[Sun May 27 11:30:55 2012] Detection parameters:
  Position = (364.3, 429.9) = 11 4 18.39 38 20 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 86.5 +/- 12.0
  Background counts = 9.0
  Rate = 0.008 +/- 0.001

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 10.66'
[Sun May 27 15:07:36 2012] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 11.76"
[Sun May 27 15:07:36 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.877
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 11.76"
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src16.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src16.csv
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src16_1.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src16.csv
[Sun May 27 18:50:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Sun May 27 18:50:12 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 151.679000, observed total counts = 152.000000
[Sun May 27 18:50:40 2012] Offset between fit and detection position for source 22 = 0.190169 pixels
[Sun May 27 18:50:40 2012] 149.118700 total counts/ 90.613100 bgd. counts: snr = 6.146133
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.190169 pixels
  Position = (364.1, 429.9) = 11 4 18.47 38 20 48.0
  Extent = 4.6 (3.7-6.1)", rotation angle = 0
  Source counts = 58.5 +/- 12.2
  Background counts = 90.6
  Rate = 0.003 +/- 0.0006
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:19:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 4.60"
[Sun May 27 21:19:35 2012] source mask rpix=1.1, npix_max = 9, mask sum = 9, frac = 0.928
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 4.60"
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src16.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src16.csv
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src16_1.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src16.csv
[Sun May 27 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Sun May 27 23:58:43 2012] Spatial fit model total counts = 145.000000, observed total counts = 145.000000
[Sun May 27 23:58:43 2012] Offset between fit and detection position for source 22 = 0.029173 pixels
[Sun May 27 23:58:43 2012] 141.396200 total counts/ 82.990100 bgd. counts: snr = 6.411285
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 0.029173 pixels
  Position = (364.1, 429.9) = 11 4 18.46 38 20 48.1
  Extent = 4.6 (3.6-6.0)", rotation angle = 0
  Source counts = 58.4 +/- 11.9
  Background counts = 83.0
  Rate = 0.003 +/- 0.0006
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:58:43 2012] Deleting source due to low Poisson probability 0.9