[Sun May 27 11:30:16 2012] Detection parameters:
  Position = (276.9, 402.4) = 11 4 50.70 38 18 48.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 39.8 +/- 8.7
  Background counts = 7.7
  Rate = 0.003 +/- 0.0006

[Sun May 27 11:30:17 2012] Off-axis axis estimate = 7.70'
[Sun May 27 12:55:35 2012] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Sun May 27 12:55:35 2012] Initial guess for spatial extent in simple fitting = 10.28"
[Sun May 27 12:55:35 2012] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.885
[Sun May 27 12:55:35 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 10.28"
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src31.ximg exists
[Sun May 27 15:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src31.csv
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src31_1.ximg exists
[Sun May 27 15:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src31.csv
[Sun May 27 15:07:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 15:07:36 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Sun May 27 15:07:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun May 27 15:07:36 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Sun May 27 15:07:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src31.csv
[Sun May 27 15:07:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 18:50:28 2012] Spatial fit model total counts = 245.754000, observed total counts = 226.000000
[Sun May 27 18:50:28 2012] Offset between fit and detection position for source 27 = 0.721506 pixels
[Sun May 27 18:50:28 2012] Warning, changing simple spatial fit ID from 31 to 10
[Sun May 27 18:50:28 2012] 248.393120 total counts/ 240.147000 bgd. counts: snr = 0.532122
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 0.721506 pixels
  Position = (276.6, 401.7) = 11 4 50.82 38 18 45.5
  Extent = 2.5 (2.5-5.4)", rotation angle = 0
  Source counts = 8.2 +/- 15.8
  Background counts = 240.1
  Rate = 0.0004 +/- 0.0008
  Deleting source due to low Poisson probability