[Sun May 27 11:30:54 2012] Detection parameters:
  Position = (329.1, 285.8) = 11 4 31.43 38 10 24.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 222.4 +/- 21.1
  Background counts = 27.9
  Rate = 0.01 +/- 0.001

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 2.40'
[Sun May 27 15:07:36 2012] Using EEF radius (= 7.63 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 7.63"
[Sun May 27 15:07:36 2012] source mask rpix=1.8, npix_max = 20, mask sum = 15, frac = 0.738
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 7.63"
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src11.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src11.csv
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src11.csv
[Sun May 27 18:50:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May 27 18:50:11 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 1757.450000, observed total counts = 2323.000000
[Sun May 27 18:50:40 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May 27 18:50:40 2012] Source 11 is offset by -2.132484 and -7.437567 pixels which is larger than
2 X fitted extent = 2.398262 x 2.398262, not incorporating fit results
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 799.477000, observed total counts = 753.000000
[Sun May 27 18:50:40 2012] Offset between fit and detection position for source 11 = 1.272567 pixels
[Sun May 27 18:50:40 2012] Warning, changing simple spatial fit ID from 11 to 19
[Sun May 27 18:50:40 2012] 827.821000 total counts/ 707.418000 bgd. counts: snr = 4.526883
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.272567 pixels
  Position = (329.4, 287.0) = 11 4 31.32 38 10 26.6
  Extent = 6.1 (4.4-9.5)", rotation angle = 0
  Source counts = 120.4 +/- 28.8
  Background counts = 707.4
  Rate = 0.006 +/- 0.002
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:19:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 6.13"
[Sun May 27 21:19:35 2012] source mask rpix=1.4, npix_max = 14, mask sum = 14, frac = 0.961
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 6.13"
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src11.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src11.csv
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src11.csv
[Sun May 27 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun May 27 23:58:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun May 27 23:58:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src11.csv
[Sun May 27 23:58:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:43 2012] Warning, spatial fit 11 centroid is now closest to src. 45
[Sun May 27 23:58:43 2012] Spatial fit model total counts = 796.861000, observed total counts = 753.000000
[Sun May 27 23:58:43 2012] Offset between fit and detection position for source 11 = 0.046223 pixels
[Sun May 27 23:58:43 2012] Warning, changing simple spatial fit ID from 11 to 19
[Sun May 27 23:58:43 2012] 824.599000 total counts/ 706.255000 bgd. counts: snr = 4.453131
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 0.046223 pixels
  Position = (329.4, 287.0) = 11 4 31.33 38 10 26.4
  Extent = 6.0 (4.4-9.5)", rotation angle = 0
  Source counts = 118.3 +/- 28.7
  Background counts = 706.3
  Rate = 0.006 +/- 0.002
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:58:37 2012] XMMSAS src. selection expression = ellipse(28607.362000, 24919.856000, 361.389010, 361.389010, 0.000000, X, Y)
[Mon May 28 02:58:37 2012] Writing source region out to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src11_src.reg
[Mon May 28 02:58:37 2012] Extracting stamp from image fullrun_mos2_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (309, 266) - (350, 308)
[Mon May 28 02:58:37 2012] XMMSAS bgd. selection expression = annulus(28607.362000, 24919.856000, 602.315017, 1204.630035, X, Y) && !ellipse(29492.121200, 27418.079400, 2940.744085, 2940.744085, 0.000000, X, Y) && !ellipse(27735.790000, 25451.112000, 709.105620, 709.105620, 0.000000, X, Y) && !ellipse(27417.555054, 26367.727264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28221.540405, 24332.835815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27268.398163, 25099.002930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29341.293701, 24765.090515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25451.630000, 27186.938000, 2240.736064, 2240.736064, 0.000000, X, Y)
[Mon May 28 02:58:37 2012] Writing fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src11.gif
[Mon May 28 03:06:26 2012] Mean detx,y = (-373.95, -3997.20) 
[Mon May 28 03:06:26 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:06:32 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:06:32 2012] Setting source spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May 28 03:06:32 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Mon May 28 05:54:37 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:37 2012] Error reading totcts from fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Mon May 28 05:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:37 2012] Using photon index=1.80, rate=0.0062, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src11.arf
[Mon May 28 05:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:37 2012] Updating source flux to 7.4e-14
[Mon May 28 05:55:38 2012] Flag b found in src. 11 procflags, skipping spectral fitting
[Mon May 28 05:55:38 2012] Flag p found in src. 11 procflags, skipping spectral fitting