[Sun May 27 11:30:56 2012] Detection parameters:
  Position = (337.8, 285.2) = 11 4 28.21 38 10 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.6 +/- 15.1
  Background counts = 28.0
  Rate = 0.005 +/- 0.0009

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 3.01'
[Sun May 27 15:07:36 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Sun May 27 15:07:36 2012] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.972
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 29 for pass 0, mean size = 7.93"
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src29.ximg exists
[Sun May 27 18:50:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src29.csv
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src29_1.ximg exists
[Sun May 27 18:50:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src29.csv
[Sun May 27 18:50:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Sun May 27 18:50:12 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Sun May 27 18:50:40 2012] Source 46 is offset by 7.109652 and -6.957121 pixels which is larger than
2 X fitted extent = 2.158970 x 2.158970, not incorporating fit results
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:19:35 2012] Using EEF radius (= 7.93 ")to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 7.93"
[Sun May 27 21:19:35 2012] source mask rpix=1.8, npix_max = 21, mask sum = 21, frac = 0.972
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 27 for pass 1, mean size = 7.93"
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src27.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src27.csv
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src27_1.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src27.csv
[Sun May 27 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Sun May 27 23:58:43 2012] Source 46 is offset by 7.076364 and -6.969764 pixels which is larger than
2 X fitted extent = 2.086304 x 2.086304, not incorporating fit results
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:58:38 2012] XMMSAS src. selection expression = ellipse(29341.293701, 24765.090515, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing source region out to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src46_src.reg
[Mon May 28 02:58:38 2012] Extracting stamp from image fullrun_mos2_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (300, 248) - (375, 323)
[Mon May 28 02:58:38 2012] XMMSAS bgd. selection expression = annulus(29341.293701, 24765.090515, 1087.500000, 2175.000000, X, Y) && !ellipse(29492.121200, 27418.079400, 2940.744085, 2940.744085, 0.000000, X, Y) && !ellipse(27735.790000, 25451.112000, 709.105620, 709.105620, 0.000000, X, Y) && !ellipse(27417.555054, 26367.727264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32209.335999, 26409.352814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.359894, 27238.730865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28607.362000, 24919.856000, 481.852014, 481.852014, 0.000000, X, Y) && !ellipse(31727.413200, 24300.034600, 620.215218, 620.215218, 0.000000, X, Y) && !ellipse(28221.540405, 24332.835815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27268.398163, 25099.002930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25451.630000, 27186.938000, 2240.736064, 2240.736064, 0.000000, X, Y) && !ellipse(25746.906000, 28782.107800, 2436.352070, 2436.352070, 0.000000, X, Y) && !ellipse(32695.012000, 24993.600000, 1441.392041, 1441.392041, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src46.gif
[Mon May 28 03:11:33 2012] Mean detx,y = (-990.95, -4515.21) 
[Mon May 28 03:11:34 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:11:41 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:11:41 2012] Setting source spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Mon May 28 03:11:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src46_bgd.pi.gz
[Mon May 28 05:04:28 2012] Not generating rmf since there are only 81 counts
[Mon May 28 05:04:28 2012] rmf not generated due to insufficient counts
[Mon May 28 05:54:37 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:37 2012] Error reading totcts from fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src46_src_b10.pi.gz
[Mon May 28 05:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:37 2012] Using photon index=1.80, rate=0.00491, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src46.arf
[Mon May 28 05:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:37 2012] Updating source flux to 5e-14
[Mon May 28 05:55:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting