[Sun May 27 11:30:17 2012] Detection parameters:
  Position = (270.9, 264.9) = 11 4 52.89 38 8 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.5 +/- 10.5
  Background counts = 10.1
  Rate = 0.004 +/- 0.0007

[Sun May 27 11:30:17 2012] Off-axis axis estimate = 3.14'
[Sun May 27 12:55:35 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Sun May 27 12:55:35 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Sun May 27 12:55:35 2012] source mask rpix=1.8, npix_max = 21, mask sum = 16, frac = 0.731
[Sun May 27 12:55:35 2012] Giving source the simple spatial ID 20 for pass 0, mean size = 8.00"
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src20.ximg exists
[Sun May 27 15:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src20.csv
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src20_1.ximg exists
[Sun May 27 15:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src20.csv
[Sun May 27 15:07:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 15:07:36 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src20.ximg exists
[Sun May 27 15:07:36 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src20_1.ximg exists
[Sun May 27 15:07:36 2012] Fit fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src20 appears to have run properly
[Sun May 27 18:50:28 2012] Warning, spatial fit 20 centroid is now closest to src. 44
[Sun May 27 18:50:28 2012] Spatial fit model total counts = 261.919000, observed total counts = 262.000000
[Sun May 27 18:50:28 2012] Offset between fit and detection position for source 43 = 3.321826 pixels
[Sun May 27 18:50:28 2012] Warning, changing simple spatial fit ID from 20 to 21
[Sun May 27 18:50:28 2012] 279.342000 total counts/ 167.059000 bgd. counts: snr = 8.687185
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 3.321826 pixels
  Position = (273.1, 267.4) = 11 4 52.08 38 9 1.3
  Extent = 15.3 (13.4-30.6)", rotation angle = 0
  Source counts = 112.3 +/- 16.7
  Background counts = 167.1
  Rate = 0.006 +/- 0.0009
[Sun May 27 18:50:28 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:28 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:28 2012] Source does appear to be extended
[Sun May 27 18:50:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 18:50:28 2012] Source is confused with source 44
[Sun May 27 19:55:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 19:55:20 2012] Initial guess for spatial extent in simple fitting = 15.31"
[Sun May 27 19:55:20 2012] source mask rpix=3.5, npix_max = 64, mask sum = 64, frac = 0.990
[Sun May 27 19:55:20 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 15.31"
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src17.ximg exists
[Sun May 27 21:19:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src17.csv
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src17_1.ximg exists
[Sun May 27 21:19:34 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src17.csv
[Sun May 27 21:19:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Sun May 27 21:19:34 2012] Fit fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sun May 27 23:58:38 2012] Warning, spatial fit 17 centroid is now closest to src. 44
[Sun May 27 23:58:38 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:38 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:38 2012] Source does appear to be extended
[Sun May 27 23:58:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 01:25:50 2012] XMMSAS src. selection expression = ellipse(23711.684000, 23217.828000, 918.810026, 918.810026, 0.000000, X, Y)
[Mon May 28 01:25:50 2012] Writing source region out to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src43_src.reg
[Mon May 28 01:25:50 2012] Extracting stamp from image fullrun_mos1_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (220, 215) - (326, 320)
[Mon May 28 01:25:50 2012] XMMSAS bgd. selection expression = annulus(23711.684000, 23217.828000, 1531.350044, 3062.700088, X, Y) && !ellipse(25449.152120, 25570.557800, 398.060011, 398.060011, 0.000000, X, Y) && !ellipse(27434.364044, 25960.780304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22855.788000, 22515.154000, 2450.160071, 2450.160071, 0.000000, X, Y) && !ellipse(24378.248000, 23650.590000, 1168.680034, 1168.680034, 0.000000, X, Y) && !ellipse(25001.048000, 24163.562000, 2337.360067, 2337.360067, 0.000000, X, Y) && !ellipse(25974.360000, 24812.084000, 1126.632032, 1126.632032, 0.000000, X, Y)
[Mon May 28 01:25:50 2012] Writing fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src43.gif
[Mon May 28 01:36:03 2012] Mean detx,y = (-2286.59, -4770.34) 
[Mon May 28 01:36:04 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 01:36:11 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 01:36:11 2012] Setting source spectrum file to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon May 28 01:36:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Mon May 28 05:54:36 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:36 2012] Error reading totcts from fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon May 28 05:54:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:36 2012] Using photon index=1.80, rate=0.00579, arf fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src43.arf
[Mon May 28 05:54:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:36 2012] Updating source flux to 8.1e-14
[Mon May 28 05:54:38 2012] Flag c found in src. 43 procflags, skipping spectral fitting