[Sun May 27 11:30:56 2012] Detection parameters:
  Position = (403.3, 333.3) = 11 4 4.04 38 13 48.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.5 +/- 14.0
  Background counts = 12.0
  Rate = 0.009 +/- 0.001

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 8.01'
[Sun May 27 15:07:36 2012] Using EEF radius (= 10.43 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 10.43"
[Sun May 27 15:07:36 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.071
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 10.43"
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src15.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src15.csv
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src15_1.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src15.csv
[Sun May 27 18:50:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Sun May 27 18:50:12 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 202.723000, observed total counts = 203.000000
[Sun May 27 18:50:40 2012] Offset between fit and detection position for source 37 = 0.340212 pixels
[Sun May 27 18:50:40 2012] 204.274500 total counts/ 126.459000 bgd. counts: snr = 6.919763
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.340212 pixels
  Position = (403.0, 333.4) = 11 4 4.15 38 13 47.9
  Extent = 5.5 (4.3-6.8)", rotation angle = 0
  Source counts = 77.8 +/- 14.3
  Background counts = 126.5
  Rate = 0.004 +/- 0.0007
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:19:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 5.54"
[Sun May 27 21:19:35 2012] source mask rpix=1.3, npix_max = 12, mask sum = 12, frac = 0.953
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 5.54"
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src15.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src15.csv
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src15_1.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src15.csv
[Sun May 27 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Sun May 27 23:58:43 2012] Spatial fit model total counts = 203.000000, observed total counts = 203.000000
[Sun May 27 23:58:43 2012] Offset between fit and detection position for source 37 = 0.004289 pixels
[Sun May 27 23:58:43 2012] 204.563300 total counts/ 127.154000 bgd. counts: snr = 6.864804
Spatial fit parameters:
  Offset between fit and detection position for source 37 = 0.004289 pixels
  Position = (403.0, 333.4) = 11 4 4.15 38 13 47.9
  Extent = 5.4 (4.3-6.9)", rotation angle = 0
  Source counts = 77.4 +/- 14.3
  Background counts = 127.2
  Rate = 0.004 +/- 0.0007
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:58:43 2012] Deleting source due to low Poisson probability 1.0