[Sun May 27 11:30:15 2012] Detection parameters:
  Position = (403.2, 334.6) = 11 4 4.06 38 13 51.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.2 +/- 12.3
  Background counts = 9.4
  Rate = 0.01 +/- 0.001

[Sun May 27 11:30:17 2012] Off-axis axis estimate = 8.04'
[Sun May 27 12:55:35 2012] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Sun May 27 12:55:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 12:55:35 2012] Initial guess for spatial extent in simple fitting = 10.45"
[Sun May 27 12:55:35 2012] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.713
[Sun May 27 12:55:35 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.45"
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src9.ximg exists
[Sun May 27 15:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src9.csv
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src9_1.ximg exists
[Sun May 27 15:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src9.csv
[Sun May 27 15:07:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sun May 27 15:07:35 2012] Fit fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Sun May 27 18:50:28 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 10.861750 pixels away
[Sun May 27 18:50:28 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:28 2012] Assessing source extent using major
[Sun May 27 18:50:28 2012] Source does appear to be extended
[Sun May 27 18:50:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 19:55:20 2012] Using EEF radius (= 10.45 ")to estimate initial spatial extent for simple fitting
[Sun May 27 19:55:20 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 19:55:20 2012] Initial guess for spatial extent in simple fitting = 10.45"
[Sun May 27 19:55:20 2012] source mask rpix=2.4, npix_max = 33, mask sum = 24, frac = 0.713
[Sun May 27 19:55:20 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 10.45"
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src9.ximg exists
[Sun May 27 21:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src9.csv
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src9_1.ximg exists
[Sun May 27 21:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src9.csv
[Sun May 27 21:19:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sun May 27 21:19:34 2012] Fit fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sun May 27 23:58:38 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 10.677103 pixels away
[Sun May 27 23:58:38 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:38 2012] Assessing source extent using major
[Sun May 27 23:58:38 2012] Source does appear to be extended
[Sun May 27 23:58:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 01:25:50 2012] XMMSAS src. selection expression = ellipse(35029.476257, 29065.996368, 652.500000, 652.500000, 0.000000, X, Y)
[Mon May 28 01:25:50 2012] Writing source region out to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src8_src.reg
[Mon May 28 01:25:50 2012] Extracting stamp from image fullrun_mos1_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (366, 297) - (441, 372)
[Mon May 28 01:25:50 2012] XMMSAS bgd. selection expression = annulus(35029.476257, 29065.996368, 1087.500000, 2175.000000, X, Y)
[Mon May 28 01:25:50 2012] Writing fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src8.gif
[Mon May 28 01:34:11 2012] Mean detx,y = (-4334.31, 7792.69) 
[Mon May 28 01:34:12 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 01:34:29 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 01:34:29 2012] Setting source spectrum file to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon May 28 01:34:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Mon May 28 02:14:43 2012] Not generating rmf since there are only 93 counts
[Mon May 28 02:14:43 2012] rmf not generated due to insufficient counts
[Mon May 28 05:54:36 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:36 2012] Error reading totcts from fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Mon May 28 05:54:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:36 2012] Using photon index=1.80, rate=0.00951, arf fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src8.arf
[Mon May 28 05:54:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:36 2012] Updating source flux to 1.9e-13
[Mon May 28 05:54:38 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting