[Sun May 27 11:30:54 2012] Detection parameters:
  Position = (237.5, 455.8) = 11 5 5.29 38 22 42.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.4 +/- 10.3
  Background counts = 10.7
  Rate = 0.003 +/- 0.0005

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 12.24'
[Sun May 27 15:07:36 2012] Using EEF radius (= 12.55 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 12.55"
[Sun May 27 15:07:36 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.070
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 50 for pass 0, mean size = 12.55"
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src50.ximg exists
[Sun May 27 18:50:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src50.csv
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src50_1.ximg exists
[Sun May 27 18:50:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src50.csv
[Sun May 27 18:50:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src50.ximg exists
[Sun May 27 18:50:12 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src50_1.ximg exists
[Sun May 27 18:50:12 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src50 appears to have run properly
[Sun May 27 18:50:40 2012] Warning, spatial fit 50 centroid is now closest to src. 20
[Sun May 27 18:50:40 2012] Source 18 is offset by -2.462773 and 0.182274 pixels which is larger than
2 X fitted extent = 1.494428 x 1.494428, not incorporating fit results
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 212.826000, observed total counts = 215.000000
[Sun May 27 18:50:40 2012] Offset between fit and detection position for source 18 = 2.885605 pixels
[Sun May 27 18:50:40 2012] Warning, changing simple spatial fit ID from 50 to 57
[Sun May 27 18:50:40 2012] 211.888793 total counts/ 0.067793 bgd. counts: snr = 813.535047
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 2.885605 pixels
  Position = (234.7, 456.8) = 11 5 6.30 38 22 44.8
  Extent = 21.9 (20.1-24.7)", rotation angle = 0
  Source counts = 211.8 +/- 14.6
  Background counts = 0.1
  Rate = 0.01 +/- 0.0008
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:19:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 21.93"
[Sun May 27 21:19:35 2012] source mask rpix=5.0, npix_max = 122, mask sum = 121, frac = 0.985
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 21.93"
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src37.ximg exists
[Sun May 27 23:58:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src37.csv
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src37_1.ximg exists
[Sun May 27 23:58:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src37.csv
[Sun May 27 23:58:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src37 appears to have run properly
[Sun May 27 23:58:43 2012] Spatial fit model total counts = 589.295000, observed total counts = 592.000000
[Sun May 27 23:58:43 2012] Offset between fit and detection position for source 18 = 2.365207 pixels
[Sun May 27 23:58:43 2012] Warning, changing simple spatial fit ID from 37 to 35
[Sun May 27 23:58:43 2012] 578.944900 total counts/ 92.366900 bgd. counts: snr = 50.628410
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 2.365207 pixels
  Position = (235.9, 458.8) = 11 5 5.88 38 22 53.8
  Extent = 47.0 (46.9-47.0)", rotation angle = 0
  Source counts = 486.6 +/- 24.1
  Background counts = 92.4
  Rate = 0.03 +/- 0.001
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 23:58:43 2012] Source is confused with source 21
[Mon May 28 02:58:38 2012] XMMSAS src. selection expression = ellipse(20472.928000, 39870.496000, 2817.126081, 2817.126081, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing source region out to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src18_src.reg
[Mon May 28 02:58:38 2012] Extracting stamp from image fullrun_mos2_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (74, 297) - (398, 595)
[Mon May 28 02:58:38 2012] XMMSAS bgd. selection expression = annulus(20472.928000, 39870.496000, 4695.210135, 9390.420270, X, Y) && !ellipse(24433.567800, 34224.714200, 527.926415, 527.926415, 0.000000, X, Y) && !ellipse(24570.522000, 34075.334000, 1268.840037, 1268.840037, 0.000000, X, Y) && !ellipse(27418.378000, 30174.202000, 2352.760068, 2352.760068, 0.000000, X, Y) && !ellipse(27129.606000, 30763.098000, 2769.216080, 2769.216080, 0.000000, X, Y) && !ellipse(26361.556000, 31759.318000, 1491.928043, 1491.928043, 0.000000, X, Y) && !ellipse(25272.810000, 33219.302000, 1552.968045, 1552.968045, 0.000000, X, Y) && !ellipse(26868.404000, 31174.434000, 769.468022, 769.468022, 0.000000, X, Y) && !ellipse(23890.520000, 35197.130000, 1699.912049, 1699.912049, 0.000000, X, Y) && !ellipse(25735.834000, 32640.280000, 1509.024043, 1509.024043, 0.000000, X, Y) && !ellipse(25746.906000, 28782.107800, 2436.352070, 2436.352070, 0.000000, X, Y) && !ellipse(28245.452000, 30680.552800, 1358.944039, 1358.944039, 0.000000, X, Y) && !ellipse(26303.326000, 30124.277400, 1166.360034, 1166.360034, 0.000000, X, Y) && !ellipse(22781.260000, 36495.006000, 1564.488045, 1564.488045, 0.000000, X, Y) && !ellipse(21356.828000, 38564.364000, 1879.992054, 1879.992054, 0.000000, X, Y) && !ellipse(18348.712000, 42610.000000, 1728.168050, 1728.168050, 0.000000, X, Y)
[Mon May 28 02:58:38 2012] Writing fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src18.gif
[Mon May 28 03:14:12 2012] Mean detx,y = (-2581.81, 12703.09) 
[Mon May 28 03:14:13 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:15:38 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:15:38 2012] Setting source spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon May 28 03:15:38 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Mon May 28 05:54:37 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:37 2012] Error reading totcts from fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Mon May 28 05:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:37 2012] Using photon index=1.80, rate=0.0255, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src18.arf
[Mon May 28 05:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:37 2012] Updating source flux to 4.7e-13
[Mon May 28 05:55:38 2012] Flag b found in src. 18 procflags, skipping spectral fitting
[Mon May 28 05:55:38 2012] Flag c found in src. 18 procflags, skipping spectral fitting