[Sun May 27 11:30:54 2012] Detection parameters:
  Position = (339.9, 315.9) = 11 4 27.42 38 12 32.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 125752.9 +/- 426.0
  Background counts = 26.8
  Rate = 7 +/- 0.02

[Sun May 27 11:30:57 2012] Off-axis axis estimate = 3.27'
[Sun May 27 15:07:36 2012] Using EEF radius (= 8.06 ")to estimate initial spatial extent for simple fitting
[Sun May 27 15:07:36 2012] Initial guess for spatial extent in simple fitting = 8.06"
[Sun May 27 15:07:36 2012] source mask rpix=1.9, npix_max = 22, mask sum = 16, frac = 0.722
[Sun May 27 15:07:36 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.06"
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src1.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src1.csv
[Sun May 27 18:50:10 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun May 27 18:50:10 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src1.csv
[Sun May 27 18:50:10 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun May 27 18:50:11 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun May 27 18:50:11 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun May 27 18:50:40 2012] Spatial fit model total counts = 179930.000000, observed total counts = 181350.000000
[Sun May 27 18:50:40 2012] Offset between fit and detection position for source 1 = 0.393853 pixels
[Sun May 27 18:50:40 2012] 179392.000000 total counts/ 25600.000000 bgd. counts: snr = 961.200000
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.393853 pixels
  Position = (339.6, 315.7) = 11 4 27.54 38 12 31.3
  Extent = 12.0 (12.0-12.1)", rotation angle = 0
  Source counts = 153792.0 +/- 423.5
  Background counts = 25600.0
  Rate = 8 +/- 0.02
[Sun May 27 18:50:40 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:40 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:40 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:40 2012] Source does appear to be extended
[Sun May 27 18:50:40 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 21:19:35 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 21:19:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 21:19:35 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Sun May 27 21:19:35 2012] source mask rpix=2.8, npix_max = 42, mask sum = 49, frac = 1.149
[Sun May 27 21:19:35 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.03"
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src1.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src1.csv
[Sun May 27 23:58:31 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun May 27 23:58:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src1.csv
[Sun May 27 23:58:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun May 27 23:58:32 2012] fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun May 27 23:58:32 2012] Fit fullrun_mos2_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sun May 27 23:58:43 2012] Spatial fit model total counts = 203069.000000, observed total counts = 202824.000000
[Sun May 27 23:58:43 2012] Offset between fit and detection position for source 1 = 0.077339 pixels
[Sun May 27 23:58:43 2012] 202953.500000 total counts/ 45038.500000 bgd. counts: snr = 744.100208
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.077339 pixels
  Position = (339.5, 315.7) = 11 4 27.57 38 12 31.3
  Extent = 12.3 (12.2-12.3)", rotation angle = 0
  Source counts = 157915.0 +/- 450.5
  Background counts = 45038.5
  Rate = 8 +/- 0.02
[Sun May 27 23:58:43 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:43 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:43 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:43 2012] Source does appear to be extended
[Sun May 27 23:58:43 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 02:58:37 2012] Counts = 157915.000000, rescaling region sizes by 3.000000
[Mon May 28 02:58:37 2012] XMMSAS src. selection expression = ellipse(29492.121200, 27418.079400, 2205.558063, 2205.558063, 0.000000, X, Y)
[Mon May 28 02:58:37 2012] Writing source region out to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src1_src.reg
[Mon May 28 02:58:37 2012] Extracting stamp from image fullrun_mos2_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (213, 189) - (466, 442)
