[Sun May 27 11:30:55 2012] Detection parameters:
  Position = (292.1, 381.0) = 11 4 45.08 38 17 17.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.7 +/- 13.1
  Background counts = 17.1
  Rate = 0.006 +/- 0.0009

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 6.01'
[Sun May 27 15:07:36 2012] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 9.43"
[Sun May 27 15:07:36 2012] source mask rpix=2.2, npix_max = 28, mask sum = 36, frac = 1.264
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 9.43"
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src25.ximg exists
[Sun May 27 18:50:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src25.csv
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src25_1.ximg exists
[Sun May 27 18:50:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src25.csv
[Sun May 27 18:50:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Sun May 27 18:50:12 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 557.921000, observed total counts = 550.000000
[Sun May 27 18:50:40 2012] Offset between fit and detection position for source 29 = 1.722647 pixels
[Sun May 27 18:50:40 2012] Warning, changing simple spatial fit ID from 25 to 13
[Sun May 27 18:50:40 2012] 561.173600 total counts/ 86.463600 bgd. counts: snr = 51.051878
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 1.722647 pixels
  Position = (291.0, 382.3) = 11 4 45.50 38 17 21.1
  Extent = 19.4 (19.4-38.8)", rotation angle = 0
  Source counts = 474.7 +/- 23.7
  Background counts = 86.5
  Rate = 0.02 +/- 0.001
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 18:50:40 2012] Source is confused with source 28
[Sun May 27 21:19:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 19.41"
[Sun May 27 21:19:35 2012] source mask rpix=4.5, npix_max = 98, mask sum = 100, frac = 1.015
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 19.41"
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src23.ximg exists
[Sun May 27 23:58:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src23.csv
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src23_1.ximg exists
[Sun May 27 23:58:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src23.csv
[Sun May 27 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src23 appears to have run properly
[Sun May 27 23:58:43 2012] Spatial fit model total counts = 552.804000, observed total counts = 550.000000
[Sun May 27 23:58:43 2012] Offset between fit and detection position for source 29 = 0.095116 pixels
[Sun May 27 23:58:43 2012] Warning, changing simple spatial fit ID from 23 to 13
[Sun May 27 23:58:43 2012] 545.552400 total counts/ 35.134400 bgd. counts: snr = 86.111214
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.095116 pixels
  Position = (291.0, 382.4) = 11 4 45.47 38 17 21.4
  Extent = 19.4 (19.4-38.8)", rotation angle = 0
  Source counts = 510.4 +/- 23.4
  Background counts = 35.1
  Rate = 0.03 +/- 0.001
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:58:38 2012] XMMSAS src. selection expression = ellipse(25272.810000, 33219.302000, 1164.726034, 1164.726034, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing source region out to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src29_src.reg
[Mon May 28 02:58:38 2012] Extracting stamp from image fullrun_mos2_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (224, 315) - (358, 449)
[Mon May 28 02:58:38 2012] XMMSAS bgd. selection expression = annulus(25272.810000, 33219.302000, 1941.210056, 3882.420112, X, Y) && !ellipse(29492.121200, 27418.079400, 2940.744085, 2940.744085, 0.000000, X, Y) && !ellipse(28786.612946, 28942.468475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29425.800629, 29364.968597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24433.567800, 34224.714200, 527.926415, 527.926415, 0.000000, X, Y) && !ellipse(24570.522000, 34075.334000, 1268.840037, 1268.840037, 0.000000, X, Y) && !ellipse(27418.378000, 30174.202000, 2352.760068, 2352.760068, 0.000000, X, Y) && !ellipse(27129.606000, 30763.098000, 2769.216080, 2769.216080, 0.000000, X, Y) && !ellipse(26361.556000, 31759.318000, 1491.928043, 1491.928043, 0.000000, X, Y) && !ellipse(26868.404000, 31174.434000, 769.468022, 769.468022, 0.000000, X, Y) && !ellipse(23890.520000, 35197.130000, 1699.912049, 1699.912049, 0.000000, X, Y) && !ellipse(25735.834000, 32640.280000, 1509.024043, 1509.024043, 0.000000, X, Y) && !ellipse(25451.630000, 27186.938000, 2240.736064, 2240.736064, 0.000000, X, Y) && !ellipse(25746.906000, 28782.107800, 2436.352070, 2436.352070, 0.000000, X, Y) && !ellipse(28245.452000, 30680.552800, 1358.944039, 1358.944039, 0.000000, X, Y) && !ellipse(26303.326000, 30124.277400, 1166.360034, 1166.360034, 0.000000, X, Y) && !ellipse(22781.260000, 36495.006000, 1564.488045, 1564.488045, 0.000000, X, Y) && !ellipse(21356.828000, 38564.364000, 1879.992054, 1879.992054, 0.000000, X, Y) && !ellipse(20472.928000, 39870.496000, 3756.168108, 3756.168108, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src29.gif
[Mon May 28 03:09:54 2012] Mean detx,y = (-2567.63, 4685.71) 
[Mon May 28 03:09:55 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:10:22 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:10:22 2012] Setting source spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon May 28 03:10:22 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Mon May 28 05:54:37 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:37 2012] Error reading totcts from fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Mon May 28 05:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:37 2012] Using photon index=1.80, rate=0.0267, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src29.arf
[Mon May 28 05:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:37 2012] Updating source flux to 3.1e-13
[Mon May 28 05:55:38 2012] Flag c found in src. 29 procflags, skipping spectral fitting