[Sun May 27 11:30:15 2012] Detection parameters:
  Position = (117.1, 290.2) = 11 5 49.65 38 10 40.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.1 +/- 14.2
  Background counts = 4.5
  Rate = 0.007 +/- 0.0007

[Sun May 27 11:30:17 2012] Off-axis axis estimate = 13.16'
[Sun May 27 12:55:35 2012] Using EEF radius (= 13.01 ")to estimate initial spatial extent for simple fitting
[Sun May 27 12:55:35 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun May 27 12:55:35 2012] Initial guess for spatial extent in simple fitting = 13.01"
[Sun May 27 12:55:35 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.005
[Sun May 27 12:55:35 2012] Giving source the simple spatial ID 11 for pass 0, mean size = 13.01"
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src11.ximg exists
[Sun May 27 15:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src11.csv
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src11_1.ximg exists
[Sun May 27 15:07:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src11.csv
[Sun May 27 15:07:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Sun May 27 15:07:35 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Sun May 27 15:07:35 2012] Fit fullrun_mos1_xmm0153950701_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Sun May 27 18:50:28 2012] Spatial fit model total counts = 172.552000, observed total counts = 171.000000
[Sun May 27 18:50:28 2012] Offset between fit and detection position for source 10 = 0.475163 pixels
[Sun May 27 18:50:28 2012] 175.274400 total counts/ 75.565200 bgd. counts: snr = 11.470288
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.475163 pixels
  Position = (117.4, 290.5) = 11 5 49.54 38 10 40.6
  Extent = 6.7 (5.7-8.0)", rotation angle = 0
  Source counts = 99.7 +/- 13.2
  Background counts = 75.6
  Rate = 0.005 +/- 0.0007
[Sun May 27 18:50:28 2012] Vigneting correction estimate = 1.000000
[Sun May 27 18:50:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 18:50:28 2012] Assessing source extent using major axis lower bound
[Sun May 27 18:50:28 2012] Source does appear to be extended
[Sun May 27 18:50:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 27 19:55:20 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 27 19:55:20 2012] Initial guess for spatial extent in simple fitting = 6.72"
[Sun May 27 19:55:20 2012] source mask rpix=1.5, npix_max = 16, mask sum = 20, frac = 1.196
[Sun May 27 19:55:20 2012] Giving source the simple spatial ID 11 for pass 1, mean size = 6.72"
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src11.ximg exists
[Sun May 27 21:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src11.csv
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src11_1.ximg exists
[Sun May 27 21:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src11.csv
[Sun May 27 21:19:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src11.ximg exists
[Sun May 27 21:19:34 2012] fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src11_1.ximg exists
[Sun May 27 21:19:34 2012] Fit fullrun_mos1_xmm0153950701_pi300-10000_cl_pass1_tfrozen_src11 appears to have run properly
[Sun May 27 23:58:38 2012] Spatial fit model total counts = 158.287000, observed total counts = 159.000000
[Sun May 27 23:58:38 2012] Offset between fit and detection position for source 10 = 0.032944 pixels
[Sun May 27 23:58:38 2012] 161.622300 total counts/ 65.881100 bgd. counts: snr = 11.795557
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.032944 pixels
  Position = (117.4, 290.5) = 11 5 49.53 38 10 40.5
  Extent = 6.6 (5.3-8.1)", rotation angle = 0
  Source counts = 95.7 +/- 12.7
  Background counts = 65.9
  Rate = 0.005 +/- 0.0007
[Sun May 27 23:58:38 2012] Vigneting correction estimate = 1.000000
[Sun May 27 23:58:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 27 23:58:38 2012] Assessing source extent using major axis lower bound
[Sun May 27 23:58:38 2012] Source does appear to be extended
[Sun May 27 23:58:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon May 28 01:25:50 2012] XMMSAS src. selection expression = ellipse(10164.303200, 25225.300400, 398.856011, 398.856011, 0.000000, X, Y)
[Mon May 28 01:25:50 2012] Writing source region out to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src10_src.reg
[Mon May 28 01:25:50 2012] Extracting stamp from image fullrun_mos1_xmm0153950701_pi300-10000_cl_sm2.00.img.gz, (94, 268) - (140, 313)
[Mon May 28 01:25:50 2012] XMMSAS bgd. selection expression = annulus(10164.303200, 25225.300400, 664.760019, 1329.520038, X, Y)
[Mon May 28 01:25:50 2012] Writing fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src10.gif
[Mon May 28 01:34:32 2012] Mean detx,y = (7387.18, -14460.86) 
[Mon May 28 01:34:32 2012] Setting backscal keywords in source and bgd. spectrum
[Mon May 28 01:34:40 2012] Binned source spectrum to 10 counts/bin
[Mon May 28 01:34:40 2012] Setting source spectrum file to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon May 28 01:34:40 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Mon May 28 02:14:47 2012] Not generating rmf since there are only 95 counts
[Mon May 28 02:14:47 2012] rmf not generated due to insufficient counts
[Mon May 28 05:54:36 2012] Updating aperture counts using extracted products
[Mon May 28 05:54:36 2012] Error reading totcts from fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Mon May 28 05:54:36 2012] Calculating source flux in energy range 0.30-8.00
[Mon May 28 05:54:36 2012] Using photon index=1.80, rate=0.00494, arf fullrun_mos1_xmm0153950701_pi300-10000_pass1_cl_src10.arf
[Mon May 28 05:54:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon May 28 05:54:36 2012] Updating source flux to 2.2e-13
[Mon May 28 05:54:38 2012] Source 10 has fewer than 100.000000 counts, skipping spectral fitting