[Sun May 27 11:30:17 2012] Detection parameters:
  Position = (278.7, 270.9) = 11 4 50.01 38 9 15.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 57.3 +/- 10.9
  Background counts = 11.7
  Rate = 0.004 +/- 0.0007

[Sun May 27 11:30:17 2012] Off-axis axis estimate = 2.46'
[Sun May 27 12:55:35 2012] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting
[Sun May 27 12:55:35 2012] Initial guess for spatial extent in simple fitting = 7.66"
[Sun May 27 12:55:35 2012] source mask rpix=1.8, npix_max = 20, mask sum = 20, frac = 0.979
[Sun May 27 12:55:35 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 7.66"
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src21.ximg exists
[Sun May 27 15:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src21.csv
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src21_1.ximg exists
[Sun May 27 15:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src21.csv
[Sun May 27 15:07:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 15:07:36 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Sun May 27 15:07:36 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Sun May 27 15:07:36 2012] Fit fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Sun May 27 18:50:28 2012] Warning, spatial fit 21 centroid is now closest to src. 43
[Sun May 27 18:50:28 2012] Spatial fit model total counts = 291.679000, observed total counts = 292.000000
[Sun May 27 18:50:28 2012] Offset between fit and detection position for source 42 = 2.547557 pixels
[Sun May 27 18:50:28 2012] Warning, changing simple spatial fit ID from 21 to 23
[Sun May 27 18:50:28 2012] 307.428300 total counts/ 217.780000 bgd. counts: snr = 6.074815
Spatial fit parameters:
  Offset between fit and detection position for source 42 = 2.547557 pixels
  Position = (280.8, 272.4) = 11 4 49.26 38 9 22.9
  Extent = 14.6 (14.6-29.2)", rotation angle = 0
  Source counts = 89.6 +/- 17.5
  Background counts = 217.8
  Rate = 0.005 +/- 0.0009
[Sun May 27 18:50:28 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:28 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:28 2012] Source does appear to be extended
[Sun May 27 18:50:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 18:50:28 2012] Source is confused with source 43
[Sun May 27 18:50:28 2012] Source is confused with source 41
[Sun May 27 19:55:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 19:55:20 2012] Initial guess for spatial extent in simple fitting = 14.61"
[Sun May 27 19:55:20 2012] source mask rpix=3.4, npix_max = 59, mask sum = 56, frac = 0.940
[Sun May 27 19:55:20 2012] Giving source the simple spatial ID 18 for pass 1, mean size = 14.61"
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src18.ximg exists
[Sun May 27 21:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src18.csv
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src18_1.ximg exists
[Sun May 27 21:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src18.csv
[Sun May 27 21:19:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src18.ximg exists
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src18_1.ximg exists
[Sun May 27 21:19:34 2012] Fit fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src18 appears to have run properly
[Sun May 27 23:58:38 2012] Warning, spatial fit 18 centroid is now closest to src. 41
[Sun May 27 23:58:38 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:38 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:38 2012] Source does appear to be extended
[Sun May 27 23:58:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 01:25:50 2012] XMMSAS src. selection expression = ellipse(24378.248000, 23650.590000, 876.510025, 876.510025, 0.000000, X, Y)
[Mon May 28 01:25:50 2012] Writing source region out to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src42_src.reg
[Mon May 28 01:25:50 2012] Extracting stamp from image fullrun_mos1_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (230, 222) - (331, 323)
[Mon May 28 01:25:50 2012] XMMSAS bgd. selection expression = annulus(24378.248000, 23650.590000, 1460.850042, 2921.700084, X, Y) && !ellipse(29507.856300, 27422.144800, 2512.080072, 2512.080072, 0.000000, X, Y) && !ellipse(25449.152120, 25570.557800, 398.060011, 398.060011, 0.000000, X, Y) && !ellipse(27434.364044, 25960.780304, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22855.788000, 22515.154000, 2450.160071, 2450.160071, 0.000000, X, Y) && !ellipse(23711.684000, 23217.828000, 1225.080035, 1225.080035, 0.000000, X, Y) && !ellipse(25001.048000, 24163.562000, 2337.360067, 2337.360067, 0.000000, X, Y) && !ellipse(25974.360000, 24812.084000, 1126.632032, 1126.632032, 0.000000, X, Y)
[Mon May 28 01:25:50 2012] Writing fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src42.gif
[Mon May 28 01:36:13 2012] Mean detx,y = (-2324.78, -3922.01) 
[Mon May 28 01:36:14 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 01:36:21 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 01:36:22 2012] Setting source spectrum file to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon May 28 01:36:22 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src42_bgd.pi.gz
[Mon May 28 02:28:25 2012] Not generating rmf since there are only 89 counts
[Mon May 28 02:28:25 2012] rmf not generated due to insufficient counts
[Mon May 28 05:54:36 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:36 2012] Error reading totcts from fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src42_src_b10.pi.gz
[Mon May 28 05:54:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:36 2012] Using photon index=1.80, rate=0.00463, arf fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src42.arf
[Mon May 28 05:54:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:36 2012] Updating source flux to 6.3e-14
[Mon May 28 05:54:38 2012] Flag c found in src. 42 procflags, skipping spectral fitting
[Mon May 28 05:54:38 2012] Source 42 has fewer than 100.000000 counts, skipping spectral fitting