[Sun May 27 11:30:56 2012] Detection parameters:
  Position = (292.2, 313.0) = 11 4 45.03 38 12 18.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 92.5 +/- 15.0
  Background counts = 23.7
  Rate = 0.005 +/- 0.0008

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 1.15'
[Sun May 27 15:07:36 2012] Using EEF radius (= 7.00 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 7.00"
[Sun May 27 15:07:36 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.899
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 7.00"
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src30.ximg exists
[Sun May 27 18:50:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src30.csv
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src30_1.ximg exists
[Sun May 27 18:50:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src30.csv
[Sun May 27 18:50:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Sun May 27 18:50:12 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src30 appears to have run properly
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 600.147000, observed total counts = 599.000000
[Sun May 27 18:50:40 2012] Offset between fit and detection position for source 39 = 5.358661 pixels
[Sun May 27 18:50:40 2012] 617.270000 total counts/ 513.828000 bgd. counts: snr = 4.563395
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 5.358661 pixels
  Position = (287.4, 315.3) = 11 4 46.81 38 12 29.7
  Extent = 14.0 (14.0-28.0)", rotation angle = 0
  Source counts = 103.4 +/- 24.8
  Background counts = 513.8
  Rate = 0.005 +/- 0.001
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:19:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 14.00"
[Sun May 27 21:19:35 2012] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.885
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 28 for pass 1, mean size = 14.00"
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src28.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src28.csv
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src28_1.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src28.csv
[Sun May 27 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src28 appears to have run properly
[Sun May 27 23:58:43 2012] Spatial fit model total counts = 648.581000, observed total counts = 646.000000
[Sun May 27 23:58:43 2012] Offset between fit and detection position for source 39 = 6.141502 pixels
[Sun May 27 23:58:43 2012] 629.041000 total counts/ 202.637000 bgd. counts: snr = 29.954488
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 6.141502 pixels
  Position = (293.1, 313.1) = 11 4 44.71 38 12 19.8
  Extent = 28.0 (28.0-56.0)", rotation angle = 0
  Source counts = 426.4 +/- 25.1
  Background counts = 202.6
  Rate = 0.02 +/- 0.001
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:58:43 2012] Source is confused with source 9
[Mon May 28 02:58:38 2012] XMMSAS src. selection expression = ellipse(25451.630000, 27186.938000, 1680.552048, 1680.552048, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing source region out to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src39_src.reg
[Mon May 28 02:58:38 2012] Extracting stamp from image fullrun_mos2_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (197, 216) - (390, 410)
[Mon May 28 02:58:38 2012] XMMSAS bgd. selection expression = annulus(25451.630000, 27186.938000, 2800.920081, 5601.840161, X, Y) && !ellipse(29492.121200, 27418.079400, 2940.744085, 2940.744085, 0.000000, X, Y) && !ellipse(28786.612946, 28942.468475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29425.800629, 29364.968597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.540000, 28706.096000, 459.399213, 459.399213, 0.000000, X, Y) && !ellipse(27659.162720, 28142.609039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27735.790000, 25451.112000, 709.105620, 709.105620, 0.000000, X, Y) && !ellipse(27417.555054, 26367.727264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.359894, 27238.730865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28607.362000, 24919.856000, 481.852014, 481.852014, 0.000000, X, Y) && !ellipse(25413.549200, 25546.335400, 441.503213, 441.503213, 0.000000, X, Y) && !ellipse(25973.430000, 25926.498000, 1067.376031, 1067.376031, 0.000000, X, Y) && !ellipse(27418.378000, 30174.202000, 2352.760068, 2352.760068, 0.000000, X, Y) && !ellipse(28221.540405, 24332.835815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.606000, 30763.098000, 2769.216080, 2769.216080, 0.000000, X, Y) && !ellipse(27268.398163, 25099.002930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.556000, 31759.318000, 1491.928043, 1491.928043, 0.000000, X, Y) && !ellipse(25272.810000, 33219.302000, 1552.968045, 1552.968045, 0.000000, X, Y) && !ellipse(26868.404000, 31174.434000, 769.468022, 769.468022, 0.000000, X, Y) && !ellipse(25735.834000, 32640.280000, 1509.024043, 1509.024043, 0.000000, X, Y) && !ellipse(29341.293701, 24765.090515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25746.906000, 28782.107800, 2436.352070, 2436.352070, 0.000000, X, Y) && !ellipse(28245.452000, 30680.552800, 1358.944039, 1358.944039, 0.000000, X, Y) && !ellipse(26303.326000, 30124.277400, 1166.360034, 1166.360034, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src39.gif
[Mon May 28 03:11:44 2012] Mean detx,y = (561.14, -592.22) 
[Mon May 28 03:11:45 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:11:56 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:11:56 2012] Setting source spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon May 28 03:11:56 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Mon May 28 05:54:37 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:37 2012] Error reading totcts from fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon May 28 05:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:37 2012] Using photon index=1.80, rate=0.0223, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src39.arf
[Mon May 28 05:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:37 2012] Updating source flux to 2e-13
[Mon May 28 05:55:38 2012] Flag c found in src. 39 procflags, skipping spectral fitting