- 826.6
  Background counts = 25600.0
  Rate = 4e+01 +/- 0.05
[Sun May 27 23:58:35 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:35 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:35 2012] Source does appear to be extended
[Sun May 27 23:58:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:58:50 2012] Counts = 657742.000000, rescaling region sizes by 3.000000
[Sun May 27 23:58:50 2012] XMMSAS src. selection expression = ellipse(29506.579400, 27426.687220, 1602.901846, 1602.901846, 0.000000, X, Y)
[Sun May 27 23:58:50 2012] Writing source region out to fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src1_src.reg
[Sun May 27 23:58:50 2012] Extracting stamp from image fullrun_pn_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (248, 224) - (432, 408)
[Sun May 27 23:58:50 2012] XMMSAS bgd. selection expression = annulus(29506.579400, 27426.687220, 8014.509231, 16029.018461, X, Y) && !ellipse(29377.941071, 29468.729797, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35035.211121, 28996.891266, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29952.754913, 28770.295135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30301.293884, 28325.283020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30745.427185, 27569.900635, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31238.962616, 26773.208649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25420.747345, 25548.024139, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25605.798380, 30143.310800, 441.775213, 441.775213, 0.000000, X, Y) && !ellipse(24370.712463, 34232.940918, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24351.482086, 30126.829254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16666.364580, 29250.855200, 457.056013, 457.056013, 0.000000, X, Y) && !ellipse(16477.888337, 25728.428899, 599.637697, 368.246702, 67.425607, X, Y) && !ellipse(31652.594940, 37335.464783, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 27 23:58:50 2012] Writing fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src1.gif
[Sun May 27 23:59:28 2012] Mean detx,y = (2675.32, 2398.35) 
[Sun May 27 23:59:35 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 00:03:21 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 00:03:21 2012] Setting source spectrum file to fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 00:03:21 2012] Setting bgd. spectrum file to fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 05:54:35 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:35 2012] Error reading totcts from fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 05:54:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:36 2012] Using photon index=1.80, rate=38.6, arf fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src1.arf
[Mon May 28 05:54:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:36 2012] Updating source flux to 1.3e-10
[Mon May 28 05:58:26 2012] Reading fit data from xmm0153950701/analysis//spectral/fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 28 05:58:26 2012] Spectral fit parameter nH value = 3.94652e+20
[Mon May 28 05:58:26 2012] Spectral fit parameter PhoIndex value = 2.73697
[Mon May 28 05:58:26 2012] Failed to get F(0.3-8.0) from xmm0153950701/analysis//spectral/fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 28 05:58:26 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:58:26 2012] Using Nh = 3.9e+20, photon index=2.74, rate=38.6, arf fullrun_pn_xmm0153950701_pi300-10000_pass1_cl_src1.arf
[Mon May 28 05:58:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:58:26 2012] Updating source flux to 9.1e-11