[Sun May 27 11:30:55 2012] Detection parameters:
  Position = (314.5, 350.9) = 11 4 36.79 38 15 4.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.5 +/- 15.9
  Background counts = 21.2
  Rate = 0.007 +/- 0.0009

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 3.98'
[Sun May 27 15:07:36 2012] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Sun May 27 15:07:36 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.054
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 8.42"
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src20.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src20.csv
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src20.csv
[Sun May 27 18:50:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun May 27 18:50:12 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sun May 27 18:50:40 2012] Warning, spatial fit 20 centroid is now closest to src. 32
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 18:50:40 2012] Source is confused with source 35
[Sun May 27 21:19:35 2012] Using EEF radius (= 8.42 ")to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 8.42"
[Sun May 27 21:19:35 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.054
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 8.42"
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src20.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src20.csv
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src20_1.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src20.csv
[Sun May 27 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Sun May 27 23:58:43 2012] Spatial fit model total counts = 2230.880000, observed total counts = 2220.000000
[Sun May 27 23:58:43 2012] Offset between fit and detection position for source 33 = 4.374531 pixels
[Sun May 27 23:58:43 2012] Warning, changing simple spatial fit ID from 20 to 18
[Sun May 27 23:58:43 2012] 2129.410000 total counts/ 1119.410000 bgd. counts: snr = 30.187475
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 4.374531 pixels
  Position = (311.1, 353.5) = 11 4 38.08 38 15 15.8
  Extent = 33.2 (33.1-66.3)", rotation angle = 0
  Source counts = 1010.0 +/- 46.1
  Background counts = 1119.4
  Rate = 0.05 +/- 0.002
[Sun May 27 23:58:43 2012] Spatial fit model total counts = 986.839000, observed total counts = 990.000000
[Sun May 27 23:58:43 2012] Offset between fit and detection position for source 33 = 1.469095 pixels
[Sun May 27 23:58:43 2012] Warning, changing simple spatial fit ID from 18 to 22
[Sun May 27 23:58:43 2012] 955.366000 total counts/ 266.676000 bgd. counts: snr = 42.172739
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 1.469095 pixels
  Position = (312.4, 354.2) = 11 4 37.59 38 15 18.6
  Extent = 34.6 (34.6-69.2)", rotation angle = 0
  Source counts = 688.7 +/- 30.9
  Background counts = 266.7
  Rate = 0.04 +/- 0.002
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:58:38 2012] XMMSAS src. selection expression = ellipse(27129.606000, 30763.098000, 2076.912060, 2076.912060, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing source region out to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src33_src.reg
[Mon May 28 02:58:38 2012] Extracting stamp from image fullrun_mos2_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (193, 235) - (432, 474)
[Mon May 28 02:58:38 2012] XMMSAS bgd. selection expression = annulus(27129.606000, 30763.098000, 3461.520100, 6923.040199, X, Y) && !ellipse(29492.121200, 27418.079400, 2940.744085, 2940.744085, 0.000000, X, Y) && !ellipse(28786.612946, 28942.468475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29425.800629, 29364.968597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.540000, 28706.096000, 459.399213, 459.399213, 0.000000, X, Y) && !ellipse(27659.162720, 28142.609039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27735.790000, 25451.112000, 709.105620, 709.105620, 0.000000, X, Y) && !ellipse(27417.555054, 26367.727264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32209.335999, 26409.352814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24433.567800, 34224.714200, 527.926415, 527.926415, 0.000000, X, Y) && !ellipse(26728.359894, 27238.730865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28607.362000, 24919.856000, 481.852014, 481.852014, 0.000000, X, Y) && !ellipse(25413.549200, 25546.335400, 441.503213, 441.503213, 0.000000, X, Y) && !ellipse(24570.522000, 34075.334000, 1268.840037, 1268.840037, 0.000000, X, Y) && !ellipse(31727.413200, 24300.034600, 620.215218, 620.215218, 0.000000, X, Y) && !ellipse(25973.430000, 25926.498000, 1067.376031, 1067.376031, 0.000000, X, Y) && !ellipse(27418.378000, 30174.202000, 2352.760068, 2352.760068, 0.000000, X, Y) && !ellipse(28221.540405, 24332.835815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27268.398163, 25099.002930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.556000, 31759.318000, 1491.928043, 1491.928043, 0.000000, X, Y) && !ellipse(25272.810000, 33219.302000, 1552.968045, 1552.968045, 0.000000, X, Y) && !ellipse(26868.404000, 31174.434000, 769.468022, 769.468022, 0.000000, X, Y) && !ellipse(23890.520000, 35197.130000, 1699.912049, 1699.912049, 0.000000, X, Y) && !ellipse(25735.834000, 32640.280000, 1509.024043, 1509.024043, 0.000000, X, Y) && !ellipse(29341.293701, 24765.090515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25451.630000, 27186.938000, 2240.736064, 2240.736064, 0.000000, X, Y) && !ellipse(25746.906000, 28782.107800, 2436.352070, 2436.352070, 0.000000, X, Y) && !ellipse(28245.452000, 30680.552800, 1358.944039, 1358.944039, 0.000000, X, Y) && !ellipse(26303.326000, 30124.277400, 1166.360034, 1166.360034, 0.000000, X, Y) && !ellipse(22781.260000, 36495.006000, 1564.488045, 1564.488045, 0.000000, X, Y) && !ellipse(21356.828000, 38564.364000, 1879.992054, 1879.992054, 0.000000, X, Y) && !ellipse(32695.012000, 24993.600000, 1441.392041, 1441.392041, 0.000000, X, Y) && !ellipse(20472.928000, 39870.496000, 3756.168108, 3756.168108, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src33.gif
[Mon May 28 03:08:09 2012] Mean detx,y = (-2355.34, 1243.65) 
[Mon May 28 03:08:10 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:09:28 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:09:28 2012] Setting source spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon May 28 03:09:28 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Mon May 28 05:54:37 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:37 2012] Error reading totcts from fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src33_src_b10.pi.gz
[Mon May 28 05:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:37 2012] Using photon index=1.80, rate=0.0361, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src33.arf
[Mon May 28 05:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:37 2012] Updating source flux to 3.3e-13
[Mon May 28 05:55:38 2012] Flag c found in src. 33 procflags, skipping spectral fitting