[Sun May 27 11:30:55 2012] Detection parameters:
  Position = (287.4, 388.2) = 11 4 46.82 38 17 47.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 137.3 +/- 15.9
  Background counts = 16.4
  Rate = 0.009 +/- 0.001

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 6.55'
[Sun May 27 15:07:36 2012] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 9.71"
[Sun May 27 15:07:36 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.005
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 13 for pass 0, mean size = 9.71"
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src13.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src13.csv
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src13_1.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src13.csv
[Sun May 27 18:50:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sun May 27 18:50:12 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src13 appears to have run properly
[Sun May 27 18:50:40 2012] Warning, spatial fit 13 centroid is now closest to src. 29
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 18:50:40 2012] Source is confused with source 29
[Sun May 27 21:19:35 2012] Using EEF radius (= 9.71 ")to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 9.71"
[Sun May 27 21:19:35 2012] source mask rpix=2.2, npix_max = 29, mask sum = 30, frac = 1.005
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 9.71"
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src13.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src13.csv
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src13_1.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src13.csv
[Sun May 27 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sun May 27 23:58:43 2012] Warning, spatial fit 13 centroid is now closest to src. 29
[Sun May 27 23:58:43 2012] Spatial fit model total counts = 1029.730000, observed total counts = 1031.000000
[Sun May 27 23:58:43 2012] Offset between fit and detection position for source 28 = 6.412536 pixels
[Sun May 27 23:58:43 2012] Warning, changing simple spatial fit ID from 13 to 23
[Sun May 27 23:58:43 2012] 1021.246000 total counts/ 382.157000 bgd. counts: snr = 32.691920
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 6.412536 pixels
  Position = (283.0, 392.9) = 11 4 48.43 38 18 7.1
  Extent = 27.6 (20.3-36.8)", rotation angle = 0
  Source counts = 639.1 +/- 32.0
  Background counts = 382.2
  Rate = 0.03 +/- 0.002
[Sun May 27 23:58:43 2012] Spatial fit model total counts = 1021.640000, observed total counts = 981.000000
[Sun May 27 23:58:43 2012] Offset between fit and detection position for source 28 = 0.671188 pixels
[Sun May 27 23:58:43 2012] Warning, changing simple spatial fit ID from 23 to 25
[Sun May 27 23:58:43 2012] 1023.813000 total counts/ 611.609000 bgd. counts: snr = 16.667684
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 0.671188 pixels
  Position = (283.0, 392.2) = 11 4 48.45 38 18 4.2
  Extent = 15.9 (14.3-18.7)", rotation angle = 0
  Source counts = 412.2 +/- 32.0
  Background counts = 611.6
  Rate = 0.02 +/- 0.002
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:58:37 2012] XMMSAS src. selection expression = ellipse(24570.522000, 34075.334000, 951.630027, 951.630027, 0.000000, X, Y)
[Mon May 28 02:58:37 2012] Writing source region out to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src28_src.reg
[Mon May 28 02:58:37 2012] Extracting stamp from image fullrun_mos2_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (228, 338) - (338, 447)
[Mon May 28 02:58:37 2012] XMMSAS bgd. selection expression = annulus(24570.522000, 34075.334000, 1586.050046, 3172.100091, X, Y) && !ellipse(24433.567800, 34224.714200, 527.926415, 527.926415, 0.000000, X, Y) && !ellipse(27418.378000, 30174.202000, 2352.760068, 2352.760068, 0.000000, X, Y) && !ellipse(27129.606000, 30763.098000, 2769.216080, 2769.216080, 0.000000, X, Y) && !ellipse(26361.556000, 31759.318000, 1491.928043, 1491.928043, 0.000000, X, Y) && !ellipse(25272.810000, 33219.302000, 1552.968045, 1552.968045, 0.000000, X, Y) && !ellipse(26868.404000, 31174.434000, 769.468022, 769.468022, 0.000000, X, Y) && !ellipse(23890.520000, 35197.130000, 1699.912049, 1699.912049, 0.000000, X, Y) && !ellipse(25735.834000, 32640.280000, 1509.024043, 1509.024043, 0.000000, X, Y) && !ellipse(25746.906000, 28782.107800, 2436.352070, 2436.352070, 0.000000, X, Y) && !ellipse(28245.452000, 30680.552800, 1358.944039, 1358.944039, 0.000000, X, Y) && !ellipse(26303.326000, 30124.277400, 1166.360034, 1166.360034, 0.000000, X, Y) && !ellipse(22781.260000, 36495.006000, 1564.488045, 1564.488045, 0.000000, X, Y) && !ellipse(21356.828000, 38564.364000, 1879.992054, 1879.992054, 0.000000, X, Y) && !ellipse(20472.928000, 39870.496000, 3756.168108, 3756.168108, 0.000000, X, Y)
[Mon May 28 02:58:37 2012] Writing fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src28.gif
[Mon May 28 03:06:43 2012] Mean detx,y = (-2523.35, 5673.07) 
[Mon May 28 03:06:44 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:07:01 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:07:02 2012] Setting source spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Mon May 28 03:07:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Mon May 28 05:54:37 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:37 2012] Error reading totcts from fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Mon May 28 05:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:37 2012] Using photon index=1.80, rate=0.0216, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src28.arf
[Mon May 28 05:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:37 2012] Updating source flux to 2.8e-13
[Mon May 28 05:55:38 2012] Flag c found in src. 28 procflags, skipping spectral fitting