[Sun May 27 11:30:55 2012] Detection parameters:
  Position = (249.7, 436.9) = 11 5 0.76 38 21 19.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 53.4 +/- 10.4
  Background counts = 10.5
  Rate = 0.003 +/- 0.0005

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 10.64'
[Sun May 27 15:07:36 2012] Using EEF radius (= 11.75 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 11.75"
[Sun May 27 15:07:36 2012] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.878
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 46 for pass 0, mean size = 11.75"
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src46.ximg exists
[Sun May 27 18:50:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src46.csv
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src46_1.ximg exists
[Sun May 27 18:50:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src46.csv
[Sun May 27 18:50:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Sun May 27 18:50:12 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src46 appears to have run properly
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 222.885000, observed total counts = 223.000000
[Sun May 27 18:50:40 2012] Offset between fit and detection position for source 21 = 7.831402 pixels
[Sun May 27 18:50:40 2012] 216.932900 total counts/ 27.749900 bgd. counts: snr = 35.912976
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 7.831402 pixels
  Position = (246.0, 443.8) = 11 5 2.12 38 21 48.5
  Extent = 23.5 (20.0-47.0)", rotation angle = 0
  Source counts = 189.2 +/- 14.7
  Background counts = 27.7
  Rate = 0.01 +/- 0.0008
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:19:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 23.50"
[Sun May 27 21:19:35 2012] source mask rpix=5.4, npix_max = 139, mask sum = 144, frac = 1.033
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 23.50"
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src35.ximg exists
[Sun May 27 23:58:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src35.csv
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src35_1.ximg exists
[Sun May 27 23:58:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src35.csv
[Sun May 27 23:58:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Sun May 27 23:58:43 2012] Warning, spatial fit 35 centroid is now closest to src. 18
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:58:43 2012] Source is confused with source 18
[Mon May 28 02:58:38 2012] XMMSAS src. selection expression = ellipse(21356.828000, 38564.364000, 1409.994041, 1409.994041, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing source region out to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src21_src.reg
[Mon May 28 02:58:38 2012] Extracting stamp from image fullrun_mos2_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (165, 363) - (327, 525)
[Mon May 28 02:58:38 2012] XMMSAS bgd. selection expression = annulus(21356.828000, 38564.364000, 2349.990068, 4699.980135, X, Y) && !ellipse(24433.567800, 34224.714200, 527.926415, 527.926415, 0.000000, X, Y) && !ellipse(24570.522000, 34075.334000, 1268.840037, 1268.840037, 0.000000, X, Y) && !ellipse(25272.810000, 33219.302000, 1552.968045, 1552.968045, 0.000000, X, Y) && !ellipse(23890.520000, 35197.130000, 1699.912049, 1699.912049, 0.000000, X, Y) && !ellipse(25735.834000, 32640.280000, 1509.024043, 1509.024043, 0.000000, X, Y) && !ellipse(22781.260000, 36495.006000, 1564.488045, 1564.488045, 0.000000, X, Y) && !ellipse(20472.928000, 39870.496000, 3756.168108, 3756.168108, 0.000000, X, Y) && !ellipse(18348.712000, 42610.000000, 1728.168050, 1728.168050, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src21.gif
[Mon May 28 03:13:21 2012] Mean detx,y = (-2538.58, 11281.38) 
[Mon May 28 03:13:22 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:13:40 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:13:40 2012] Setting source spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon May 28 03:13:40 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src21_bgd.pi.gz
[Mon May 28 05:54:37 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:37 2012] Error reading totcts from fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src21_src_b10.pi.gz
[Mon May 28 05:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:37 2012] Using photon index=1.80, rate=0.00991, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src21.arf
[Mon May 28 05:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:37 2012] Updating source flux to 1.8e-13
[Mon May 28 05:55:38 2012] Flag c found in src. 21 procflags, skipping spectral fitting