[Sun May 27 11:30:56 2012] Detection parameters:
  Position = (294.3, 330.9) = 11 4 44.28 38 13 35.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.7 +/- 13.1
  Background counts = 22.4
  Rate = 0.004 +/- 0.0007

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 2.37'
[Sun May 27 15:07:36 2012] Using EEF radius (= 7.61 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 7.61"
[Sun May 27 15:07:36 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.987
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 32 for pass 0, mean size = 7.61"
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src32.ximg exists
[Sun May 27 18:50:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src32.csv
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src32_1.ximg exists
[Sun May 27 18:50:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src32.csv
[Sun May 27 18:50:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src32.ximg exists
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src32_1.ximg exists
[Sun May 27 18:50:12 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src32 appears to have run properly
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 521.058000, observed total counts = 476.000000
[Sun May 27 18:50:40 2012] Offset between fit and detection position for source 38 = 2.004090 pixels
[Sun May 27 18:50:40 2012] 525.418000 total counts/ 429.375000 bgd. counts: snr = 4.634974
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 2.004090 pixels
  Position = (292.8, 332.3) = 11 4 44.81 38 13 43.4
  Extent = 15.2 (15.2-30.5)", rotation angle = 0
  Source counts = 96.0 +/- 22.9
  Background counts = 429.4
  Rate = 0.005 +/- 0.001
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:19:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 15.23"
[Sun May 27 21:19:35 2012] source mask rpix=3.5, npix_max = 64, mask sum = 61, frac = 0.953
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 15.23"
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src29.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src29.csv
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src29_1.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src29.csv
[Sun May 27 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src29 appears to have run properly
[Sun May 27 23:58:43 2012] Spatial fit model total counts = 778.663000, observed total counts = 719.000000
[Sun May 27 23:58:43 2012] Offset between fit and detection position for source 38 = 3.773011 pixels
[Sun May 27 23:58:43 2012] 771.975000 total counts/ 324.116000 bgd. counts: snr = 24.876603
Spatial fit parameters:
  Offset between fit and detection position for source 38 = 3.773011 pixels
  Position = (296.5, 331.4) = 11 4 43.46 38 13 39.5
  Extent = 30.5 (30.4-60.9)", rotation angle = 0
  Source counts = 447.9 +/- 27.8
  Background counts = 324.1
  Rate = 0.02 +/- 0.001
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:58:43 2012] Source is confused with source 39
[Sun May 27 23:58:43 2012] Source is confused with source 54
[Mon May 28 02:58:38 2012] XMMSAS src. selection expression = ellipse(25746.906000, 28782.107800, 1827.264053, 1827.264053, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing source region out to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src38_src.reg
[Mon May 28 02:58:38 2012] Extracting stamp from image fullrun_mos2_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (191, 226) - (402, 436)
[Mon May 28 02:58:38 2012] XMMSAS bgd. selection expression = annulus(25746.906000, 28782.107800, 3045.440088, 6090.880175, X, Y) && !ellipse(29492.121200, 27418.079400, 2940.744085, 2940.744085, 0.000000, X, Y) && !ellipse(28786.612946, 28942.468475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29425.800629, 29364.968597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.540000, 28706.096000, 459.399213, 459.399213, 0.000000, X, Y) && !ellipse(27659.162720, 28142.609039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27735.790000, 25451.112000, 709.105620, 709.105620, 0.000000, X, Y) && !ellipse(27417.555054, 26367.727264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32209.335999, 26409.352814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24433.567800, 34224.714200, 527.926415, 527.926415, 0.000000, X, Y) && !ellipse(26728.359894, 27238.730865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28607.362000, 24919.856000, 481.852014, 481.852014, 0.000000, X, Y) && !ellipse(25413.549200, 25546.335400, 441.503213, 441.503213, 0.000000, X, Y) && !ellipse(24570.522000, 34075.334000, 1268.840037, 1268.840037, 0.000000, X, Y) && !ellipse(31727.413200, 24300.034600, 620.215218, 620.215218, 0.000000, X, Y) && !ellipse(25973.430000, 25926.498000, 1067.376031, 1067.376031, 0.000000, X, Y) && !ellipse(27418.378000, 30174.202000, 2352.760068, 2352.760068, 0.000000, X, Y) && !ellipse(28221.540405, 24332.835815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.606000, 30763.098000, 2769.216080, 2769.216080, 0.000000, X, Y) && !ellipse(27268.398163, 25099.002930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.556000, 31759.318000, 1491.928043, 1491.928043, 0.000000, X, Y) && !ellipse(25272.810000, 33219.302000, 1552.968045, 1552.968045, 0.000000, X, Y) && !ellipse(26868.404000, 31174.434000, 769.468022, 769.468022, 0.000000, X, Y) && !ellipse(23890.520000, 35197.130000, 1699.912049, 1699.912049, 0.000000, X, Y) && !ellipse(25735.834000, 32640.280000, 1509.024043, 1509.024043, 0.000000, X, Y) && !ellipse(29341.293701, 24765.090515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25451.630000, 27186.938000, 2240.736064, 2240.736064, 0.000000, X, Y) && !ellipse(28245.452000, 30680.552800, 1358.944039, 1358.944039, 0.000000, X, Y) && !ellipse(26303.326000, 30124.277400, 1166.360034, 1166.360034, 0.000000, X, Y) && !ellipse(32695.012000, 24993.600000, 1441.392041, 1441.392041, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src38.gif
[Mon May 28 03:12:00 2012] Mean detx,y = (-621.72, 362.17) 
[Mon May 28 03:12:00 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:12:18 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:12:18 2012] Setting source spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon May 28 03:12:18 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src38_bgd.pi.gz
[Mon May 28 05:54:37 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:37 2012] Error reading totcts from fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src38_src_b10.pi.gz
[Mon May 28 05:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:37 2012] Using photon index=1.80, rate=0.0235, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src38.arf
[Mon May 28 05:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:37 2012] Updating source flux to 2.3e-13
[Mon May 28 05:55:38 2012] Flag c found in src. 38 procflags, skipping spectral fitting