[Sun May 27 11:30:55 2012] Detection parameters:
  Position = (275.7, 403.8) = 11 4 51.14 38 18 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.7 +/- 10.1
  Background counts = 13.8
  Rate = 0.005 +/- 0.0009

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 7.81'
[Sun May 27 15:07:36 2012] Using EEF radius (= 10.34 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 10.34"
[Sun May 27 15:07:36 2012] source mask rpix=2.4, npix_max = 33, mask sum = 28, frac = 0.846
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 10.34"
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src27.ximg exists
[Sun May 27 18:50:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src27.csv
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun May 27 18:50:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src27.csv
[Sun May 27 18:50:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun May 27 18:50:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun May 27 18:50:12 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun May 27 18:50:12 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:40 2012] Warning, spatial fit 27 centroid is now closest to src. 26
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 268.736000, observed total counts = 256.000000
[Sun May 27 18:50:40 2012] Offset between fit and detection position for source 27 = 1.441989 pixels
[Sun May 27 18:50:40 2012] Warning, changing simple spatial fit ID from 27 to 31
[Sun May 27 18:50:40 2012] 224.755796 total counts/ 0.134796 bgd. counts: snr = 611.803355
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 1.441989 pixels
  Position = (275.2, 405.1) = 11 4 51.34 38 19 0.3
  Extent = 21.2 (21.2-42.5)", rotation angle = 0
  Source counts = 224.6 +/- 15.0
  Background counts = 0.1
  Rate = 0.01 +/- 0.0008
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 18:50:40 2012] Source is confused with source 13
[Sun May 27 21:19:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 21.25"
[Sun May 27 21:19:35 2012] source mask rpix=4.9, npix_max = 115, mask sum = 87, frac = 0.750
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 21.25"
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src25.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src25.csv
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src25_1.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src25.csv
[Sun May 27 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sun May 27 23:58:43 2012] Warning, spatial fit 25 centroid is now closest to src. 28
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:58:38 2012] XMMSAS src. selection expression = ellipse(23890.520000, 35197.130000, 1274.934037, 1274.934037, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing source region out to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src27_src.reg
[Mon May 28 02:58:38 2012] Extracting stamp from image fullrun_mos2_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (202, 332) - (348, 478)
[Mon May 28 02:58:38 2012] XMMSAS bgd. selection expression = annulus(23890.520000, 35197.130000, 2124.890061, 4249.780122, X, Y) && !ellipse(24433.567800, 34224.714200, 527.926415, 527.926415, 0.000000, X, Y) && !ellipse(24570.522000, 34075.334000, 1268.840037, 1268.840037, 0.000000, X, Y) && !ellipse(27418.378000, 30174.202000, 2352.760068, 2352.760068, 0.000000, X, Y) && !ellipse(27129.606000, 30763.098000, 2769.216080, 2769.216080, 0.000000, X, Y) && !ellipse(26361.556000, 31759.318000, 1491.928043, 1491.928043, 0.000000, X, Y) && !ellipse(25272.810000, 33219.302000, 1552.968045, 1552.968045, 0.000000, X, Y) && !ellipse(26868.404000, 31174.434000, 769.468022, 769.468022, 0.000000, X, Y) && !ellipse(25735.834000, 32640.280000, 1509.024043, 1509.024043, 0.000000, X, Y) && !ellipse(25746.906000, 28782.107800, 2436.352070, 2436.352070, 0.000000, X, Y) && !ellipse(28245.452000, 30680.552800, 1358.944039, 1358.944039, 0.000000, X, Y) && !ellipse(26303.326000, 30124.277400, 1166.360034, 1166.360034, 0.000000, X, Y) && !ellipse(22781.260000, 36495.006000, 1564.488045, 1564.488045, 0.000000, X, Y) && !ellipse(21356.828000, 38564.364000, 1879.992054, 1879.992054, 0.000000, X, Y) && !ellipse(20472.928000, 39870.496000, 3756.168108, 3756.168108, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src27.gif
[Mon May 28 03:10:34 2012] Mean detx,y = (-2564.08, 6855.82) 
[Mon May 28 03:10:35 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:11:07 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:11:07 2012] Setting source spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon May 28 03:11:07 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Mon May 28 05:54:37 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:37 2012] Error reading totcts from fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Mon May 28 05:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:37 2012] Using photon index=1.80, rate=0.0118, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src27.arf
[Mon May 28 05:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:37 2012] Updating source flux to 1.7e-13
[Mon May 28 05:55:38 2012] Flag c found in src. 27 procflags, skipping spectral fitting