[Sun May 27 11:30:56 2012] Detection parameters:
  Position = (304.9, 300.1) = 11 4 40.35 38 11 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.3 +/- 17.9
  Background counts = 26.9
  Rate = 0.007 +/- 0.0009

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 0.49'
[Sun May 27 15:07:36 2012] Using EEF radius (= 6.67 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 6.67"
[Sun May 27 15:07:36 2012] source mask rpix=1.5, npix_max = 16, mask sum = 16, frac = 0.967
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 6.67"
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src17.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src17.csv
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src17_1.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src17.csv
[Sun May 27 18:50:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Sun May 27 18:50:12 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 844.231000, observed total counts = 847.000000
[Sun May 27 18:50:40 2012] Offset between fit and detection position for source 40 = 6.014965 pixels
[Sun May 27 18:50:40 2012] 878.907000 total counts/ 745.168000 bgd. counts: snr = 4.899265
Spatial fit parameters:
  Offset between fit and detection position for source 40 = 6.014965 pixels
  Position = (299.1, 298.6) = 11 4 42.49 38 11 16.7
  Extent = 13.3 (13.3-26.7)", rotation angle = 0
  Source counts = 133.7 +/- 29.6
  Background counts = 745.2
  Rate = 0.007 +/- 0.002
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 18:50:40 2012] Source is confused with source 10
[Sun May 27 21:19:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 13.34"
[Sun May 27 21:19:35 2012] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.963
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 13.34"
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src17.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src17.csv
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src17.csv
[Sun May 27 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sun May 27 23:58:43 2012] Warning, spatial fit 17 centroid is now closest to src. 9
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:58:37 2012] XMMSAS src. selection expression = ellipse(25973.430000, 25926.498000, 800.532023, 800.532023, 0.000000, X, Y)
[Mon May 28 02:58:37 2012] Writing source region out to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src40_src.reg
[Mon May 28 02:58:37 2012] Extracting stamp from image fullrun_mos2_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (253, 253) - (345, 345)
[Mon May 28 02:58:37 2012] XMMSAS bgd. selection expression = annulus(25973.430000, 25926.498000, 1334.220038, 2668.440077, X, Y) && !ellipse(29492.121200, 27418.079400, 2940.744085, 2940.744085, 0.000000, X, Y) && !ellipse(28786.612946, 28942.468475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29425.800629, 29364.968597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.540000, 28706.096000, 459.399213, 459.399213, 0.000000, X, Y) && !ellipse(27659.162720, 28142.609039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27735.790000, 25451.112000, 709.105620, 709.105620, 0.000000, X, Y) && !ellipse(27417.555054, 26367.727264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.359894, 27238.730865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28607.362000, 24919.856000, 481.852014, 481.852014, 0.000000, X, Y) && !ellipse(25413.549200, 25546.335400, 441.503213, 441.503213, 0.000000, X, Y) && !ellipse(27418.378000, 30174.202000, 2352.760068, 2352.760068, 0.000000, X, Y) && !ellipse(28221.540405, 24332.835815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.606000, 30763.098000, 2769.216080, 2769.216080, 0.000000, X, Y) && !ellipse(27268.398163, 25099.002930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29341.293701, 24765.090515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25451.630000, 27186.938000, 2240.736064, 2240.736064, 0.000000, X, Y) && !ellipse(25746.906000, 28782.107800, 2436.352070, 2436.352070, 0.000000, X, Y)
[Mon May 28 02:58:37 2012] Writing fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src40.gif
[Mon May 28 03:07:17 2012] Mean detx,y = (1166.41, -1703.05) 
[Mon May 28 03:07:17 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:07:25 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:07:25 2012] Setting source spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon May 28 03:07:25 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src40_bgd.pi.gz
[Mon May 28 05:54:37 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:37 2012] Error reading totcts from fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src40_src_b10.pi.gz
[Mon May 28 05:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:37 2012] Using photon index=1.80, rate=0.00701, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src40.arf
[Mon May 28 05:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:37 2012] Updating source flux to 7.2e-14
[Mon May 28 05:55:38 2012] Flag c found in src. 40 procflags, skipping spectral fitting