[Sun May 27 11:30:54 2012] Detection parameters:
  Position = (325.4, 329.3) = 11 4 32.77 38 13 29.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 569.7 +/- 35.2
  Background counts = 25.1
  Rate = 0.03 +/- 0.002

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 2.97'
[Sun May 27 15:07:36 2012] Using EEF radius (= 7.91 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 7.91"
[Sun May 27 15:07:36 2012] source mask rpix=1.8, npix_max = 21, mask sum = 23, frac = 1.069
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.91"
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src4.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src4.csv
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src4.csv
[Sun May 27 18:50:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May 27 18:50:11 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun May 27 18:50:40 2012] Warning, spatial fit 4 centroid is now closest to src. 35
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 2965.670000, observed total counts = 2936.000000
[Sun May 27 18:50:40 2012] Offset between fit and detection position for source 3 = 1.814642 pixels
[Sun May 27 18:50:40 2012] Warning, changing simple spatial fit ID from 4 to 5
[Sun May 27 18:50:40 2012] 2765.896000 total counts/ 2647.710000 bgd. counts: snr = 2.296840
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 1.814642 pixels
  Position = (324.1, 330.5) = 11 4 33.26 38 13 35.7
  Extent = 5.7 (3.2-10.1)", rotation angle = 0
  Source counts = 118.2 +/- 52.6
  Background counts = 2647.7
  Rate = 0.006 +/- 0.003
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:19:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 5.74"
[Sun May 27 21:19:35 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.906
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 5.74"
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src4.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src4.csv
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src4.csv
[Sun May 27 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sun May 27 23:58:43 2012] Warning, spatial fit 4 centroid is now closest to src. 2
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:58:43 2012] Source is confused with source 35
[Mon May 28 02:58:37 2012] XMMSAS src. selection expression = ellipse(28148.540000, 28706.096000, 344.549410, 344.549410, 0.000000, X, Y)
[Mon May 28 02:58:37 2012] Writing source region out to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src3_src.reg
[Mon May 28 02:58:37 2012] Extracting stamp from image fullrun_mos2_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (304, 311) - (344, 350)
[Mon May 28 02:58:37 2012] XMMSAS bgd. selection expression = annulus(28148.540000, 28706.096000, 574.249017, 1148.498033, X, Y) && !ellipse(29492.121200, 27418.079400, 2940.744085, 2940.744085, 0.000000, X, Y) && !ellipse(28786.612946, 28942.468475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29425.800629, 29364.968597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27659.162720, 28142.609039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26728.359894, 27238.730865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27418.378000, 30174.202000, 2352.760068, 2352.760068, 0.000000, X, Y) && !ellipse(27129.606000, 30763.098000, 2769.216080, 2769.216080, 0.000000, X, Y) && !ellipse(25451.630000, 27186.938000, 2240.736064, 2240.736064, 0.000000, X, Y) && !ellipse(25746.906000, 28782.107800, 2436.352070, 2436.352070, 0.000000, X, Y) && !ellipse(28245.452000, 30680.552800, 1358.944039, 1358.944039, 0.000000, X, Y) && !ellipse(26303.326000, 30124.277400, 1166.360034, 1166.360034, 0.000000, X, Y)
[Mon May 28 02:58:37 2012] Writing fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src3.gif
[Mon May 28 03:05:16 2012] Mean detx,y = (-2243.07, -732.84) 
[Mon May 28 03:05:16 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:05:22 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:05:22 2012] Setting source spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 03:05:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon May 28 05:54:37 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:37 2012] Error reading totcts from fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon May 28 05:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:37 2012] Using photon index=1.80, rate=0.00619, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src3.arf
[Mon May 28 05:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:37 2012] Updating source flux to 6.7e-14
[Mon May 28 05:55:38 2012] Flag c found in src. 3 procflags, skipping spectral fitting