[Mon May 28 02:58:37 2012] XMMSAS bgd. selection expression = annulus(29492.121200, 27418.079400, 11027.790317, 22055.580635, X, Y) && !ellipse(28786.612946, 28942.468475, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29425.800629, 29364.968597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28148.540000, 28706.096000, 459.399213, 459.399213, 0.000000, X, Y) && !ellipse(27659.162720, 28142.609039, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27735.790000, 25451.112000, 709.105620, 709.105620, 0.000000, X, Y) && !ellipse(27417.555054, 26367.727264, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32209.335999, 26409.352814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24433.567800, 34224.714200, 527.926415, 527.926415, 0.000000, X, Y) && !ellipse(26728.359894, 27238.730865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28607.362000, 24919.856000, 481.852014, 481.852014, 0.000000, X, Y) && !ellipse(25413.549200, 25546.335400, 441.503213, 441.503213, 0.000000, X, Y) && !ellipse(24570.522000, 34075.334000, 1268.840037, 1268.840037, 0.000000, X, Y) && !ellipse(31727.413200, 24300.034600, 620.215218, 620.215218, 0.000000, X, Y) && !ellipse(25973.430000, 25926.498000, 1067.376031, 1067.376031, 0.000000, X, Y) && !ellipse(27418.378000, 30174.202000, 2352.760068, 2352.760068, 0.000000, X, Y) && !ellipse(28221.540405, 24332.835815, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27129.606000, 30763.098000, 2769.216080, 2769.216080, 0.000000, X, Y) && !ellipse(27268.398163, 25099.002930, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26361.556000, 31759.318000, 1491.928043, 1491.928043, 0.000000, X, Y) && !ellipse(25272.810000, 33219.302000, 1552.968045, 1552.968045, 0.000000, X, Y) && !ellipse(26868.404000, 31174.434000, 769.468022, 769.468022, 0.000000, X, Y) && !ellipse(23890.520000, 35197.130000, 1699.912049, 1699.912049, 0.000000, X, Y) && !ellipse(25735.834000, 32640.280000, 1509.024043, 1509.024043, 0.000000, X, Y) && !ellipse(29341.293701, 24765.090515, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25451.630000, 27186.938000, 2240.736064, 2240.736064, 0.000000, X, Y) && !ellipse(25746.906000, 28782.107800, 2436.352070, 2436.352070, 0.000000, X, Y) && !ellipse(28245.452000, 30680.552800, 1358.944039, 1358.944039, 0.000000, X, Y) && !ellipse(26303.326000, 30124.277400, 1166.360034, 1166.360034, 0.000000, X, Y) && !ellipse(22781.260000, 36495.006000, 1564.488045, 1564.488045, 0.000000, X, Y) && !ellipse(21356.828000, 38564.364000, 1879.992054, 1879.992054, 0.000000, X, Y) && !ellipse(32695.012000, 24993.600000, 1441.392041, 1441.392041, 0.000000, X, Y) && !ellipse(20472.928000, 39870.496000, 3756.168108, 3756.168108, 0.000000, X, Y) && !ellipse(18348.712000, 42610.000000, 1728.168050, 1728.168050, 0.000000, X, Y)
[Mon May 28 02:58:37 2012] Writing fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src1.gif
[Mon May 28 02:58:48 2012] Mean detx,y = (-2557.71, -2526.28) 
[Mon May 28 02:58:49 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 03:04:53 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 03:04:53 2012] Setting source spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 03:04:53 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Mon May 28 05:54:37 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:37 2012] Error reading totcts from fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Mon May 28 05:54:37 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:37 2012] Using photon index=1.80, rate=8.27, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src1.arf
[Mon May 28 05:54:37 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:37 2012] Updating source flux to 7.1e-11
[Mon May 28 05:57:34 2012] Reading fit data from xmm0153950701/analysis//spectral/fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src1_pl.csv
[Mon May 28 05:57:34 2012] Spectral fit parameter nH value = 3.97881e+20
[Mon May 28 05:57:34 2012] Spectral fit parameter PhoIndex value = 2.7485
[Mon May 28 05:57:34 2012] Failed to get F(0.3-8.0) from xmm0153950701/analysis//spectral/fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Mon May 28 05:57:34 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:57:34 2012] Using Nh = 4e+20, photon index=2.75, rate=8.27, arf fullrun_mos2_xmm0153950701_pi300-10000_pass1_cl_src1.arf
[Mon May 28 05:57:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:57:34 2012] Updating source flux to 5.4e-11