[Sun May 27 11:30:55 2012] Detection parameters:
  Position = (304.0, 365.8) = 11 4 40.70 38 16 9.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 103.8 +/- 14.3
  Background counts = 18.9
  Rate = 0.006 +/- 0.0009

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 4.90'
[Sun May 27 15:07:36 2012] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 8.88"
[Sun May 27 15:07:36 2012] source mask rpix=2.0, npix_max = 25, mask sum = 30, frac = 1.161
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 8.88"
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src23.ximg exists
[Sun May 27 18:50:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src23.csv
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src23_1.ximg exists
[Sun May 27 18:50:11 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src23.csv
[Sun May 27 18:50:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Sun May 27 18:50:12 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 484.873000, observed total counts = 484.000000
[Sun May 27 18:50:40 2012] Offset between fit and detection position for source 31 = 6.938278 pixels
[Sun May 27 18:50:40 2012] 481.496000 total counts/ 231.855000 bgd. counts: snr = 16.394859
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 6.938278 pixels
  Position = (307.7, 360.0) = 11 4 39.31 38 15 43.9
  Extent = 17.8 (17.5-35.5)", rotation angle = 0
  Source counts = 249.6 +/- 21.9
  Background counts = 231.9
  Rate = 0.01 +/- 0.001
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 561.175000, observed total counts = 561.000000
[Sun May 27 18:50:40 2012] Offset between fit and detection position for source 31 = 4.659300 pixels
[Sun May 27 18:50:40 2012] Warning, changing simple spatial fit ID from 23 to 26
[Sun May 27 18:50:40 2012] 518.966000 total counts/ 278.981000 bgd. counts: snr = 14.368015
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 4.659300 pixels
  Position = (304.9, 363.7) = 11 4 40.34 38 16 0.1
  Extent = 17.3 (17.3-34.6)", rotation angle = 0
  Source counts = 240.0 +/- 22.8
  Background counts = 279.0
  Rate = 0.01 +/- 0.001
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 18:50:40 2012] Source is confused with source 32
[Sun May 27 21:19:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 17.31"
[Sun May 27 21:19:35 2012] source mask rpix=4.0, npix_max = 80, mask sum = 81, frac = 1.010
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 22 for pass 1, mean size = 17.31"
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src22.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src22.csv
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src22_1.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src22.csv
[Sun May 27 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src22_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src22.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src22.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src22_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src22 appears to have run properly
[Sun May 27 23:58:43 2012] Warning, spatial fit 22 centroid is now closest to src. 33
[Sun May 27 23:58:43 2012] Spatial fit model total counts = 550.303000, observed total counts = 551.000000
[Sun May 27 23:58:43 2012] Offset between fit and detection position for source 31 = 2.342228 pixels
[Sun May 27 23:58:43 2012] Warning, changing simple spatial fit ID from 22 to 24
[Sun May 27 23:58:43 2012] 521.536000 total counts/ 257.195000 bgd. counts: snr = 16.482886
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 2.342228 pixels
  Position = (303.6, 365.6) = 11 4 40.85 38 16 8.4
  Extent = 18.6 (18.6-37.3)", rotation angle = 0
  Source counts = 264.3 +/- 22.8
  Background counts = 257.2
  Rate = 0.01 +/- 0.001
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:58:38 2012] XMMSAS src. selection expression = ellipse(26361.556000, 31759.318000, 1118.946032, 1118.946032, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing source region out to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src31_src.reg
[Mon May 28 02:58:38 2012] Extracting stamp from image fullrun_mos2_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (239, 301) - (368, 430)
[Mon May 28 02:58:38 2012] XMMSAS bgd. selection expression = annulus(26361.556000, 31759.318000, 1864.910054, 3729.820107, X, Y) && !ellipse(29492.121200, 27418.079400, 2940.744085, 2940.744085, 0.000000, X, Y) && !ellipse(28786.612946, 28942.468475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29425.800629, 29364.968597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.540000, 28706.096000, 459.399213, 459.399213, 0.000000, X, Y) && !ellipse(27659.162720, 28142.609039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24433.567800, 34224.714200, 527.926415, 527.926415, 0.000000, X, Y) && !ellipse(26728.359894, 27238.730865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24570.522000, 34075.334000, 1268.840037, 1268.840037, 0.000000, X, Y) && !ellipse(27418.378000, 30174.202000, 2352.760068, 2352.760068, 0.000000, X, Y) && !ellipse(27129.606000, 30763.098000, 2769.216080, 2769.216080, 0.000000, X, Y) && !ellipse(25272.810000, 33219.302000, 1552.968045, 1552.968045, 0.000000, X, Y) && !ellipse(26868.404000, 31174.434000, 769.468022, 769.468022, 0.000000, X, Y) && !ellipse(23890.520000, 35197.130000, 1699.912049, 1699.912049, 0.000000, X, Y) && !ellipse(25735.834000, 32640.280000, 1509.024043, 1509.024043, 0.000000, X, Y) && !ellipse(25451.630000, 27186.938000, 2240.736064, 2240.736064, 0.000000, X, Y) && !ellipse(25746.906000, 28782.107800, 2436.352070, 2436.352070, 0.000000, X, Y) && !ellipse(28245.452000, 30680.552800, 1358.944039, 1358.944039, 0.000000, X, Y) && !ellipse(26303.326000, 30124.277400, 1166.360034, 1166.360034, 0.000000, X, Y) && !ellipse(22781.260000, 36495.006000, 1564.488045, 1564.488045, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src31.gif
[Mon May 28 03:09:41 2012] Mean detx,y = (-2579.17, 2797.73) 
[Mon May 28 03:09:42 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:09:51 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:09:51 2012] Setting source spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon May 28 03:09:51 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Mon May 28 05:54:37 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:37 2012] Error reading totcts from fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Mon May 28 05:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:37 2012] Using photon index=1.80, rate=0.0138, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src31.arf
[Mon May 28 05:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:37 2012] Updating source flux to 1.5e-13
[Mon May 28 05:55:38 2012] Flag c found in src. 31 procflags, skipping spectral fitting